JLG E600 Operation And Safety Manual page 49

2. Generator Enable Control (if equipped)
This switch allows the operator to prevent the generator
engine from starting to charge the batteries when using the
machine indoors.
3. Lights (If Equipped)
This switch operates accessory light packages if the machine
is so equipped.
4. Drive/Steer
The DRIVE joystick provides for driving either forward or
backward. The controller is 'ramped' to allow variable drive
speed.
Steering is controlled by a thumb operated switch on top of
the joystick.
3121217
SECTION 3 - MACHINE CONTROLS AND INDICATORS
5. Telescope Control
This switch allows extension and retraction of the main
boom.
6. Articulating Jib (If Equipped)
This switch controls the raising and lowering of the jib (up or
down).
7. Jib Rotate (If Equipped)
A three position switch permits rotation of the jib and plat-
form (left or right).
8. Platform Rotate
This switch controls the rotation of the basket (left or right).
– JLG Lift – 3-9