Show Location - Cisco ME 3800X Command Reference Manual

show location

show location
To display location information for a Link Layer Discovery Protocol (LLDP) endpoint, use the show
location command in user EXEC mode.
Syntax Description
admin-tag
civic-location
elin-location
identifier id
interface interface-id
static
| begin
| exclude
| include
expression
Command Modes User EXEC
Command History Release
12.2(52)EY
Usage Guidelines Use the show location command to display location information for an endpoint.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
Cisco ME 3800X and ME 3600X Switch Command Reference
-94
show location admin-tag | [ | {begin | exclude | include} expression]
show location civic-location {identifier id number | interface interface-id | static} | [ | {begin |
exclude | include} expression]
show location elin-location {identifier id number | interface interface-id | static} | [ | {begin |
exclude | include} expression]
Modification
This command was introduced.
Displays administrative tag or site information.
Displays civic location information.
Displays emergency location information (ELIN).
Specifies the ID for the civic location or the elin location. The id range
is 1 to 4095.
Displays location information for the specified interface or all
interfaces. Valid interfaces include physical ports.
Displays static configuration information.
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Chapter
OL-28238-01