Punching File Holes In Copies (Punch) - Konica Minolta bizhub pro c500 User Manual

Punching File Holes in Copies (Punch)

The Punch mode is available only when the PK-507/PK-508 Punching kit option is
installed on the FS-513/FS-606 finisher.
When the Punch mode is selected in combination with any of the Primary (Main) tray
output modes, each copied sheet is punched and output to the Primary tray
according to the selected output mode.
• Some staple positions previously selected may conflict with this function.
• Special size paper (STD size (special), Non STD size, Wide size paper)
cannot be punched.
• If the ATS (Automatic Tray Switching) functions while the machine uses the
Punch mode, the punch holes may be slightly off the appropriate positions.
• Do not punch special paper type such as labels, tabbed sheets, etc.
Otherwise, machine trouble may occur in Punching kit.
• Be sure that the paper guides of the paper tray are securely aligned to the
paper; otherwise the copies may not be punched in position.
Specifications for Punch Mode
❒ Copy paper size: A3, B4, F4, A4, B5 (80 g/m
❒ Paper weight:
❒ Number of holes: 4 holes
❒ Hole diameter: 6.5 mm ± 0.5 mm
❒ Hole pitch: 80 mm ± 0.5 mm
❒ Incompatible Conditions: Using platen glass (available when using Platen store
mode), Rotation Sort, Rotation Group, Fold, Stitch & Fold, Three-Fold, Cover
Sheet mode, Output modes using secondary tray, Mixed Original (A4R, B5
mixed), Copy insertion mode in Chapter, Cover sheet mode in Booklet
1.
Touch OUTPUT MENU on the Basic Screen to display the
Output Mode popup menu.
2
64 g/m ~ 128 g/m
80 mm
2
paper recommended)
2
8-11