Download Print this page

Jeep 2016 Cherokee Owner's Manual

Jeep 2016 Cherokee Owner's Manual

Hide thumbs Also See for 2016 Cherokee:

Operating information manual (792 pages)

,

Owner's manual (790 pages)

,

User manual (284 pages)

Table of Contents

Advertisement

Quick Links

Download this manual See also: Owner's Manual, User Manual

Cherokee

2 0 1 6

O W N E R ' S M A N U A L

I n f o r ma t i o n P r o v i d e d b y :

Table of Contents

Advertisement

Chapters

Table of Contents

Need help?

Need help?

Do you have a question about the 2016 Cherokee and is the answer not in the manual?

Questions and answers

Summary of Contents for Jeep 2016 Cherokee

Page 1 Cherokee 2 0 1 6 O W N E R ’ S M A N U A L I n f o r ma t i o n P r o v i d e d b y :...
Page 2 This manual illustrates and describes the operation of VEHICLES SOLD IN CANADA With respect to any Vehicles Sold in Canada, the name FCA features and equipment that are either standard or op- US LLC shall be deemed to be deleted and the name FCA tional on this vehicle.
Page 3: Introduction 3
TABLE OF CONTENTS SECTION PAGE INTRODUCTION ............. . . 3 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE .
Page 4 I n f o r ma t i o n P r o v i d e d b y :...
Page 5: Table Of Contents
INTRODUCTION CONTENTS INTRODUCTION ......4 VEHICLE IDENTIFICATION NUMBER ..7 ROLLOVER WARNING ....4 VEHICLE MODIFICATIONS/ALTERATIONS .
Page 6: Introduction
4 INTRODUCTION INTRODUCTION When it comes to service, remember that your authorized dealer knows your Jeep® vehicle best, has factory-trained Congratulations on selecting your new FCA US LLC technicians and genuine MOPAR® parts, and cares about vehicle. Be assured that it represents precision workman- your satisfaction.
Page 7: How To Use This Manual
INTRODUCTION 5 control. Failure to operate this vehicle safely may result seat belts could cut the highway death toll by 10,000 or in a collision, rollover of the vehicle, and severe or fatal more each year and could reduce disabling injuries by injury.
Page 8 6 INTRODUCTION I n f o r ma t i o n P r o v i d e d b y :...
Page 9: Vehicle Identification Number
INTRODUCTION 7 WARNINGS AND CAUTIONS The VIN is also stamped on either right or left hand side of the engine block. This Owner’s Manual contains WARNINGS against oper- ating procedures that could result in a collision or bodily injury. It also contains CAUTIONS against procedures that could result in damage to your vehicle.
Page 10: Vehicle Modifications/Alterations
8 INTRODUCTION VEHICLE MODIFICATIONS/ALTERATIONS WARNING! Any modifications or alterations to this vehicle could seriously affect its roadworthiness and safety and may lead to a collision resulting in serious injury or death. Right Front Body VIN Location NOTE: It is illegal to remove or alter the VIN. I n f o r ma t i o n P r o v i d e d b y :...
Page 11 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE CONTENTS A WORD ABOUT YOUR KEYS ... . .12 VEHICLE SECURITY ALARM — IF EQUIPPED ......19 ▫...
Page 12 10 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE ▫ Using The Panic Alarm ....25 ▫ Remote Start Comfort Systems — If Equipped ......33 ▫...
Page 13 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 11 ▫ Wind Buffeting ..... . .48 ENGINE BREAK-IN RECOMMENDATIONS . . .113 LIFTGATE .
Page 14: A Word About Your Keys
12 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE A WORD ABOUT YOUR KEYS Your vehicle uses either a key start ignition system or keyless ignition system. The key start ignition system consists of a either a Key Fob with Remote Keyless Entry (RKE) transmitter and an Ignition Node Module (IGNM).
Page 15: Keyless Push Button Ignition
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 13 Keyless Push Button Ignition This feature allows the driver to operate the ignition with the push of a button as long as the Remote Keyless Entry (RKE) transmitter is in the passenger compartment. The Keyless Push Button Ignition has four operating positions, three of which are labeled and will illuminate when in position.
Page 16: Key Fob - If Equipped
14 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Key Fob — If Equipped The Key Fob also contains the Remote Keyless Entry (RKE) transmitter and an emergency key, which stores in the rear of the Key Fob. The emergency key allows for entry into the vehicle should the battery in the vehicle or the Key Fob go dead.
Page 17: Ignition Or Accessory On Message
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 15 Ignition Or Accessory On Message When opening the driver’s door when the ignition is in ACC or ON/RUN (engine not running), a chime will sound to remind you to place the ignition in the OFF position.
Page 18 16 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! WARNING! (Continued) Keyless Enter-N-Go in the ACC or ON/RUN mode. • When leaving the vehicle, always remove the Key A child could operate power windows, other con- Fob from the vehicle and lock your vehicle. If trols, or move the vehicle.
Page 19: General Information
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 17 General Information SENTRY KEY The following regulatory statement applies to all radio The Sentry Key Immobilizer system prevents unauthor- frequency (RF) devices equipped in this vehicle: ized vehicle operation by disabling the engine. The system does not need to be armed or activated.
Page 20: Replacement Keys
18 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE it indicates that someone tried to use an invalid Key Fob All of the Key Fobs provided with your new vehicle have to start the engine. Either of these conditions will result in been programmed to the vehicle electronics.
Page 21: Customer Key Programming
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 19 NOTE: Duplication of Key Fobs may be performed at an 2. This device must accept any interference received, authorized dealer. This procedure consists of program- including interference that may cause undesired op- ming a blank Key Fob to the vehicle electronics.
Page 22: Rearming Of The System
20 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • The park lamps and/or turn signals will flash. • For vehicles not equipped with Keyless Enter-N-Go, make sure the vehicle ignition system is OFF, and the • The Vehicle Security Light in the instrument cluster key is physically removed from the ignition.
Page 23: To Disarm The System
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 21 • For vehicles not equipped with Keyless Enter-N-Go, To Disarm The System insert a valid key into the ignition switch and turn The Vehicle Security Alarm can be disarmed using any of the key to the ON position.
Page 24: Security System Manual Override
22 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE system will give you a false alarm. If one of the previ- ILLUMINATED ENTRY ously described arming sequences has occurred, the The courtesy lights will turn on when you use the Vehicle Security Alarm will arm regardless of whether Remote Keyless Entry (RKE) transmitter to unlock the you are in the vehicle or not.
