Set Datamatrix Module Size - CognitiveTPG A799II Programming Manual

118 Chapter 4: Programming Commands

Set DataMatrix module size

ASCII
GS ( k pL pH cn fn n
Hexadecimal
1D 28 6B 03 00 36 43 n
Decimal 29 40 107 3 0 54 67 n
Value and Ranges:
Value: Ranges:
(pL + pH x 256) 3
cn 54
fn 67
n 2-16
Defaults:
n = 3
This command sets the width of one module of DataMatrix to n dots.
Notes
n = width of a module = height of a module (because the DataMatrix modules are square).
If n is outside its range, this command is ignored.
Settings of this command are in effect until 1b 40 is executed, the printer is reset, or the power is turned off.
Settings of this command affect the encode processing for DataMatrix. Changing the symbol type affects the horizontal
and vertical sizes of the symbol.
A799-2PG0001B 4/2016