Jeep CHEROKEE 2016 Owner's Manual page 398

396 UNDERSTANDING YOUR INSTRUMENT PANEL
lane departures. The LDW sensitivity can be set to
provide either an "early," "medium," or "late" warning
zone start point.
For further information, refer to "LaneSense Warning
(LDW)" in "Understanding The Features Of Your Ve-
hicle".
• LaneSense Strength — If Equipped
When this feature is selected, it sets the strength of the
steering wheel feedback for potential lane departures.
The amount of directional torque the steering system can
apply to the steering wheel to correct for vehicle lane
departure can be set at "Low," "Medium" or "High."
For further information, refer to "Lane Departure Warn-
ing (LDW)" in "Understanding The Features Of Your
Vehicle".
• ParkSense — If Equipped
The Rear Park Assist system will scan for objects behind
the vehicle when the gear selector is in REVERSE and the
vehicle speed is less than 11 mph (18 km/h). The system
can be enabled with Sound Only, or Sound and Display.
To change the Park Assist status, press and release the
"Sound" or "Sound and Display" button.
Refer to "ParkSense Rear Park Assist" in "Understanding
The Features Of Your Vehicle" for system function and
operating information.
• Front ParkSense Volume — If Equipped
Front Park Assist chime volume settings can be selected
from the EVIC/DID or Uconnect System (if equipped).
The chime volume settings include "Low," "Medium,"
and "High." The factory default volume setting is Me-
dium.