Positioning Originals; Positioning Originals In Radf - Konica Minolta bizhub pro c500 User Manual

Positioning Originals

Set the originals in the RADF or on the platen glass to copy.

Positioning Originals in RADF

The document feeder (RADF) automatically feeds up to 100 originals directly to the
platen area, starting with the top sheet. The RADF should only be used for
unstapled, smooth, flat originals.
See p. 12-10 for details of the original sizes available in the RADF.
Positioning originals in Normal mode
1.
Arrange originals in order.
2.
Position original(s) FACE UP in the document feeder tray.
Place two-sided originals with page one FACE UP.
The direction of the originals should conform to the Original direction icon
displayed at the upper left corner of the Basic Screen.
Up to 100 originals can be set at a time.
• The copy result may not be satisfactory if the originals are set in wrong
direction. Be sure that the originals are set in the same direction as
indicated by the Original direction icon, especially when making double-
sided copies or using Staple, Stitch&Fold, Fold, or Booklet mode. See p. 9-
2 to p. 9-3 for details.
• Be sure not to use unsuitable RADF originals. See p. 12-9 for details.
• Do not set more than 100 originals or over the limit indicated on the paper
guides; otherwise a paper misfeed will occur to cause damage to the
originals.
Before placing originals in the tray, be sure the document feeder is closed fully.
Once closed, do not open the document feeder, otherwise the selected copy
conditions may be altered automatically.
3-4