Store Datamatrix Data In Symbol Storage Area - CognitiveTPG A799II Programming Manual

Store DataMatrix data in symbol storage area

ASCII
GS ( k pL pH cn fn m d1...dk
Hexadecimal
1D 28 6B pL pH 36 50 30 d1...dk
Decimal 29 40 107 pL pH 54 80 48 d1...dk
Value and Ranges:
Value: Ranges:
(pL + pH x 256) 4-3119
cn 54
fn 80
m 48
d 0-255
k (pL + pH x 256) - 3
This command stores the DataMatrix symbol data (d1...dk) in the symbol storage area. k bytes of d1...dk are processed as
the symbol data.
Notes
The symbol data saved in the symbol storage area by this command is encoded by printing and transmission of this
command. After printing and transmission are executed, the symbol data in the symbol storage area is kept.
FNC1 character must be specified as ESC (Hex = 1BH / Decimal = 27) + "1" (Hex = 31H / Decimal = 49).
ESC itself must be specified as ESC + ESC.
The symbol data saved in the symbol storage area by this command is kept until the following processing is performed:
This function is executed
1b 40 is executed
The printer is reset or the power is turned off
A799-2PG0001B 4/2016
Chapter 4: Programming Commands 119