Cisco ME 3800X Command Reference Manual page 364

show ipc
This example shows how to display the contents of the IPC retransmission queue:
Switch> show ipc queue
There are 0 IPC messages waiting for acknowledgement in the transmit queue.
There are 0 IPC messages waiting for a response.
There are 0 IPC messages waiting for additional fragments.
There are 0 IPC messages currently on the IPC inboundQ.
Messages currently in use
Message cache size
Maximum message cache usage
0 times message cache crossed
Emergency messages currently in use
There are 2 messages currently reserved for reply msg.
Inbound message queue depth 0
Zone inbound message queue depth 0
This example shows how to display all the IPC session statistics:
Switch# show ipc session all
Tx Sessions:
Port ID
10000.7
port_index = 0
Msgs requested = 180
10000.8
port_index = 0
Msgs requested = 0
Rx Sessions:
Port ID
10000.7
port_index = 0
No of msgs requested = 180
10000.8
port_index = 0
No of msgs requested = 0
This example shows how to display the status of the local IPC server:
Switch> show ipc status cumulative
Time last IPC stat cleared :never
This processor is the IPC master server.
Do not drop output of IPC frames for test purposes.
1000 IPC Message Headers Cached.
Total Frames
0
Total from Local Ports
Total Protocol Control Frames
Total Frames Dropped
Cisco ME 3800X and ME 3600X Switch Command Reference
-88
5000 [max]
Type Name
Unicast MDFS RP:Statistics
type = Unreliable
Msgs returned = 180
Unicast Slot 1 :MDFS.control.RIL
type = Reliable
Msgs returned = 0
Type Name
Unicast MDFS RP:Statistics
seat_id = 0x10000
Msgs returned = 180
Unicast Slot 1 :MDFS.control.RIL
seat_id = 0x10000
Msgs returned = 0
IPC System Status
0
Service Usage
: 3
: 1000
: 1000
: 0
last sent = 0 last heard = 0
last sent = 0 last heard = 0
last sent = 0 last heard = 0
last sent = 0 last heard = 0
Rx Side Tx Side
12916
13080
116
0
Chapter
608
574
17
0
OL-28238-01