match ip precedence
You can use match ip precedence classification in input and output policy maps.
You can verify the configuration by entering the show class-map privileged EXEC command.
Examples
This example shows how to create a class map called class, which matches all the incoming traffic with
IP-precedence values of 5, 6, and 7:
Switch(config)# class-map match-any in-class
Switch(config-cmap)# match ip precedence 5 6 7
Switch(config-cmap)# exit
Related Commands
Command
class-map
show class-map
Cisco ME 3800X and ME 3600X Switch Command Reference
2-174
Chapter 2
Description
Creates a class map to be used for matching packets to the class whose name
you specify.
Displays quality of service (QoS) class maps.
Cisco ME 3800X and ME 3600X Switch Cisco IOS Commands
OL-28238-01