JLG E600 Operation And Safety Manual page 53

13. Horn
If pressed, this switch supplies power to the horn.
14. Drive Orientation Override
When the boom is swung over the rear tires or further in
either direction, the Drive Orientation indicator will illumi-
nate when the drive function is selected. Push and release
the switch, and within 3 seconds move the Drive/Steer con-
trol to activate drive or steer. Before driving, locate the black/
white orientation arrows on both the chassis and the plat-
form controls and match the control direction arrow to the
intended chassis direction.
15. Soft Touch/SkyGuard Override Switch (If equipped)
The machine can be equipped with one of three options. It
may have Soft Touch, SkyGuard, or both Soft Touch and Sky-
Guard.
If equipped with Soft Touch, the switch
enables the functions that were cut out
by the Soft Touch system to operate
again at creep speed, allowing the
operator to move the platform away from the obstacle that
caused the shutdown situation.
3121217
SECTION 3 - MACHINE CONTROLS AND INDICATORS
If equipped with SkyGuard, the switch
enables functions cut out by the Sky-
guard system to be operated again,
allowing the operator to resume use of
machine functions.
If equipped with both Soft Touch and
SkyGuard, the switch operates like
described above and allows the opera-
tor to override the system that has
experienced a cutout situation.
16. Soft Touch/SkyGuard Indicator (If Equipped)
Indicates the Soft Touch bumper is against an object or the
SkyGuard sensor has been activated. All controls are cut out
until the override button is pushed. For Soft Touch, controls
are then active in the Creep Mode or for SkyGuard, controls
will work normally.
– JLG Lift – 3-13