Erasing Outside Of The Original (Non-Image Area Erase) - Konica Minolta bizhub pro c500 User Manual

Erasing Outside of the Original (Non-Image Area Erase)

The Non-image area erase mode is used to copy non standard or special originals,
such as books, magazines, paste-ups, graphs, thick or thin materials, etc. from the
platen glass. The exposed glass area outside the borders of the original will not be
copied.
Specifications for Non-Image Area Erase
❒ Use the platen glass only. Keep RADF open throughout the procedure.
❒ Incompatible Conditions: Using RADF, 2a2, 2a1, APS, AMS, Rotation,
Rotation Sort, Rotation Group, Fold/Stitch&Fold/Trimming (with Booklet
selected), Mixed Original, Z-Folded Original, Tab Paper, Sheet/Cover Insertion,
Chapter, Combination, Booklet, Image Insert, Dual Page in RADF Store mode,
Multi-Page Enlargement, Reverse Image, Reduce & Shift in Image Shift,
Storing Image in Overlay Memory
Set original
1.
Touch APPLICATION on the Basic Screen.
When starting a new copying job, be sure to close the RADF securely, then
press [AUTO RESET].
2.
Touch Non-image Area Erase on the Application Selection Screen.
The incompatible function keys will be dimmed to show inactivity.
3.
Touch OK on the Application Selection Screen.
The Basic Screen will be restored.
10-30
Non-Image Area Erase
General copying