Perform Pre-Operation Inspection; Perform Function Tests; Perform Engine Maintenance (If Equipped) - Genie TZ-50 Service Manual

September 2014
A-2
Perform Pre-operation
Inspection
Completing a Pre-operation Inspection is essential
to safe machine operation. The Pre-operation
Inspection is a visual inspection performed by the
operator prior to each work shift. The inspection is
designed to discover if anything is apparently wrong
with a machine before the operator performs the
function tests. The Pre-operation Inspection also
serves to determine if routine maintenance
procedures are required.
Complete information to perform this procedure is
available in the appropriate operator's manual. Refer
to the Operator's Manual on your machine.
A-3

Perform Function Tests

Completing the function tests is essential to safe
machine operation. Function tests are designed to
discover any malfunctions before the machine is
put into service. A malfunctioning machine must
never be used. If malfunctions are discovered, the
machine must be tagged and removed from
service.
Complete information to perform this procedure is
available in the appropriate operator's manual. Refer
to the Operator's Manual on your machine.
Part No. 824982
Section 3 • Scheduled Maintenance Procedures
A-4
Perform Engine Maintenance
(if equipped)
Engine specifications require that this procedure be
performed every 8 hours or daily, whichever comes
first.
• Check oil level
• Check air cleaner
Required maintenance procedures and additional
engine information is available in the Honda
GX160 Engine Owner Manual
(Honda part number 31ZH7630).
Honda GX160 Owner's Manual
Genie part number
Genie TZ-50
CHECKLIST A PROCEDURES
97228
3 - 7