Genie Z80/60 Service Manual page 58

Section 3 • Scheduled Maintenance Procedures
CHECKLIST B PROCEDURES
B-6
Perform Engine Maintenance -
Deutz, Perkins and Continental
Models
Engine specifications require that this procedure
be performed every 250 hours.
Deutz Models:
Required maintenance procedures and additional
engine information are available in the
Deutz 913 Operation Manual
(Deutz part number 0297 7341)
Deutz 913 Operation Manual
Genie part number
Perkins Models:
Required maintenance procedures and additional
engine information are available in the
Perkins 704-30 User's Handbook
(Perkins part number TPD 1336E) OR the
Perkins 804C-33 Operation and Maintenance
Manual (Perkins part number SEBU7853-00).
Perkins 704-30 User's Handbook
Genie part number
Perkins 804C-33 Operation and Maintenance Manual
Genie part number
3 - 24
Continental Models:
Required maintenance procedures and additional
engine information are available in the
Continental TME27 Owner's Manual
(Continental part number WM10303).
Continental TME27 Owner's Manual
Genie part number
To access the engine:
1 Remove the engine tray retaining fastener
located under the engine tray. Swing the engine
tray out and away from the machine.
2 Install the fastener that was just removed
through the engine tray and into the engine tray
anchor hole in the turntable.
62446
101840
111332
Z-80/60
Crushing hazard. Failure to install
the fastener into the engine tray
anchor hole to secure the engine
tray from moving could result in
death or serious injury.
Part No. 88619
June 2011
REV G
111901