Konica Minolta bizhub pro c500 User Manual page 259

Programming Different Settings for an Output Job (Program Job) (continued)
2.
Touch Program Job on the Application Selection Screen.
The incompatible function keys will be dimmed to show inactivity.
3.
Touch OK on the Application Selection Screen.
The Basic Screen will be restored.
The STORE key on the Basic Screen appears highlighted to show that the
Store mode is automatically selected.
4.
Select the desired copy conditions.
5.
Position originals FACE UP in the document feeder or FACE DOWN
on the platen glass.
If the number of document feeder originals exceeds 100, divide them into
blocks not exceeding 100 sheets and load them from the block with the first
page.
6.
Press [START].
The paper size determined at this time will be applied to all subsequent
JOBs.
When scanning for the current JOB is completed, the popup menu will be
displayed in the Basic Screen.
7.
Touch DECISION.
The current JOB images will be stored.
To delete the images, touch CANCEL.
10-25