Cisco Ios Commands - Cisco ME 3800X Command Reference Manual

Cisco ME 3800X and ME 3600X Switch

Cisco IOS Commands

action
To set the action for the VLAN access map entry, use the action command in access-map configuration
mode. To set the action to the default value, which is to forward, use the no form of this command.
Syntax Description
drop
forward
Defaults The default action is to forward packets.
Command Modes
Access-map configuration
Command History Release
12.2(52)EY
Usage Guidelines You enter access-map configuration mode by using the
If the action is drop, you should define the access map, including configuring any access control list
(ACL) names in match clauses, before applying the map to a VLAN, or all packets could be dropped.
In access-map configuration mode, use the match access-map configuration command to define the
match conditions for a VLAN map. Use the action command to set the action that occurs when a packet
matches the conditions.
The drop and forward parameters are not used in the no form of the command.
You can verify your settings by entering the show vlan access-map privileged EXEC command.
OL-28238-01
action {drop | forward}
no action
Drops the packet when the specified conditions are matched.
Forwards the packet when the specified conditions are matched.
Modification
This command was introduced.
C H A P T E R
vlan access-map
Cisco ME 3800X and ME 3600X Switch Command Reference
2
global configuration command.
2-1