Show Controllers Cpu-Interface - Cisco ME 3800X Command Reference Manual

show controllers cpu-interface

show controllers cpu-interface
To display the state of the CPU network interface ASIC and the send and receive statistics for packets
reaching the CPU, use the show controllers cpu-interface command in privileged EXEC mode.
Syntax Description | begin
| exclude
| include
expression
Command Modes Privileged EXEC
Command History Release
12.2(52)EY
Usage Guidelines This display provides information that might be useful for Cisco technical support representatives
troubleshooting the switch.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
are not displayed, but the lines that contain Output are displayed.
Examples This is a partial output example from the show controllers cpu-interface command:
Switch# show controllers cpu-interface
Queue cnt
--------------------------------------------------------------------------------
sw forwarding
routing protocol
icmp
host
acl logging
stp
l2 protocol
mcast control
broadcast
rep
cfm
control?
ip mpls ttl
ipmcast default
route data
ipmcast mismatch
ipmcast rpf-fail
routing throttle
ipmcast?
<output truncated>
Cisco ME 3800X and ME 3600X Switch Command Reference
-36
show controllers cpu-interface [ | {begin | exclude | include} expression]
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
normal
0
0
0
0
0
36
14357
18862
0
0
0
0
0
0
0
0
0
0
0
jumbo normal-err jumbo-err
0 0 0
0 0 0
0 0 0
0 0 0
0 0 0
0 0 0
0 0 0
0 0 0
0 0 0
0 0 0
0 0 0
0 0 0
0 0 0
0 0 0
0 0 0
0 0 0
0 0 0
0 0 0
0 0 0
Chapter
dropped unfill
0 0
0 0
0 0
0 0
0 0
0 0
0 0
0 0
0 0
0 0
0 0
0 0
0 0
0 0
0 0
0 0
0 0
0 0
0 0
OL-28238-01