Cisco ME 3800X Command Reference Manual page 504

switchport mode
Examples This example shows how to configure a port for access mode:
Switch(config)# interface gigabitethernet0/1
Switch(config-if)# switchport mode access
This example shows how to configure a port for trunk mode:
Switch(config)# interface gigabitethernet0/1
Switch(config-if)# switchport mode trunk
Related Commands Command
show interfaces switchport
switchport access vlan
switchport trunk
Cisco ME 3800X and ME 3600X Switch Command Reference
-70
Description
Displays the administrative and operational status of a switching
(nonrouting) port.
Configures a port as a static-access or dynamic-access port.
Configures the trunk characteristics when an interface is in trunking
mode.
Chapter
OL-28238-01