Enable Or Disable Barcode String Terminator; Set Paper Low Threshold Extension; Enable Or Disable Usm Canned Status; Send Diagnostic Pages To Comm Port - CognitiveTPG A799II Programming Manual

Enable or disable barcode string terminator

ASCII
US EXT RS n
Hexadecimal
1F 03 1E n
Decimal 31 03 30 n
Value of n:
0 = Disable
1 = Enable
Default: 0 (Disable)
Enables or disables the barcode string terminator. If disabled, the string terminator will not be looked for when the length
is specified.

Set paper low threshold extension

ASCII US EXT US n
Hexadecimal
1F 03 1F n
Decimal
31 03 31 n
Value of n: 0 = Zero
1 = 5 feet
2 = 10 feet
3 = 15 feet
4 = 20 feet
5 = -5 feet
6 = -10 feet
Default:
0 (Zero)
Sets the amount of footage for the extension in 5 foot increments between 0 and 20 feet.

Enable or disable USM canned status

ASCII US EXT 0x28 n
Hexadecimal 1F 03 28 n
Decimal
31 03 40 n
Value of n: 0 = Disable
1 = Enable
Default:
0 (Disable)
Enables or disables the USM canned status feature.

Send diagnostic pages to comm port

ASCII
US EXT 0x2C n
Hexadecimal 1F 03 2C n
Decimal 31 03 44 n
Value of n:
0 = Disabled
1 = Enabled
Sends the diagnostic pages to the comm port if enabled.
A799-2PG0001B 4/2016
Chapter 4: Programming Commands 145