CognitiveTPG A799II Programming Manual page 89

On 02 2
2 – – –
3 – – –
4 Off 00 0
5 – – –
6 – – –
7 Off 00 0
n = 4 or 52: Logo Definition
Bit Off/On Hex Decimal
0 Off 00 0
On 01 1
1–7 Off 00 0
Transmits the printer ID specified by n. This command is a batch mode command; that is, the response is transmitted
after all prior data in the receive buffer has been processed. There may be a time lag between the printer receiving this
command and transmitting the response, depending on the receive buffer status.
Knife installed.
Undefined.
Undefined.
Not used. Fixed to Off.
Undefined
Undefined
Not used. Fixed to Off.
Function
No logo downloaded (SRAM or Flash)
Logo downloaded (SRAM or Flash)
Not Used. Fixed to Off.
A799-2PG0001B 4/2016
Chapter 4: Programming Commands 89