JLG E600 Operation And Safety Manual page 55

2 3
1
7 9
1. Tilt
2. Platform Overload
3. System Distress
4. Posi-Track
5. Enable
Figure 3-7. Platform Control Indicator Panel w/Drive
3121217
8
4
6. Low Battery
7. Creep
8. Drive Orientation Override
9. Soft Touch Indicator
Orientation
SECTION 3 - MACHINE CONTROLS AND INDICATORS
1. Tilt Alarm Warning Light and Alarm
5
This orange illuminator indicates that the chassis is on a
slope. An alarm will also sound when the chassis is on a
slope and the boom is above horizontal. If lit when boom is
raised or extended, retract and lower to below horizontal
then reposition machine so that it is level before continuing
operation. If the boom is above horizontal and the machine
is on a slope, the tilt alarm warning light will illuminate and
- +
- +
an alarm will sound and CREEP is automatically activated.
1704239 E
1001110226A
6
IF TILT WARNING LIGHT IS ILLUMINATED WHEN BOOM IS RAISED OR EXTENDED,
RETRACT AND LOWER TO BELOW HORIZONTAL THEN REPOSITION MACHINE SO THAT
IT IS LEVEL BEFORE EXTENDING BOOM OR RAISING BOOM ABOVE HORIZONTAL.
2. Platform Overload (If Equipped)
Indicates the platform has been overloaded.
– JLG Lift – 3-15