Set Interpretation Of "Set Current Color" Command; Print Test Form - CognitiveTPG A799 Programming Manual

Revision D 12/09
Font and lines per inch (LPI) setup for different emulations
Emulation LPI
Mode Options
A799 native
6.00, 6.77, 7.52, 8.13 Standard
A794, A793 6.00, 7.52, 8.13
emulation
LEGACY 6.00
emulation
Standard

Set interpretation of "Set current color" command

ASCII US ETX SYN ENQ n
Hexadecimal 1F 03 16 05 n
Decimal
31 03 22 05 n
Value of n: 0-FF (Hex)
n = 01 will cause 1B 72 01 to print red. Any other value for 1B 72 will print black.
n = 00 will cause 1B 72 00 to print red and all other values to print black.
This command defines how to interpret the 1B 72 command for legacy environments. It provides a method to resolve
any differences in the definition of command 1B72 between the A799 native mode and earlier implementations in other
printers.
In A799 native mode, the standard "Set current color" command should be used.
Related information
The 1F 03 16 00 command disables this and all other LogoEZ
To disable one LogoEZ feature when multiple LogoEZ
®
enable only those you desire.

Print test form

ASCII US t
Hexadecimal 1F 74
Decimal
31 116
Prints the current printer configuration settings on the receipt.
Disabled in page mode.
Font(s) Font Default
Options Size LPI
13x24 7.52
Tall 13x27 6.77
ColorPOS 13x27 6.77
®
Standard 13x24 7.52
Tall 13x27 6.00
13x24 6.00 10
features.
®
features are set, first disable all LogoEZ
®
A799-PG00001D
Chapter 4: Programming Commands
Default Comments
EDR
3 Default setup for monochrome paper
3
3 Default setup for two-color paper
3
7 Default setup for LEGACY emulation
features and then re-
®
41