Controller Bits Input Applique - Cisco ME 3800X Command Reference Manual

Chapter 2 Cisco ME 3800X and ME 3600X Switch Cisco IOS Commands

controller BITS input applique

To configure the Building Integrated Timing Supply (BITS) clock input link type and characteristics, use
the controller BITS input applique command in global configuration mode. To remove the
configuration, use the no form of this command.
Syntax Description
E1 2048 KHz
E1 framing
linecode (EI)
T1 framing
linecode (T1)
Defaults The default input timing is E1.
Command Modes Global configuration
Command History Release
12.2(52)EY
OL-28238-01
controller BITS input applique E1{2048KHz | framing {fas_crc4 | fas_nocrc | |mfas_crc4 |
mfas_nocre} linecode {ami | hdb3}
controller BITS input applique T1 framing {d4 | esf} linecode {ami | b8zs}
no controller BITS input applique
Specifies an EI timing signal input of 2048 KHz.
Specifies an EI signal input and specify the framing mode as one of these
options:
•
•
•
•
Selects the E1 line coding:
•
•
Specifies a T1 (1.544 MHz) signal input and specify the framing mode as one
of these options:
•
•
Selects the T1 line coding:
•
•
Modification
This command was introduced.
fas_crc4—FASCRC4
fas_nocrc—FAS
mfas_crc4—MFASCRC4
mfas_nocre—MFAS
ami—AMI encoding
hdb3—HDB3 encoding
d4—D4
esf—Extended Superframe
ami—AMI encoding
b8zs—B8ZS encoding
Cisco ME 3800X and ME 3600X Switch Command Reference
controller BITS input applique
2-45