CognitiveTPG A799II Programming Manual page 101

Byte 1 = printer information
Byte 2 = error information
Byte 3 = paper sensor information
Byte 4 = paper sensor information
First Byte (Printer Information)
Bit Off/On Hex Decimal Status for ASB
0 Off 00 0 Not used. Fixed to off.
1 Off 00 0 Not used. Fixed to off.
2 Off 00 0 One or both cash drawers open.
On 04 4 Both cash drawers closed.
3 Off 00 0 Not busy at the RS232C interface.
On 08 8 Printer is busy at the RS232C interface.
4 On 10 16 Not used. Fixed to on.
5 Off 00 0 Receipt cover closed.
On 20 32 Receipt cover open.
6 Off 00 0 Paper feed button is not pressed.
On 40 64 Paper feed button is pressed.
7 Off 00 0 Not used. Fixed to off.
Second byte (error information)
Bit Off/On Hex Decimal Status for ASB
0 – – – Undefined
1 – – – Undefined
2 Off 00 0 No mechanical error
On 04 4 Mechanical error occurred
3 Off 00 0 No knife error.
On 08 8 Knife error occurred.
4 Off 00 0 Not used. Fixed to off.
5 Off 00 0 No unrecoverable error.
On 20 32 Unrecoverable error occurred.
6 Off 00 0 No recoverable error.
On 40 64 Recoverable error: Cover open, paper out, temperature or voltage error is out of range.
7 Off 00 0 Not used. Fixed to off.
Third byte (paper sensor information)
Bit Off/On Hex Decimal Status for ASB
0 Off 00 0 Receipt paper adequate
On 01 1 Receipt paper low (if paper low sensor enabled)
1 Off 00 0 Receipt paper present
On 02 2 Receipt paper low (if paper low sensor enabled)
2 Off 00 0 Receipt paper present.
On 04 4 Receipt paper exhausted.
A799-2PG0001B 4/2016
Chapter 4: Programming Commands 101