Cisco ME 3800X Command Reference Manual page 415

Hide thumbs Also See for ME 3800X:

Table of Contents

This example shows output from the show rep topology segment archive command:

Switch# show rep topology segment 1 archive

REP Segment 1

---------------- ---------- ---- ----

sw1_multseg_3750 Gi1/1/1

sw3_multseg_3400 Gi0/13

sw3_multseg_3400 Gi0/14

sw4_multseg_3400 Gi0/13

sw4_multseg_3400 Gi0/14

sw5_multseg_3400 Gi0/13

sw5_multseg_3400 Gi0/14

sw2_multseg_3750 Gi1/1/2

sw2_multseg_3750 Gi1/1/1

sw1_multseg_3750 Gi1/1/2

Related Commands

Enables REP on an interface and assigns a segment ID. This command is also

used to configure a port as an edge port, a primary edge port, or a preferred

Cisco ME 3800X and ME 3600X Switch Command Reference

show rep topology