Parksense Sensors; Parksense Warning Display; Parksense Display - Jeep CHEROKEE 2016 Owner's Manual

Hide thumbs Also See for CHEROKEE 2016:

Table of Contents

232 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Display (DID) indicating the vehicle speed is too fast. The

system will become active again if the vehicle speed is

decreased to speeds less than approximately 6 mph

ParkSense Sensors

The four ParkSense sensors, located in the rear fascia/

bumper, monitor the area behind the vehicle that is

within the sensors' field of view. The sensors can detect

obstacles from approximately 12 in (30 cm) up to 79 in

(200 cm) from the rear fascia/bumper in the horizontal

direction, depending on the location, type and orienta-

tion of the obstacle.

The ParkSense Warning screen will only be displayed if

Sound and Display is selected from the Customer -

Programmable Features section of the Uconnect System.

Refer to Uconnect Settings" in "Understanding Your

Instrument Panel" for further information.

The ParkSense Warning screen is located within the

EVIC/DID. It provides visual warnings to indicate the

distance between the rear fascia/bumper and the de-

tected obstacle. Refer to "Electronic Vehicle Information

Center (EVIC) or Driver Information Display (DID)" for

further information.

When the vehicle is in REVERSE and an obstacle has

been detected, the warning display will turn ON indicat-

ing the system status.

The system will indicate a detected obstacle by showing

a single arc in one or more regions based on the obstacle's

distance and location relative to the vehicle.

If an obstacle is detected in the center rear region, the

display will show a single solid arc in the center rear

region and will produce a one-half second tone. As the

vehicle moves closer to the obstacle, the display will

Table of Contents