Page 25: Remote Keyless Entry (Rke)
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 23 NOTE: • The front courtesy overhead console and door cour- tesy lights do not turn on if the dimmer control is in the “Dome defeat” position (extreme bottom position). • The Illuminated Entry system will not operate if the dimmer control is in the “Dome defeat”...
Page 26: To Unlock The Doors And Liftgate
24 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE If the vehicle is equipped with Passive Entry, refer to “Keyless Enter-N-Go” in “Things To Know Before Start- ing Your Vehicle” for further information. 1st Press Of Key Fob Unlocks This feature lets you program the system to unlock either the driver’s door or all doors on the first push of the UNLOCK button on the RKE transmitter.
Page 27: To Lock The Doors And Liftgate
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 25 Headlight Illumination On Approach Sound Horn With Lock This feature activates the headlights for up to 90 seconds This feature will cause the horn to chirp when the doors when the doors are unlocked with the RKE transmitter. are locked with the RKE transmitter.
Page 28: Programming Additional Transmitters
26 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: NOTE: • The interior lights will turn off if you place the ignition • Perchlorate Material — special handling may apply. in the ACC or ON/RUN position while the Panic See www.dtsc.ca.gov/hazardouswaste/perchlorate Alarm is activated.
Page 29 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 27 Emergency Key Removal (IGNM) Emergency Key Removal 2. Separating RKE halves requires screw removal (if equipped) and gently prying the two halves of the RKE transmitter apart with the emergency key. Make sure not to damage the seal during removal.
Page 30 28 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Remove Screw From Transmitter Case Separating Ignition Node Module (IGNM) Transmitter Case I n f o r ma t i o n P r o v i d e d b y :...
Page 31: General Information
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 29 touching the new battery with your fingers. Skin oils may cause battery deterioration. If you touch a battery, clean it with rubbing alcohol. 4. To assemble the RKE transmitter case, snap the two halves together.
Page 32: Remote Starting System - If Equipped
30 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: Changes or modifications not expressly approved How To Use Remote Start by the party responsible for compliance could void the All of the following conditions must be met before the user’s authority to operate the equipment. engine will remote start: REMOTE STARTING SYSTEM —...
Page 33: Remote Start Abort Message On Electronic Vehicle Information Center (Evic) Or Driver Information Display (Did) - If Equipped
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 31 • Vehicle alarm system indicator flashing Remote Start Abort Message On Electronic Vehicle Information Center (EVIC) or Driver • Ignition in STOP/OFF position Information Display (DID) — If Equipped • Fuel level meets minimum requirement The following messages will display in the EVIC/DID if the vehicle fails to remote start or exits remote start WARNING!
Page 34: To Enter Remote Start Mode
32 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • The engine can be started two consecutive times with To Enter Remote Start Mode the RKE transmitter. However, the ignition must be Push and release the REMOTE START button on the cycled by pushing the START/STOP button twice (or RKE transmitter twice within five seconds.
Page 35: Remote Start Comfort Systems - If Equipped
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 33 • For vehicles equipped with the Keyless Enter-N-Go doors and disarm the Vehicle Security Alarm (if equipped). Then, prior to the end of the 15-minute cycle, feature, the message “Remote Start Active — Push push and release the START/STOP button.
Page 36: Remote Start Windshield Wiper De-Icer Activation - If Equipped
34 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Remote Start Windshield Wiper De–Icer NOTE: Changes or modifications not expressly approved Activation — If Equipped by the party responsible for compliance could void the user’s authority to operate the equipment. When Remote Start is active and the outside ambient temperature is less than 40°...
Page 37: Power Door Locks
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 35 NOTE: The manual door locks will not lock or unlock WARNING! (Continued) the liftgate. number of reasons. A child or others could be seriously or fatally injured. Children should be WARNING! warned not to touch the parking brake, brake pedal •...
Page 38 36 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE is open, the power locks will not operate. This prevents you from accidentally locking the Key Fob in the vehicle. Placing the ignition to the OFF position or closing the door will allow the locks to operate. If a door is open, and the ignition is in the ACC or ON/RUN position, a chime will sound as a reminder to remove the Key Fob.
Page 39: Child-Protection Door Lock System - Rear Doors
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 37 Automatic Unlock Doors On Exit Child-Protection Door Lock System — Rear Doors The doors will unlock automatically on vehicles with power door locks if: To provide a safer environment for small children riding in the rear seats, the rear doors are equipped with a 1.
Page 40 38 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: • When the child lock system is engaged, the door can be opened only by using the outside door handle even though the inside door lock is in the unlocked position. •...
Page 41: Keyless Enter-N-Go
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 39 • If wearing gloves on your hands, or if it has been WARNING! raining on the Passive Entry door handle, the unlock sensitivity can be affected, resulting in a slower re- Avoid trapping anyone in a vehicle in a collision. sponse time.
Page 42 40 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE To Unlock From The Passenger Side With a valid Passive Entry RKE transmitter within 5 ft (1.5 m) of the passenger door handle, grab the front passenger door handle to unlock all four doors and the liftgate automatically.
Page 43 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 41 FOBIK-Safe only executes in vehicles with passive entry. NOTE: The vehicle will only unlock the doors when a There are three situations that trigger a FOBIK-Safe valid Passive Entry RKE transmitter is detected inside the search in any passive entry vehicle: vehicle, and no valid Passive Entry RKE transmitter is detected outside the vehicle.
