Select The Paper Type Sub-Menu To Set; Select The Firmware Features Sub-Menu To Set - CognitiveTPG A799II Programming Manual

22 Chapter 2: Diagnostics and Configuration

Select the paper type sub-menu to set:

• Paper Type Name
Sets the printer to optimum performance for paper being used. This can also be done through the command 1D
81 m n. See the following chapter for command usage.
Available paper types may vary. Refer to our website, www.CognitiveTPG.com, for an up-to-date list of
qualified paper manufacturers. Currently there are 3 types:
0 = monochrome
4 = two-color (blue/black)
5 = two-color, (red/black or green/black)

Select the firmware features sub-menu to set:

• Paper selection lockout
• Beep after knife cut
• Cash drawer open after knife cut
• Energy-savings timeout value
Allows the user to enable and set the time-out value to 15, 30, 60, 120, or 240 minutes, or to disable the feature.
• Print quality level
Allows the user to set the print quality to speed (350mm/s), balanced (300mm/s), or quality (240mm/s)
A799-2PG0001B 4/2016