Device Status Icons - Siemens SITRANS LR260 Operating Instructions Manual

Diagnosing and troubleshooting

10.2 Device status icons

10.2 Device status icons
Icon
120
Priority Meaning
Level
1
● Maintenance alarm
● Measurement values are not valid
2
● Maintenance warning: maintenance demanded immediately
● Measured signal still valid
3 ● Maintenance required
● Measured signal still valid
1
● Process value has reached an alarm limit
2
● Process value has reached a warning limit
3
● Process value has reached a tolerance limit
1
● Configuration error
● Device will not work because one or more parameters/components is
incorrectly configured
2
● Configuration warning
● Device can work but one or more parameters/components is incorrectly
configured
3
● Configuration changed
● Device parameterization not consistent with parameterization in project.
Look for info text.
1
● Manual operation (local override)
● Communication is good; device is in manual mode.
2
● Simulation or substitute value
● Communication is good; device is in simulation mode or works with
substitute values.
3
● Out of operation
● Communication is good; device is out of action.
● Data exchanged
● No data exchange
● Write access enabled
● Write access disabled
SITRANS LR260 with mA/HART
Operating Instructions, 11/2019, A5E32337683-AD