Page 44 42 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: If “Unlock All Doors 1st Press” is programmed in EVIC/DID (if equipped), all doors will unlock when you push the electronic release on the liftgate. If Unlock Driver Door 1st Press is programmed in Uconnect, the liftgate will unlock when you push the electronic release on the liftgate.
Page 45 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 43 DO NOT grab the door handle, when pushing the door handle lock button. This could unlock the door(s). DO NOT Grab The Door Handle When Locking Push The Door Handle Button To Lock I n f o r ma t i o n P r o v i d e d b y :...
Page 46: General Information
44 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: General Information • After pushing the door handle button, you must wait The following regulatory statement applies to all radio frequency (RF) devices equipped in this vehicle: two seconds before you can lock or unlock the doors, using either Passive Entry door handle.
Page 47: Windows
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 45 WINDOWS There are single window controls on each passenger door trim panel, which operate the passenger door windows. Power Windows The window controls will operate only when the ignition The window controls on the driver’s door control all the is in the ACC or ON/RUN position.
Page 48 46 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE To stop the window from going all the way down during WARNING! (Continued) the AUTO-Down operation, pull up on the switch briefly. ignition of a vehicle equipped with Keyless Enter- AUTO-Up Feature With Anti-Pinch Protection N-Go in the ACC or ON/RUN mode.
Page 49 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 47 • Any impact due to rough road conditions may trigger 2. Push the window switch down firmly to the second the auto-reverse function unexpectedly during auto- detent to open the window completely and continue closure.
Page 50: Wind Buffeting
48 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE be minimized. If the buffeting occurs with the rear windows open, open the front and rear windows to- gether to minimize the buffeting. If the buffeting occurs with the sunroof open, adjust the sunroof opening to minimize the buffeting or open any window.
Page 51 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 49 NOTE: If “Unlock All Doors 1st Press” is programmed in EVIC/DID if equipped, all doors will unlock when you push the electronic release on the liftgate. If Unlock Driver Door 1st Press is programmed in Uconnect, the liftgate will unlock when you push the electronic release on the liftgate.
Page 52: Power Liftgate - If Equipped
50 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE the steering wheel on the instrument panel, or closed by WARNING! pushing the LIFTGATE button located on left rear trim panel, near the liftgate opening. Push the LIFTGATE Driving with the liftgate open can allow poisonous button located on left rear trim panel once will close the exhaust gases into your vehicle.
Page 53 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 51 NOTE: NOTE: • In the event of a power malfunction to the liftgate, an • The power liftgate buttons will not operate if the emergency liftgate latch release can be used to open vehicle is in gear or the vehicle speed is above 0 mph the liftgate.
Page 54: Occupant Restraint Systems
52 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • The power liftgate must be in the full open position for WARNING! rear liftgate close button on the left rear trim, near the liftgate opening to operate. If the liftgate is not fully •...
Page 55: Important Safety Precautions
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 53 Important Safety Precautions restraints or belt-positioning booster seats. Older chil- dren who do not use child restraints or belt- Please pay close attention to the information in this positioning booster seats should ride properly buckled section.
Page 56: Seat Belt Systems
54 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE side air bags will inflate forcefully into the space Seat Belt Systems between occupants and the door and occupants could Buckle up even though you are an excellent driver, even be injured. on short trips.
Page 57 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 55 their seat belts. The Belt Alert feature is active when- and the driver or outboard front seat passenger is un- ever the ignition switch is in the START or ON/RUN buckled (if equipped with outboard front passenger seat position.
Page 58 56 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE The outboard front passenger seat BeltAlert is not active Lap/Shoulder Belts when the outboard front passenger seat is unoccupied. All seating positions in your vehicle are equipped with BeltAlert may be triggered when an animal or heavy lap/shoulder belts.
Page 59 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 57 WARNING! (Continued) WARNING! (Continued) • In a collision, you and your passengers can suffer suffer internal injuries, or you could even slide out much greater injuries if you are not properly buck- of the seat belt.
Page 60 58 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! (Continued) WARNING! (Continued) seat belt is flat against your body, without twists. If neck injury. A seat belt worn under the arm can you can’t straighten a seat belt in your vehicle, take cause internal injuries.
Page 61 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 59 Lap/Shoulder Belt Operating Instructions 1. Enter the vehicle and close the door. Sit back and adjust the seat. 2. The seat belt latch plate is above the back of the front seat, and next to your arm in the rear seat (for vehicles equipped with a rear seat).
Page 62 60 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Inserting Latch Plate Into Buckle Positioning The Lap Belt 4. Position the lap belt so that it is snug and lies low 5. Position the shoulder belt across the shoulder and across your hips, below your abdomen. To remove chest with minimal, if any slack so that it is comfort- slack in the lap belt portion, pull up on the shoulder able and not resting on your neck.
Page 63 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 61 stowed position. If necessary, slide the latch plate down Adjustable Upper Shoulder Belt Anchorage the webbing to allow the seat belt to retract fully. In the driver and front passenger seats, the top of the shoulder belt can be adjusted upward or downward to Lap/Shoulder Belt Untwisting Procedure position the seat belt away from your neck.
Page 64 62 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE As a guide, if you are shorter than average, you will Seat Belt Extender. The Seat Belt Extender should be used prefer the shoulder belt anchorage in a lower position, only if the existing seat belt is not long enough. When the and if you are taller than average, you will prefer the Seat Belt Extender is not required for a different occu- shoulder belt anchorage in a higher position.
