Registering an FTP server as a destination ..................6-10 6.8.2 Registering an SMB server as a destination..................6-11 Service Port Device Setting ......................6-11 6.9.1 Service Port Device Setting: Selecting whether or not to use a service port device......6-11 6.10 ADF Mode Default Setting......................6-12 bizhub PRO 1100 Contents-1...
Page 3
6.11 [Scan Meas.] adjustment......................6-12 Trademarks and Copyrights SOFTWARE LICENSE AGREEMENT ..................... 7-2 Contents-2 bizhub PRO 1100...
Mode Check on the control panel to display the [Program Job Edit] screen. There is no limit to the number of jobs that can be loaded. However, up to 10,000 pages can be loaded. A program job cannot be registered in the [Copy Mode Memory]. bizhub PRO 1100...
Page 6
Application Press [Application] on the [COPY] screen. The [Application] screen is displayed. Press [Program Job]. The incompatible function keys will be dimmed to show inactivity. bizhub PRO 1100...
Page 7
The [Program Job] icon and shortcut key are displayed under [Application] on the [COPY] screen. And, [Separate Scan] is automatically selected. Position the original. Press Start on the control panel. The original is loaded. When loading is completed, the [Program Job Edit] screen is displayed. bizhub PRO 1100...
Page 8
For the setting procedure, refer to [Saving and Editing Jobs] ) [Hold Job and Save on HDD] ) [Hold Job Screen] ) [Job Ticket Edit Screen] in the HTML User's Guide. Press either [Bunch Done] or [Done&Division]. [Bunch Done]: Press this button to combine the loaded jobs and define them as a single job. bizhub PRO 1100...
Page 9
% When the last original is loaded, press [Complete All]. Output processing starts. % To change copy conditions after combining all jobs, press [Complete/Edit] to display the [Program Job Edit] screen as shown below. After the change has been completed, press [Complete All]. bizhub PRO 1100...
Page 10
[Complete All] or you press [Bunch Done] on the [Program Job Edit] screen that is displayed by pressing [Complete/Edit], press Mode Check on the control panel to return to the [Program Job Edit] screen. Press [Complete All] to output job data. bizhub PRO 1100...
[Adding/Editing the Paper Con- ditions Registration] [Deleting the Paper Conditions] [Importing Paper Setting Data] [Exporting Paper Setting Data] Step 2 in items above On the [User Setting Menu] screen, press [System Setting] ) [Paper Tray Setting] ) [Paper Setting]. bizhub PRO 1100...
Page 14
Paper Setting: Registering the Paper Conditions Press [Paper Profile Setting]. The [Register/Delete Paper Setting] screen is displayed. % After this, read the user's guide while shifting steps one by one. bizhub PRO 1100...
Page 15
Paper Setting: Registering the Paper Conditions MEMO bizhub PRO 1100...
Adding the Preset Profile to the Paper Profile Press Utility/Counter on the control panel to display [UTILITY], then press [User Setting] to display the [User Setting Menu] screen. On the [User Setting Menu] screen, press [System Setting] ) [Paper Tray Setting] ) [Paper Setting]. bizhub PRO 1100...
Page 18
Paper Tray Setting Press [Preset Profile Management]. The [Preset Profile Management] screen is displayed. Select the preset profiles to add, then press [Add Profile]. The preset profiles are marked by bizhub PRO 1100...
Page 19
Deleting the Preset Profiles Press Utility/Counter on the control panel to display [UTILITY], then press [User Setting] to display the [User Setting Menu] screen. On the [User Setting Menu] screen, press [System Setting] ) [Paper Tray Setting] ) [Paper Setting]. bizhub PRO 1100...
Page 20
Paper Tray Setting Press [Preset Profile Management]. The [Preset Profile Management] screen is displayed. Select the preset profiles to delete, then press [Delete]. bizhub PRO 1100...
Page 21
Searching for the Preset Profiles or Paper Profiles Press Utility/Counter on the control panel to display [UTILITY], then press [User Setting] to display the [User Setting Menu] screen. On the [User Setting Menu] screen, press [System Setting] ) [Paper Tray Setting] ) [Paper Setting]. bizhub PRO 1100...
