Konica Minolta bizhub pro c500 User Manual page 426

5 Touch the Start key on the screen. The machine starts the adjustment automatically.
NOTE:
If no paper is left in the Multi-sheet bypass tray, the adjustment will not start
even if the Start key is touched.
The message "Completed" will be displayed when the adjustment is completed
normally.
NOTE:
If an error code (Error 1, 2, or 10) is displayed, check that the test chart is placed
properly.
If any other error code is displayed, please contact your service representative.
6 Repeat the steps 2 to 5 as desired.
7 Touch PREVIOUS SCREEN to restore the Key Operator Mode Screen.
14-58
[25] Printer Gamma Sensor Adjustment (continued)