Page 65 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 63 Seat Belts And Pregnant Women Position the lap belt snug and low below the abdomen and across the strong bones of the hips. Place the shoulder belt across the chest and away from the neck. Never place the shoulder belt behind the back or under the arm .
Page 66 64 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE The pretensioners are triggered by the Occupant Re- Restraints” section of this manual. The table below straint Controller (ORC). Like the air bags, the preten- defines the type of feature for each seating position. sioners are single use items.
Page 67 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 65 around the occupant’s mid-section so as to not activate WARNING! the ALR. If the ALR is activated, you will hear a clicking • Never place a rear-facing child restraint in front of sound as the seat belt retracts.
Page 68: Supplemental Restraint System (Srs)
66 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE How To Disengage The Automatic Locking Mode WARNING! (Continued) Unbuckle the combination lap/shoulder belt and allow it only used to install rear-facing or forward-facing to retract completely to disengage the Automatic Locking child restraints that have a harness for restraining Mode and activate the vehicle sensitive (emergency) the child.
Page 69 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 67 • Supplemental Knee Air Bags • Front and Side Impact Sensors • Seat Belt Pretensioners • Seat Belt Buckle Switch • Seat Track Position Sensors • Occupant Classification System Advanced Front Air Bags This vehicle has Advanced Front Air Bags for both the Advanced Front Air Bag And Knee Impact Bolster driver and front passenger as a supplement to the seat...
Page 70 68 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE output appropriate to the severity and type of collision as WARNING! determined by the Occupant Restraint Controller (ORC), • Being too close to the steering wheel or instrument which may receive information from the front impact sensors or other system components.
Page 71 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 69 Advanced Front Air Bag Operation WARNING! Advanced Front Air Bags are designed to provide addi- • No objects should be placed over or near the air tional protection by supplementing the seat belts. Ad- bag on the instrument panel or steering wheel, vanced Front Air Bags are not expected to reduce the risk because any such objects could cause harm if the...
Page 72 70 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Seat belts are necessary for your protection in all colli- Occupant Classification System (OCS) — Front sions, and also are needed to help keep you in position, Passenger Seat away from an inflating air bag. The OCS is part of a Federally regulated safety system for this vehicle.
Page 73 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 71 • The front passenger seat is occupied by a rear-facing weight on the seat will be sensed by the Sensor. The OCM uses input from the Sensor to determine the front pas- child restraint;...
Page 74 72 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE * It is possible for a child to be classified as an adult, The OCS determines the front passenger’s most probable allowing a full-power Passenger Advanced Front Air Bag classification. The OCS estimates the seated weight on deployment.
Page 75 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 73 Do not decrease OR increase the front passenger’s seated weight on the front passenger seat The front passenger’s seated weight must be properly positioned on the front passenger seat. Failure to do so may result in serious injury or death.
Page 76 74 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • Objects are lodged between the front passenger seat Examples of improper front passenger seating include: and center console. • The front passenger’s weight is transferred to another • Accessories that may change the seated weight on the part of the vehicle (like the door, arm rest or instru- ment panel).
Page 77 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 75 Not Seated Properly Not Seated Properly I n f o r ma t i o n P r o v i d e d b y :...
Page 78 76 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Not Seated Properly Not Seated Properly I n f o r ma t i o n P r o v i d e d b y :...
Page 79 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 77 WARNING! WARNING! (Continued) • Placing an object on the floor under the front • If an occupant in the front passenger seat is seated passenger seat may prevent the OCS from working improperly, the occupant may provide an output properly, which may result in serious injury or signal to the OCS that is different from the occu-...
Page 80 78 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • Do not add a secondary seat cover or mat. classify the seated weight of a front seat passenger, the OCS components must function as designed. • At no time should any Supplemental Restraint System Do not make any modifications to the front passenger (SRS) component or SRS related component or fastener seat components, assembly, or to the seat cover.
Page 81 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 79 Knee Impact Bolsters Bag mounted in the instrument panel below the glove compartment. The Supplemental Knee Air Bags provide The Knee Impact Bolsters help protect the knees of the enhanced protection during a frontal impact by working driver and front passenger, and position the front occu- together with the seat belts, pretensioners, and Advanced pants for improved interaction with the Advanced Front...
Page 82 80 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Front Supplemental Seat-Mounted Side Air Bag Label Rear Supplemental Seat-Mounted Side Air Bag Label The SABs may help to reduce the risk of occupant injury during certain side impact and/or vehicle rollover events, in addition to the injury reduction potential provided by the seat belts and body structure.
Page 83 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 81 the seam on the outboard side of the seat cushion’s trim 2. Supplemental Side Air Bag Inflatable Curtains cover (outboard rear seats — if equipped with rear SABs). (SABICs): Located above the side windows. The trim covering the SABICs is labeled “SRS AIRBAG”...
Page 84 82 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE SABICs may help reduce the risk of head or other injuries WARNING! to front and rear seat outboard occupants in certain side • Your vehicle is equipped with left and right impacts and/or vehicle rollover events, in addition to the injury reduction potential provided by the seat belts and Supplemental Side Air Bag Inflatable Curtains body structure.
Page 85 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 83 The SABICs and SABs (“Side Air Bags”) are designed to help keep you in position, away from inflating Side Air activate in certain side impacts and certain rollover Bags. To get the best protection from the Side Air Bags, events.
