Debug Ip Igmp Snooping - Cisco ME 3800X Command Reference Manual

Appendix B Cisco ME 3800X and ME 3600X Switch Debug Commands

debug ip igmp snooping

To enable debugging of Internet Group Management Protocol (IGMP) snooping activity, use the debug
igmp snooping command in privileged EXEC mode. To disable debugging, use the no form of this
command.
Syntax Description ip_address
group
management
querier
redundancy
router
timer
Defaults
Debugging is disabled.
Command Modes
Privileged EXEC
Command History Release
12.2(52)EY
Usage Guidelines
The undebug ip igmp snooping command is the same as the no debug ip igmp snooping command.
Related Commands Command
show debugging
OL-28238-01
debug ip igmp snooping [ip_address | group | management | querier | redundancy | router |
timer]
no debug ip igmp snooping [ip_address | group | management | querier | redundancy | router |
timer]
IPv4 group address
(Optional) Displays IGMP snooping group activity debug messages.
(Optional) Displays IGMP snooping management activity debug messages.
(Optional) Displays IGMP snooping querier debug messages.
(Optional) Displays IGMP snooping redundancy events.
(Optional) Displays IGMP snooping router activity debug messages.
(Optional) Displays IGMP snooping timer event debug messages.
Modification
This command was introduced.
Description
Displays information about the types of debugging that are enabled.
Cisco ME 3800X and ME 3600X Switch Command Reference
debug ip igmp snooping
B-9