Two-Color Commands (Comparison A794 To A799Ii) - CognitiveTPG A799II Programming Manual

Command Description
1B 4A n Print and feed paper
1B 59 n1 n2 d1...dn Select double-density graphics
1B 5C n1 n2 Set relative print position
1B 61 n Select justification
1D 2A n1 n2 d1...dn] Define downloaded bit image
1D 2F m Print downloaded bit image

Two-color commands (comparison A794 to A799II)

The following table details the list of commands that have been added for two-color ColorPOS
commands that have been altered by the addition of two-color capacity.
ColorPOS two-color and color interpreted commands
®
Hexadecimal
1B 72 m
1D A0 nl nh
1D 23 n
1D 42 n
1D 2A n1 n2 d1 – dm
1D 2F m
1D 81 m n
1D 82 n1– n72/n80
1D 83 n1– n144/n160
1D 84 n m n1 n2 d1 dx
1D 85 m n
1D 86 m
1D 87 m
1D 89 n m
1D 8B n m o
ASCII
ESC r m
1D GS
GS # n
GS B n
GS * n1 n2 d1 – dm
GS / m
GS 0x81 m n
GS 0x82 n1– n72/n80
GS 0x83 n1– n144/n160
GS 0x84 n m n1 n2 d1 dx
GS 0x85 m n
GS 0x86 m
GS 0x87 m
GS 0x89 n m
GS 0x8B n m o
A799-2PG0001B 4/2016
Chapter 3: Programming the Printer
Difference between previous product
and new product emulation mode.
This command uses n in terms of n/360 inches. Since the
A793 had a fundamental step of 1/152 inch and the A799II
has a fundamental step of 1/203 inch, the actual line
spacing will not exactly match the requested spacing.
In A793 emulation mode, the printer scales the graphics to
provide the best match.
The parameter to this command is in units of dots.
However, the command moves and aligns to character
positions. In A793 emulation mode, this command
calculates how many character positions to move based on
the A793 character width in dots (10) versus the A799II (13).
This command does true dot resolution alignment for
centering versus character-aligned centering.
In A793 emulation mode, this command scales the
incoming data to provide a best match to the size of
the image as it printed on A793.
In A793 emulation mode, this command scales the
incoming data to provide a best match to the size of the
image as it printed on A793.
Description
Set current color
Set temporary maximum target speed
Select current logo
Select or cancel white/black reverse print mode
Define downloaded bit image
Print downloaded bit image
Set paper type
Print raster monochrome graphics
Print raster color graphics
Download logo image
Reverse color text mode (two-color)
Monochrome shade mode
Color shade mode
Logo print with color plane swap
Apply shading to logo
25
functionality or existing
®