Page 86 84 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE The Side Air Bags will not deploy in all side collisions, WARNING! (Continued) including some collisions at certain angles, or some side properly. In some collisions, Side Air Bags won’t collisions that do not impact the area of the passenger deploy at all.
Page 87 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 85 faster-developing event may deploy the seat belt preten- deploy and unfold. The abrasions are similar to fric- sioners as well as the Side Air Bags on both sides of the tion rope burns or those you might get sliding along a vehicle.
Page 88 86 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Do not drive your vehicle after the air bags have de- Enhanced Accident Response System ployed. If you are involved in another collision, the air In the event of an impact, if the communication network bags will not be in place to protect you.
Page 89 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 87 Enhanced Accident Response System Reset the OFF position or in the ACC position, the air bag Procedure system is not on and the air bags will not inflate. In order to reset the Enhanced Accident Response System The ORC contains a backup power supply system that functions after an event, the ignition switch must be may deploy the air bags even if the battery loses power or...
Page 90 88 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE While the air bag system is designed to be maintenance WARNING! free, if any of the following occurs, have an authorized dealer service the air bag system immediately. Ignoring the Air Bag Warning Light in your instrument panel could mean you won’t have the air bags to •...
Page 91 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 89 Redundant Air Bag Warning Light Maintaining Your Air Bag System If a fault with the Air Bag Warning Light is WARNING! detected, which could affect the Supplemental Restraint System (“SRS”), the Redundant Air •...
Page 92 90 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE assist in understanding how a vehicle’s systems per- WARNING! (Continued) formed. The EDR is designed to record data related to not function properly if modifications are made. vehicle dynamics and safety systems for a short period of Take your vehicle to an authorized dealer for any time, typically 30 seconds or less.
Page 93: Child Restraints
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 91 NOTE: EDR data are recorded by your vehicle only if a Every state in the United States, and every Canadian non-trivial crash situation occurs; no data are recorded by province, requires that small children ride in proper the EDR under normal driving conditions and no per- restraint systems.
Page 94 92 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE There are different sizes and types of restraints for NOTE: children from newborn size to the child almost large • For additional information, refer to www.seatcheck.org enough for an adult safety belt. Always check the child or call 1–866–732–8243.
Page 95 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 93 Summary Of Recommendations For Restraining Children In Vehicles Child Size, Height, Weight Or Age Recommended Type Of Child Restraint Infants and Toddlers Children who are two years old or Either an Infant Carrier or a Convertible younger and who have not reached the Child Restraint, facing rearward in the height or weight limits of their child...
Page 96 94 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Infants And Child Restraints WARNING! Safety experts recommend that children ride rear-facing • Never place a rear-facing child restraint in front of in the vehicle until they are two years old or until they an air bag.
Page 97 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 95 remain in a forward-facing child seat with a harness for WARNING! (Continued) as long as possible, up to the highest weight or height directions exactly when installing an infant or allowed by the child seat. child restraint.
Page 98 96 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Children Too Large For Booster Seats 5. Can the child stay seated like this for the whole trip? Children who are large enough to wear the shoulder belt If the answer to any of these questions was “no,” then the comfortably, and whose legs are long enough to bend child still needs to use a booster seat in this vehicle.
Page 99 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 97 Recommendations For Attaching Child Restraints Restraint Type Combined Use any attachment method shown with an “X” Below Weight of the LATCH – Seat Belt Only LATCH – Seat Belt + Top Child + Child Lower Anchors Lower Anchors Tether Anchor...
Page 100 98 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Lower Anchors And Tethers For CHildren LATCH-equipped child seats without using the vehicle’s (LATCH) Restraint System seat belts. Some seating positions may have a top tether anchorage but no lower anchorages. In these seating positions, the seat belt must be used with the top tether anchorage to install the child restraint.
Page 101 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 99 LATCH Positions For Installing Child Restraints In This Vehicle • Lower Anchorage Symbol 2 anchorages per seating position • Top Tether Anchorage Symbol I n f o r ma t i o n P r o v i d e d b y :...
Page 102 100 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Frequently Asked Questions About Installing Child Restraints With LATCH What is the weight limit (child’s weight + 65 lbs Use the LATCH anchorage system until the weight of the child restraint) for using the (29.5 kg) combined weight of the child and the child LATCH anchorage system to attach the child...
Page 103 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 101 Frequently Asked Questions About Installing Child Restraints With LATCH Can two child restraints be attached using a Never “share” a LATCH anchorage with two common lower LATCH anchorage? or more child restraints. If the center position does not have dedicated LATCH lower an- chorages, use the seat belt to install a child seat in the center position next to a child seat...
Page 104 102 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Locating LATCH Anchorages The lower anchorages are round bars that are found at the rear of the seat cushion where it meets the seatback. They are just visible when you lean into the rear seat to install the child restraint.
Page 105 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 103 tether strap. The tether strap will have a hook at the end to attach to the top tether anchorage and a way to tighten the strap after it is attached to the anchorage. Center Seat LATCH This vehicle has 5 lower LATCH anchorages in the rear seat.
Page 106 104 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE can use either the LATCH anchors or the vehicle’s seat seating positions using lower anchorages A and B, and belt for installing the third child seat in position (1) D and E. Do not use the center seat anchorage, C. If the behind the front passenger.
