JLG E600 Operation And Safety Manual page 52

SECTION 3 - MACHINE CONTROLS AND INDICATORS
9. Function Speed Control
Controls the speed of Boom and Swing Functions. Rotate
CCW for slower speed and CW for faster speed. To adjust to
creep, turn knob fully CCW until it clicks.
10. Main Lift/Swing
The dual axis joystick is provided for main lift and swing.
Push forward to lift up, pull backward to lower. Move right to
swing right, move left to swing left. Proportional control of
these functions can be attained by using the Function Speed
control.
NOTE: Main lift and swing functions may be selected at the same time.
Maximum speed is reduced when both functions are selected.
3-12
11. Posi-Track Control
Activating the Posi-Track switch distributes available power
evenly between the two drive wheels for improved traction.
The control system may also engage the posi-track function
automatically when more traction is required.
NOTE: The optional 4 Wheel Assist will also engage with the Posi-Track
Control.
ONLY USE THE PLATFORM LEVELING OVERRIDE FUNCTION FOR SLIGHT LEVELING OF
THE PLATFORM. INCORRECT USE COULD CAUSE THE LOAD/OCCUPANT TO SHIFT OR
FALL. FAILURE TO DO SO COULD RESULT IN DEATH OR SERIOUS INJURY.
12. Platform Leveling Override
A three position switch allows the operator to adjust the
automatic self leveling system. This switch is used to adjust
platform level in situations such as ascending/descending a
grade.
– JLG Lift – 3121217