Konica Minolta bizhub pro c500 User Manual page 122

Checking Feature Selections / Proof Copying (Check Mode) (continued)
4.
To change the settings:
Touch the desired copying condition key on the Check Screen to highlight it.
Any key that cannot be highlighted indicates that the copying condition
cannot be changed from the Check Screen.
Touch CHANGE SETTING.
The LCD will display an appropriate screen to change the copying condition
selected.
• Selecting a basic copying condition key will display the Basic Screen.
• Selecting a Special Original Mode key will display the Special Original
popup menu.
• Selecting an Image Adjust Mode key will display the Change Image
Adjustment Setting Screen.
When BOOK MARK has been checked on a subsequent screen, selecting
the mode key will jump to that screen.
• Selecting an Application Mode key will display the Change Application
Selection Screen.
When BOOK MARK has been checked on a subsequent screen, selecting
the application function key will jump to that screen. See p. 10-2 for details.
• CHANGE SETTING will not function for the following application functions,
however they can be released by touching RELEASE SETTING: Program
Job, Non-Image Area Erase, Reverse Image, AUTO Layout, Overlay.
Change the setting as desired, then restore the Check Screen to return to
the checking steps.
From the Basic Screen, press [CHECK] to return to the Check Screen.
From the Special Original popup menu, Change Image Adjustment Setting
Screen or Change Application Selection Screen, touch OK to return to the
Check Screen.
• When making a set or sample copy, proceed to step 6.
• To start printing without proofcopying, proceed to step 8.
5.
To release the settings:
Touch the desired copying condition key on the Check Screen to highlight it,
then touch RELEASE SETTING.
The confirmation screen will appear on the Check Screen.
Touch YES to cancel the function, or NO to restore.
• If making a sample copy, proceed to the next step.
• To start printing, proceed to step 8.
4-6