Page 107 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 105 WARNING! WARNING! (Continued) the LATCH anchors or the vehicle’s seat belt for • Use anchorages C and D to install a LATCH- installing the child seat in position (1), behind the compatible child restraint in the center seating front passenger.
Page 108 106 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 1. Loosen the adjusters on the lower straps and on the 4. If the child restraint has a tether strap, connect it to the tether strap of the child seat so that you can more top tether anchorage.
Page 109 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 107 How To Stow An Unused ALR Seat Belt: WARNING! When using the LATCH attaching system to install a child • Improper installation of a child restraint to the restraint, stow all ALR seat belts that are not being used by LATCH anchorages can lead to failure of the re- other occupants or being used to secure child restraints.
Page 110 108 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Installing Child Restraints Using The Vehicle Seat Lap/Shoulder Belt Systems For Installing Child Belt Restraints In This Vehicle The seat belts in the passenger seating positions are equipped with a Switchable Automatic Locking Retractor (ALR) that is designed to keep the lap portion of the seat belt tight around the child restraint so that it is not necessary to use a locking clip.
Page 111 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 109 Frequently Asked Questions About Installing Child Restraints With Seat Belts What is the weight limit (child’s Weight limit of the Child Restraint Always use the tether anchor when weight + weight of the child re- using the seat belt to install a for- straint) for using the Tether Anchor ward facing child restraint, up to...
Page 112 110 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Installing A Child Restraint With A Switchable 5. To lock the seat belt, pull down on the shoulder part of Automatic Locking Retractor (ALR) the belt until you have pulled all the seat belt webbing out of the retractor.
Page 113 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 111 strap. See the section “Installing Child Restraints WARNING! (Continued) Using the Top Tether Anchorage” for directions to tether strap of a rear-facing car seat to the tether attach a tether anchor. anchorage that is approved for that seating position, 9.
Page 114 112 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE tether anchorage for that seating position, move the child restraint to another position in the vehicle if one is available. 2. Route the tether strap to provide the most direct path for the strap between the anchor and the child seat. If your vehicle is equipped with adjustable rear head restraints, raise the head restraint, and where possible, route the tether strap under the head restraint and...
Page 115: Transporting Pets
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 113 ENGINE BREAK-IN RECOMMENDATIONS WARNING! A long break-in period is not required for the engine and • An incorrectly anchored tether strap could lead to drivetrain (transmission and axle) in your vehicle. increased head motion and possible injury to the Drive moderately during the first 300 miles (500 km).
Page 116: Safety Tips
114 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE CAUTION! WARNING! • Do not leave children or animals inside parked Never use Non-Detergent Oil or Straight Mineral Oil in the engine or damage may result. vehicles in hot weather. Interior heat build-up may cause serious injury or death.
Page 117: Exhaust Gas
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 115 Exhaust Gas WARNING! (Continued) • If it is necessary to sit in a parked vehicle with the WARNING! engine running, adjust your heating or cooling Exhaust gases can injure or kill. They contain carbon controls to force outside air into the vehicle.
Page 118: Safety Checks You Should Make Inside The Vehicle
116 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Safety Checks You Should Make Inside The have the system inspected at an authorized dealer as Vehicle soon as possible. This light will illuminate with a single chime when a fault with the Air Bag Warning Seat Belts Light has been detected, it will stay on until the fault Inspect the seat belt system periodically, checking for...
Page 119 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 117 cannot slip out of position and interfere with the pedals WARNING! (Continued) or impair safe operation of your vehicle in other ways. • Check mounting of mats on a regular basis. Always properly reinstall and secure floor mats that have WARNING! been removed for cleaning.
Page 120: Periodic Safety Checks You Should Make Outside The Vehicle
118 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Periodic Safety Checks You Should Make Outside Door Latches The Vehicle Check for proper closing, latching, and locking. Tires Fluid Leaks Examine tires for excessive tread wear and uneven wear Check area under vehicle after overnight parking for fuel, patterns.
Page 121 UNDERSTANDING THE FEATURES OF YOUR VEHICLE CONTENTS MIRRORS ......126 BLIND SPOT MONITORING (BSM) — IF EQUIPPED .
Page 122 120 UNDERSTANDING THE FEATURES OF YOUR VEHICLE ▫ Head Restraints ..... .153 ▫ Headlights On With Wipers (Available With Automatic Headlights Only) ... . .166 ▫...
Page 123 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 121 ▫ Flash-To-Pass ......171 HEATED STEERING WHEEL — IF EQUIPPED ......181 ▫...
Page 124 122 UNDERSTANDING THE FEATURES OF YOUR VEHICLE ▫ To Activate/Deactivate....191 ▫ Normal (Fixed Speed) Electronic Speed Control Mode ......210 ▫...
Page 125 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 123 ▫ Changing LaneSense Status ....229 ▫ ParkSense Warning Display ....241 ▫...
Page 126 124 UNDERSTANDING THE FEATURES OF YOUR VEHICLE ▫ Opening Sunroof — Manual Mode ..293 PARKVIEW REAR BACK UP CAMERA — IF EQUIPPED ......280 ▫...
Page 127 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 125 POWER INVERTER — IF EQUIPPED ..300 CARGO AREA FEATURES ....309 ▫ Cargo Load Floor .....309 WIRELESS CHARGING PAD —...
Page 128: Mirrors
126 UNDERSTANDING THE FEATURES OF YOUR VEHICLE MIRRORS Inside Day/Night Mirror — If Equipped The mirror head can be adjusted up, down, left, and right for various drivers. The mirror should be adjusted to center on the view through the rear window. Headlight glare from vehicles behind you can be reduced by moving the small control under the mirror to the night position (toward the rear of the vehicle).
Page 129 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 127 left, and right for various drivers. The mirror should be adjusted to center on the view through the rear window. NOTE: The Automatic Dimming Mirror feature is dis- abled when the vehicle is in reverse gear to improve rear view viewing.