Page 22
Press [Preset Profile] or [Paper Profile] to suit the profile to be searched. The preset profiles are marked by % The paper profile added from the preset profile is also marked by . If the profile is edited and saved, it is not marked by bizhub PRO 1100...
Page 23
Paper Tray Setting Press [SearchCondition]. The [Profile Search Condition] screen is displayed. Specify search conditions, then press [Search]. bizhub PRO 1100...
Page 25
% Select the desired one from [F1] to [F6] as a shortcut key you want to register Copy Mode Memory in, select the desired one from [01] to [30] as a button that has a copy condition registered, then press [<<Entry]. % To display buttons [11] to [20] or [21] to [30], press [,] or [+]. bizhub PRO 1100...
Page 26
[Mode Memory: Register/Call Scan Settings] [Storing Scan Conditions] in the HTML User's Guide. Press [OK] to complete the setting. % To cancel the change, press [Cancel]. In either case, the display returns to the [Shortcut Key Reg- ister Menu] screen. bizhub PRO 1100...
Page 27
[Mode Memory: Register/Call Save Settings] [Stor- ing save conditions] in the HTML User's Guide. Press [OK] to complete the setting. % To cancel the change, press [Cancel]. In either case, the display returns to the [Shortcut Key Reg- ister Menu] screen. bizhub PRO 1100...
When Enhanced Security Mode is set to ON, the following functions are set and restricted synchronously. IPSec is also set to ON synchronously. At this time, IPSec is set to the default; therefore, change the setting to suit your environment. SSL is not available. bizhub PRO 1100...
Press Utility/Counter on the control panel to display [UTILITY], then press [Administrator Setting] to display the [Administrator Setting Menu] screen. On the [Administrator Setting Menu] screen, press [Security Setting] ) [Service Login Allow Setting]. The [Service Login Allow Setting] screen is displayed. bizhub PRO 1100...
When Enhanced Security Mode is set to ON, specify the address of the WebDAV server to send audit logs to. Press Utility/Counter on the control panel to display [UTILITY], then press [Administrator Setting] to display the [Administrator Setting Menu] screen. bizhub PRO 1100...
Page 32
Press [ON] in [Audit Log Trans.], then configure the WebDAV server setting. For the WebDAV server setting, refer to [Settings and Adjustments] ) [Utility/Counter] ) [Scan Address Register] ) [Registering a WebDAV Server as a Destination] in the HTML User's Guide. bizhub PRO 1100...
Audit Log Manual Transmission Audit logs are automatically sent in general use, but they can be sent manually if necessary. On the [Administrator Setting Menu] screen, press [Security Setting] ) [Audit Log Setting] ) [Audit Log Manual Trans.]. bizhub PRO 1100...
Page 34
Transmitting Audit Log Press [Transmission]. Press [Yes]. When message [Transmitted audit log] is displayed, transmission is completed. bizhub PRO 1100...
Administrator ID / Unreg- OK/NG istered ID Change the HDD encryption password Administrator ID / Unreg- OK/NG istered ID Usage of management functions and protection of security function operating environment Execute ISW CE ID / Administrator ID OK/NG bizhub PRO 1100...
Possible troubles in outputting all audit log data to USB flash drive [Security] ) [Enhanced Security * Audit log output to a USB flash drive became unavailable. Mode] ) [Audit Log] ) [Possible troubles in outputting all audit log data to USB flash drive] bizhub PRO 1100...
Page 37
Possible Troubles in Outputting all Audit Log Data to USB Flash Drive MEMO 5-10 bizhub PRO 1100...
Installer] ) [Installing the PS Plug-in Driver] Step 8 Select [On] or [Off] to set the default of 2-sided printing, then click [Next]. % [Off]: Sets the default to Off (1-Sided). % [On]: Sets the default to On (2-Sided). bizhub PRO 1100...
