Measured Value Correction - Ahlborn ALMEMO ZAD 900-AB Series Instruction Manual

4 Product
Extension
The universal extension cables ZA 9090-VKCxx, through which the measured
values and the programming of the plug will be transmitted serially and free from
interference via RS485 drivers, serve to extend the sensor on the measuring
device. Since there is no driver for the second port, the extension must not be
longer than 10 meters to still be able to configure the sensor menu. In case the
extension cable is used, you cannot operate the device in sleep mode.

4.7 Measured Value Correction

For the primary measuring channels, it is possible to store adjustment values or
multi-point adjustments on the D6 sensor (ex works or via the ALMEMO ®
measuring device featuring option KL). Correction values (zero point, slope, basic,
factor) are already processed in the sensor.
- 11 –