Konica Minolta bizhub pro c500 User Manual page 71

Positioning originals in Z-Folded original mode
Z-Folded original mode detects the folded original size without using the size
detection sensor of the RADF.
• To use the Z-Folded original mode, see procedure on p. 9-10 to p. 9-11.
• See p. 12-11 for available sizes of folded originals.
1.
Arrange originals in order.
2.
Position original(s) FACE UP in the document feeder tray.
Place two-sided originals with page one FACE UP.
Up to 100 originals can be set at a time.
• Be sure not to use unsuitable RADF originals. See p. 12-9 for details.
• Do not set more than 100 originals or over the limit indicated on the paper
guides; otherwise a paper misfeed will occur to cause damage to the
originals.
Before placing originals in the tray, be sure the document feeder is closed fully.
Once closed, do not open the document feeder, otherwise the selected copy
conditions may be altered automatically.
3.
Adjust paper guides.
Positioning Originals (continued)
3-7