Page 130 128 UNDERSTANDING THE FEATURES OF YOUR VEHICLE ASSIST Call WARNING! The ASSIST Button is used to automatically connect you ALWAYS obey traffic laws and pay attention to the to any one of the following support centers: road. Some Uconnect Access services, including 9-1-1 •...
Page 131 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 129 NOTE: In case the 9-1-1 Call button is pushed in error, 4. You should be able to speak with the 9-1-1 operator there will be a 10 second delay before the 9-1-1 Call through the vehicle audio system to determine if system initiates a call to a 9-1-1 operator.
Page 132 130 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: WARNING! • Your vehicle may be transmitting data as authorized • If anyone in the vehicle could be in danger (e.g., by the subscriber. fire or smoke is visible, dangerous road conditions •...
Page 133 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 131 9-1-1 Call System Limitations WARNING! (Continued) Vehicles sold in Canada and Mexico DO NOT have 9-1-1 electrical equipment to the vehicle’s electrical sys- Call system capabilities. tem. This may prevent your vehicle from sending a signal to initiate an emergency call.
Page 134 132 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • The ignition key is in OFF position. WARNING! • The vehicle’s electrical systems are not intact. • Ignoring the Rearview Mirror light could mean you • The 9-1-1 Call system software and/or hardware are will not have 9-1-1 Call services.
Page 135: Outside Mirrors
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 133 General Information WARNING! This device complies with Part 15 of the FCC Rules. ALWAYS obey traffic laws and pay attention to the Operation is subject to the following two conditions: road. Some Uconnect Access services, including 9-1-1 (1) This device may not cause harmful interference, and Assist, will NOT work without an operable 1X and (2) this device must accept any interference re-...
Page 136: Power Mirrors
134 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: The passenger side convex outside mirror will give a much wider view to the rear, and especially of the lane next to your vehicle. WARNING! Vehicles and other objects seen in the passenger side convex mirror will look smaller and farther away than they really are.
Page 137: Power Folding Mirrors - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 135 to move the mirror in the direction the arrow is pointing. Push the switch once and the mirrors will fold in, The selection will time out after 30 seconds of inactivity pushing the switch a second time will return the mirrors to guard against accidentally moving a mirror position to the normal driving position.
Page 138: Heated Mirrors - If Equipped
136 UNDERSTANDING THE FEATURES OF YOUR VEHICLE If the mirrors are in the folded position, and vehicle Heated Mirrors — If Equipped speed is equal or greater than 10 mph (16 km/h), they These mirrors are heated to melt frost or ice. This will automatically unfold.
Page 139: Sun Visor "Slide-On-Rod" Feature - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 137 1. Fold down the sun visor. 2. Unclip the visor from the center clip. 3. Pull the sun visor toward the inside rearview mirror to extend it. BLIND SPOT MONITORING (BSM) — IF EQUIPPED The Blind Spot Monitoring (BSM) system uses two radar- based sensors, located inside the rear bumper fascia, to...
Page 140 138 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The BSM detection zone covers approximately one lane width on both sides of the vehicle 12 ft (3.8 m). The zone length starts at the outside mirror and extends approxi- mately 10 ft (3 m) beyond the rear bumper of the vehicle. The BSM system monitors the detection zones on both sides of the vehicle when the vehicle speed reaches approximately 6 mph (10 km/h) or higher and will alert...
Page 141 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 139 beyond the side of your vehicle, this may result in the BSM warning light remaining illuminated the entire time the vehicle is in a forward gear. The area on the rear fascia where the radar sensors are located must remain free of snow, ice, and dirt/road contamination so that the BSM system can function properly.
Page 142 140 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Entering From The Side Entering From The Rear Vehicles that move into your adjacent lanes from either Vehicles that come up from behind your vehicle on either side of the vehicle. side and enter the rear detection zone with a relative speed of less than 30 mph (48 km/h).
Page 143 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 141 Overtaking Traffic If you pass another vehicle slowly with a relative speed less than 10 mph (16 km/h) and the vehicle remains in the blind spot for approximately 1.5 seconds, the warning light will be illuminated. If the difference in speed between the two vehicles is greater than 10 mph (16 km/h), the warning light will not illuminate.
Page 144 142 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Overtaking/Passing Stationary Objects The BSM system is designed not to issue an alert on The BSM system will not alert you of objects that are stationary objects such as guardrails, posts, walls, foliage, traveling in the opposite direction of the vehicle in berms, etc.
Page 145: Rear Cross Path (Rcp)
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 143 WARNING! (Continued) system is not designed to detect pedestrians, bicy- clists, or animals. Even if your vehicle is equipped with the BSM system, always check your vehicles mirrors, glance over your shoulder, and use your turn signal before changing lanes.
Page 146 144 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: In a parking lot situation, oncoming vehicles can be obscured by vehicles parked on either side. If the sensors are blocked by other structures or vehicles, the system will not be able to alert the driver. When RCP is on and the vehicle is in REVERSE, the driver is alerted using both the visual and audible alarms, including reducing the radio volume.
Page 147: Modes Of Operation
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 145 Modes Of Operation turn signal is then activated, and it corresponds to an alert present on that side of the vehicle, an audible chime Three selectable modes of operation are available in the will also be sounded.
Page 148: General Information
146 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: The BSM system will store the current operating SEATS mode when the vehicle is shut off. Each time the vehicle Seats are a part of the Occupant Restraint System of the is started the previously stored mode will be recalled and vehicle.
Page 149: Power Seats - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 147 Power Seats — If Equipped Reclining The Seatback Forward Or Rearward Some models may be equipped with a power driver’s The seatback can be reclined both forward and rearward. seat. The power seat switch is located on the outboard Push the seat recliner switch forward or rearward.
