Ozone Release; Electromagnetic Interference; For European Users - Konica Minolta bizhub pro c500 User Manual

KONICA MINOLTA BUSINESS TECHNOLOGIES, INC.
1-6-1, Marunouchi, Chiyoda-ku, Tokyo, Japan
MANUFACTURED: KHK
THIS PRODUCT COMPLIES WITH 21 CFR
CHAPTER I, SUBCHAPTER J
m Ozone Release
During print operation, a small quantity of ozone is released. This amount is not large
enough to harm anyone adversely. However, be sure the room where the machine is
being used has adequate ventilation, especially if you are printing a high volume of
materials, or if the machine is being used continuously over a long period.
m Electromagnetic Interference
This product must be used with a shielded network cable and shielded USB interface
cable.
The use of non-shield cables is likely to result in interference with radio
communications and is prohibited under CISPR 22 and local rules.
m For European Users
This product complies with the following EU directives:
89/336/EEC, 73/23/EEC and 93/68/EEC
This declaration is valid for the areas of the European Union (EU) or EFTA only.
This device must be used with a shielded network cable and shielded USB interface
cable. The use of non-shielded cables is likely to result in interference with radio
communications and is prohibited under 89/336/EEC rules.
m For German Users
Maschinenlarminformations -Verordnung - 3. GSGV, 18.01.1991:
Der arbeitsplatzbezogene Immisionswert betraegt 70 dB(A) oder weniger nach ISO
7779.
CLASS 1 LASER PRODUCT
APPAREIL A RAYONNEMENT
LASER DE CLASSE 1
LASER KLASSE 1 PRODUKT
Regulation Notices (continued)
1-9