G Machine Specifications - Genie Z80/60 Service Manual

February 2015
REV G
Machine Specifications
Tires and wheels
Tire size
(foam filled and non-marking)
Tire size
(Hi-flotation)
Tire ply rating
(foam filled and non-marking)
Tire weight, new foam-filled (minimum)
(Rough terrain)
Tire ply rating
(Hi-flotation)
Overall tire diameter
(foam filled and non-marking)
Overall tire diameter
(Hi-flotation)
Wheel diameter
(foam filled and non-marking)
Wheel diameter
(Hi-flotation)
Wheel width
(foam filled, non-marking and Hi-flotation)
Tire Pressure (Hi-flotation)
Wheel lugs
Lug nut torque, lubricated
Lug nut torque, dry
For operational specification, refer to the
Operator's Manual.
Part No. 88619
Fluid capacities
Fuel tank
LPG tank
18-625 FF
Hydraulic tank
445D50/70
Hydraulic system
16
(including tank)
622 lbs
Drive hubs
282 kg
(before serial number 958)
Drive hubs
14
(after serial number 957)
40.7 in
Turntable rotation drive hub
103.3 cm
45.47 in
115.5 cm
Drive hub oil type:
24.5 in
62.2 cm
28 in
71.1 cm
15 in
38.1 cm
80 lbs / 5.5 bar
3
10 @ / -16
4
320 ft-lbs
434 Nm
420 ft-lbs
570 Nm
Continuous improvement of our products is a
Genie policy. Product specifications are
subject to change without notice.
Z-80/60
Section 2 • Specifications
Specifications
EP 80-90W gear oil
API Service Classification GL5
35 gallons
132.5 liters
33.5 lbs
15.2 kg
45 gallons
170 liters
80 gallons
303 liters
50 fl oz
1.5 liters
44 fl oz
1.3 liters
40 fl oz
1.2 liters
2 - 1