Measured Value Correction - Ahlborn ZED7 00-ABx Instruction Manual

4 Product
range can be deactivated and also reactivated as usual via the ALMEMO
The sensor is supplied via the measuring device.
Extension
D7 sensor
The extension cables ZAD7 00-VKxx are used to extend the probes on the device,
where the measured values and the plug programming are transmitted serially
interference-free via RS422 drivers. For galvanic isolation there is an additional
small adapter cable ZAD7 00-GT.

4.7 Measured value correction

For the primary measuring channels, adjustment values or a multi-point adjustment
can be stored in the D7 sensor (ex works or via V7 measuring device with option
KL). Correction values (zero point, slope, base, factor) are already processed in
the probe.
- 12 –
D7 sensor
Extension cable
ZAD700-VKxx
device.
®