Repair and Replacement Procedures
Assembly Replacement Sequence
Assembly Replacement Sequence
The following steps show the sequence that you should follow to replace an assembly in the
network analyzer.
Step 1. Identify the faulty group. Begin with
Step 2. Order a replacement assembly. Refer to
Step 3. Replace the faulty assembly and determine what adjustments are necessary.
Refer to
"Post-Repair Procedures"
Step 4. Perform the necessary adjustments. Refer to
Step 5. Perform the necessary performance tests. Refer to
Adjustments."
7-4
PNA Series Microwave Network Analyzers
Chapter 4, "Troubleshooting."
Chapter 6, "Replaceable Parts."
in this chapter.
Chapter 3, "Tests and Adjustments."
Chapter 3, "Tests and
N5230A
Service Guide N5230-90014