JLG E600 Operation And Safety Manual page 46

SECTION 3 - MACHINE CONTROLS AND INDICATORS
2. Platform/Ground Select
A three position, key operated switch supplies power to the
platform control console when positioned to PLATFORM.
With the switch key held in the GROUND position, power is
shut off to platform and only ground controls are operable.
NOTE: With PLATFORM/GROUND SELECT switch in the center position,
power is shut off to controls at both operating stations.
3. Rotate
A three position switch permits rotation of the platform.
3-6
ONLY USE THE PLATFORM LEVELING OVERRIDE FUNCTION FOR SLIGHT LEVELING OF
THE PLATFORM. INCORRECT USE COULD CAUSE THE LOAD/OCCUPANT TO SHIFT OR
FALL. FAILURE TO DO SO COULD RESULT IN DEATH OR SERIOUS INJURY.
4. Platform Leveling Override
A three position switch allows the operator to adjust the
automatic self leveling system. This switch is used to adjust
platform level in situations such as ascending/descending a
grade.
5. Boom Lift
Provides for raising and lowering of the Boom.
6. Telescope
Provides for extension and retraction of the Boom.
7. Swing
This switch provides 400 degrees non-continuous turntable
rotation. To activate SWING, position switch to LEFT or
RIGHT.
– JLG Lift – 3121217