Required Service Test Equipment - Agilent Technologies N5230A Service Manual

PNA Series Microwave Network Analyzers
N5230A

Required Service Test Equipment

Equipment
Frequency counter
Spectrum analyzer
Power meter
Power sensor
Power sensor
Dynamic accuracy
test set
Digital multi-meter
Printer
c
Test software
a. P = Performance tests, A = Adjustments, T = Troubleshooting, V = System verification
b. If an accurate measurement of the dynamic accuracy specification is not required, the E4418A or E4419A can
be used.
c. The recommended model or part number for all equipment listed with a "P" in the Use column is required for
proper operation of this test software.
Microsoft® and Windows® are U.S. registered trademarks of Microsoft Corporation.
Service Guide N5230-90014
Critical Specifications
Test Instruments and Software
Freq: 10 MHz to 10.5 GHz
Accuracy : ±0.5 ppm
Min Freq: 1 MHz
Max Freq: > 4 GHz
Resolution BW: 300 Hz
Accuracy: ±0.0068 dB
Freq: 300 kHz to 3.0 GHz
Range: –30 to +20 dBm
Freq: 3.0 GHz to 20 GHz
Range: –30 to +20 dBm
None specified
Voltage and resistance
measurement capability
Voltage resolution: 10 mV
N/A
N/A
General Product Information
Required Service Test Equipment
Recommended Alternate
Model or Part Model or Part
Number Number
53151A
None
Opt 001
856xE
8565E
E4418B/19B
E4418A/19A
None
8482A
None
E4413A
Z5623A
None
Opt H01
Any Any
Any printer with Microsoft®
Windows® 2000 driver
N7840A None
a
Use
P, A, T
A, T
b
P, A, T
P, A, T
P, A, T
P
T
P
P
2-7