[Utility/Counter] ) [Administrator Setting] ) [Network settings] ) [NIC Setting: Setting the Machine Network Information] ) [NIC Set- ting Menu: Configuring the Net- work Information of the Controller] ) [List of NIC Setting] In the table (Hot Folder Setting) bizhub PRO 1100...
[Group] is selected: Off: Changed to the [Sort] setting On: Remains set to [Group]. Specifications If [Sort] is selected from the application, Word, using the PPD driver when On is selected, it is forcibly changed to [Group]. bizhub PRO 1100...
Page 42
This printing stop phenomenon may be ple jobs (2 to 10 copies) sent from the resolved by extending the job-end de- VPSX server. tection range. Setting value Off: Does not extend the job-end de- tection range. On: Extends the job-end detection range. bizhub PRO 1100...
When the last scan is completed, cancel [Separate Scan]. [Bind Direction] [Right&Left], [Top] [Direction] [Normal], [Left], [Upside-Down], [Right] [Type] [Text/Photo(Print)], [Text/Photo(Photo)], [Photo(Print)], [Photo(Photo)], [Text], [Dot Matrix] [Special] [Normal], [Same Width], [Different Width], [Z-Folded] bizhub PRO 1100...
Page 44
If blank pages are not correctly detected while the original is scanned with [BlankPage Removal] enabled, ad- just the level to detect blank pages. For details, refer to "6.5.2 Copy Setting: Setting the Various Operations When Copying". Reference [BlankPage Removal] is not available when [Same Width], [Different Width], or [Z-Folded] is selected. bizhub PRO 1100...
<HTML User's Guide> Operation with the operation button changed and added. [COPY] ) [Basic Settings] ) [Pa- per Setting] ) [Paper Setting: * For details, refer to the following. Setting Paper for Tray] Steps 5 and 6 bizhub PRO 1100...
Page 46
Pressing [Change Set] or [New Setting] displays the [Change IndividualSet] screen to change the spec- ifications individually. Proceed to step 11. % Pressing [Change Set] displays the current setting. % Pressing [New Setting] displays the defaults on the machine. bizhub PRO 1100...
You can register up to 30 FTP You can register up to 150 FTP [Settings and Adjustments] ) servers. servers. [Utility/Counter] ) [Scan Ad- dress Register] ) [Registering an FTP Server as a Destination] Supplemental statement under lead sentence 6-10 bizhub PRO 1100...
Addition of [UK], [FR], [IT], [DE], and [ES] buttons to the [Service Port [Settings and Adjustments] ) Device Setting] screen [Utility/Counter] ) [User Setting] ) [System Setting] ) [Service Port Device Setting: Selecting Whether or Not to Use a Service Port Device] Screen of step 3 Incorrect Correct bizhub PRO 1100 6-11...
GNU Lesser General Public License as published by the Free Software Foundation; either version 2.1 of the License, or any later version. This library is distributed in the hope that it will be useful, but WITHOUT ANY bizhub PRO 1100...
Page 52
* SUCH DAMAGE. Copyright (c) 2012, Brice Videau <brice.videau@imag.fr> Copyright (c) 2012, Vincent Danjean <Vincent.Danjean@ens-lyon.org> All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: bizhub PRO 1100...
Page 53
DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. bizhub PRO 1100...
Page 54
To achieve this, non-free programs must be allowed to use the library. A more frequent case is that a free library does the same job as widely used non-free libraries. In this bizhub PRO 1100...
"work that uses the Library" with the Library to produce a work containing portions of the Library, and distribute that work under terms of your choice, provided that the terms permit modification of the work for the customer's own use and reverse bizhub PRO 1100...
Page 56
RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE LIBRARY TO OPERATE WITH ANY OTHER SOFTWARE), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. bizhub PRO 1100...
Page 57
SHALL THE COPYRIGHT HOLDERS OR ANYONE DISTRIBUTING THE SOFTWARE BE LIABLE FOR ANY DAMAGES OR OTHER LIABILITY, WHETHER IN CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. bizhub PRO 1100...