Communication Interface Settings - CognitiveTPG A799II Programming Manual

Communication interface settings

To change the communication interface settings, enter the configuration menu, select "Set Communication Interface" from
the main menu.
Caution: Be extremely careful changing any of the printer settings to avoid inadvertently changing other settings that
might affect the performance of the printer.
Press the paper feed button as instructed on the configuration menu to select the settings you want to change.
• Baud rate
115200 baud
57600 baud
38400 baud
19200 baud
9600 baud
4800 baud
2400 baud
1200 baud
• Parity
No Parity
Even Parity
Odd Parity
• Flow control method
Software (XON/XOFF)
Hardware (DTR/DSR)
Note: Press the paper feed button for at least one second to validate the selection.
For more information about
Setting the RS-232C Serial interface settings
Chapter 2: Diagnostics and Configuration
• Data reception errors
Ignore errors
Print "?"
• Alternate DTR/DSR
Enabled
Disabled
• USB Driver
Printer Class
Comm Class
• USB NAK
Reject Packets When Error
Accept Packets When Error
• Bluetooth Discoverable
Enabled
Disabled
• Bluetooth Class
iOS
Windows/Android
See this section
"Configuring the printer" on page 16
A799-2PG0001B 4/2016
17