Konica Minolta bizhub pro c500 User Manual page 15

Features of the bizhub PRO C500 (continued)
Stamp
Prints watermark, regular stamp, date/time, page number, and numbering onto the
output copies to enhance the presentation and usefulness of the copies.
Staple
Selects the stapling position and number of staples.
STD Size (Special)
Detects the standard paper sizes which cannot normally be detected when loaded in
a main body tray or Multi-sheet bypass tray.
Tab Paper
Copies onto tabbed sheets from tabbed originals, allowing the image on the tab part
of the original to be printed on the same part of the tabbed copy paper.
Three-Fold Mode for Machine with FS-606 Finisher Installed:
Folds A4 or 8.5"x11"R output copies in three.
Tray Adjustment
Performs image adjustments for printing on pages contained in a specific paper tray
and enables you to recall adjustment values from the Basic Screen.
Trimming Mode for FS-606 Finisher with TU-109 Trimmer Unit Installed:
Trim the end of folded or stitched & folded booklets.
Weekly Timer
Can be set according to the needs of each work environment. Turns main body
power Off/On daily or weekly, during lunch time, on holidays, and also enables the
Timer Interrupt mode, which allows temporary use of the machine even when the
machine is in the daily, weekly, or holiday Off mode.
Wide Size Paper
Copies onto paper slightly larger than the specified regular size.
Z-Folded Original
This feature sets the RADF to accept Z-folded originals.
xiii