Contacting Agilent; Shipping Your Analyzer To Agilent For Service Or Repair - Agilent Technologies N5230A Service Manual

PNA Series Microwave Network Analyzers
N5230A

Contacting Agilent

Assistance with test and measurements needs and information on finding a local Agilent
office are available on the Web at:
http://www.agilent.com/find/assist
If you do not have access to the Internet, please contact your Agilent field engineer.
In any correspondence or telephone conversation, refer to the Agilent product
NOTE
by its model number and full serial number. With this information, the
Agilent representative can determine whether your product is still within its
warranty period.

Shipping Your Analyzer to Agilent for Service or Repair

Agilent Technologies reserves the right to reformat or replace the internal
IMPORTANT
hard disk drive in your analyzer as part of its repair. This will erase all user
information stored on the hard disk. It is imperative, therefore, that you
make a backup copy of your critical test data located on the analyzer's hard
disk before shipping it to Agilent for repair.
If you wish to send your network analyzer to Agilent Technologies for service or repair:
• Include a complete description of the service requested or of the failure and a
description of any failed test and any error message.
• Remove and retain the front handles and all rack mount hardware. The analyzer
should be sent to Agilent in the same configuration as it was originally shipped.
• Ship the analyzer using the original or comparable antistatic packaging materials.
• Contact Agilent for instructions on where to ship your analyzer. Refer to
Agilent" on page 2-11.
Service Guide N5230-90014
General Product Information
Agilent Support, Services, and Assistance
"Contacting
2-11