vlan
•
You can verify your setting by entering the show vlan privileged EXEC command.
Examples
This example shows how to add an Ethernet VLAN with default media characteristics. The default
includes a vlan-name of VLANxxx, where xxxx represents four numeric digits (including leading zeros)
equal to the VLAN ID number. The default media option is ethernet; the state option is active. The
default said-value variable is 100000 plus the VLAN ID; the mtu-size variable is 1500; the stp-type
option is ieee. When you enter the exit VLAN configuration command, the VLAN is added if it did not
already exist; otherwise, this command does has no affect.
This example shows how to create a new VLAN with all default characteristics and enter config-vlan
mode:
Switch(config)# vlan 200
Switch(config-vlan)# exit
Related Commands
Command
show vlan
Cisco ME 3800X and ME 3600X Switch Command Reference
-92
auto for STP running a combination of source-route transparent bridging (IEEE) and
–
source-route bridging (IBM).
tb-vlan1 tb-vlan1-id and tb-vlan2 tb-vlan2-id: specifies the first and second VLAN to which this
VLAN is translationally bridged. Translational VLANs translate FDDI or Token Ring to Ethernet,
for example. The range is 0 to 1005. If no value is specified, 0 (no transitional bridging) is assumed.
Description
Displays the parameters for all configured VLANs or one VLAN (if the
VLAN ID or name is specified).
Chapter
OL-28238-01