Page 150: Manual Seats - If Equipped
148 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! Do not ride with the seatback reclined so that the shoulder belt is no longer resting against your chest. In a collision you could slide under the seat belt, which could result in serious injury or death. Power Lumbar —...
Page 151 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 149 WARNING! • Adjusting a seat while driving may be dangerous. Moving a seat while driving could result in loss of control which could cause a collision and serious injury or death. • Seats should be adjusted before fastening the seat belts and while the vehicle is parked.
Page 152 150 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Manual Seat Height Adjustment — If Equipped The driver’s seat height can be raised or lowered by using a lever, located on the outboard side of the seat. Pull upward on the lever to raise the seat height or push downward on the lever to lower the seat height.
Page 153: Front Heated Seats - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 151 Front Heated Seats — If Equipped NOTE: The engine must be running for the heated seats to operate. The front heated seats control buttons are located within the Uconnect system. You can gain access to the control Vehicles Equipped With Remote Start buttons through the climate screen or the controls screen.
Page 154: Front Ventilated Seats - If Equipped
152 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The front ventilated seats control buttons are located WARNING! (Continued) within the Uconnect system. You can gain access to the even at low temperatures, especially if used for control buttons through the climate screen or the controls long periods of time.
Page 155: Head Restraints
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 153 This feature can be programmed through the Uconnect NOTE: Do not reverse the head restraints (making the system. Refer to “Uconnect Settings” in “Understanding rear of the head restraint face forward) in an attempt to Your Instrument Panel”...
Page 156 154 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: To remove the head restraint, raise it as far as it can go then push the release button and the adjustment button at the base of each post while pulling the head restraint up.
Page 157 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 155 Rear Head Restraints WARNING! The rear outboard head restraints have three positions • A loose head restraint thrown forward in a colli- Up, Mid and Down. The center head restraint has only sion or hard stop could cause serious injury or two positions, Up and Down.
Page 158 156 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Outboard Head Restraint Center Head Restraint 1 — Release Button 1 — Adjustment Button 2 — Adjustment Button 2 — Release Button I n f o r ma t i o n P r o v i d e d b y :...
Page 159: 60/40 Split Folding Rear Seat With Fold-Flat Feature
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 157 WARNING! WARNING! • It is extremely dangerous to ride in a cargo area, ALL the head restraints MUST be reinstalled in the vehicle to properly protect the occupants. Follow the inside or outside of a vehicle. In a collision, people re-installation instructions above prior to operating riding in these areas are more likely to be seriously the vehicle or occupying a seat.
Page 160 158 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Rear Seat Adjustment Bar Rear Seatback Release Lever And Pull Strap To Lower The Rear Seat 2. Fold the rear seatback completely forward. 1. Lift the seatback release lever located on the upper outer edge of the seat or pull the pull strap located on the middle outer edge of the seat.
Page 161 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 159 To Raise The Rear Seat NOTE: If interference from the cargo area prevents the seatback from fully locking, you will have difficulty returning the seat to its proper position. Raise the seatback and lock it into place. WARNING! Be certain that the seatback is securely locked into position.
Page 162: Driver Memory Seat - If Equipped
160 UNDERSTANDING THE FEATURES OF YOUR VEHICLE DRIVER MEMORY SEAT — IF EQUIPPED This feature allows the driver to store up to two different memory profiles, for easy recall through a memory switch. Each memory profile contains desired position settings for the driver seat and side mirrors and a set of desired radio station presets.
Page 163: Linking And Unlinking The Remote Keyless Entry Transmitter To Memory
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 161 2. Adjust all memory profile settings to desired prefer- NOTE: ences (i.e., seat, side mirror and radio station presets). • Memory profiles can be set without the vehicle in 3. Push and release the SET button on the memory PARK, but the vehicle must be in PARK to recall a switch, then push the number (1) button within five memory profile.
Page 164: Memory Position Recall
162 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: Before programming your RKE transmitters you 4. Push and release the LOCK button on the RKE trans- must select the “Memory To FOB” feature through the mitter within 10 seconds. Uconnect system screen. Refer to “Uconnect Settings” in NOTE: Your RKE transmitters can be unlinked to your “Understanding Your Instrument Panel”...
Page 165: Easy Entry/Exit Seat
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 163 A recall can be cancelled by pushing any of the MEMORY The seat will return to its previously set position when buttons (S, 1, or 2) during a recall. When a recall is you cycle the vehicle’s ignition to the ACC or RUN cancelled, the driver seat will stop moving.
Page 166: To Open And Close The Hood
164 UNDERSTANDING THE FEATURES OF YOUR VEHICLE TO OPEN AND CLOSE THE HOOD 2. Move to the outside of the vehicle and pull the safety latch release lever forward (toward you). The safety Two latches must be released to open the hood. latch release lever is located behind the front edge of 1.
Page 167: Lights
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 165 LIGHTS CAUTION! Headlight Switch To prevent possible damage, do not slam the hood to The headlight switch is located on the left side of close it. Lower the hood until it is open approxi- the instrument panel.
Page 168: Automatic Headlights - If Equipped
166 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Automatic Headlights — If Equipped This system automatically turns the headlights on or off according to ambient light levels. To turn the system on, rotate the headlight switch clockwise to the last detent for automatic headlight operation.
Page 169: Headlight Time Delay
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 167 is set to ON. In addition, the headlights will turn off If you turn the headlights or parking lights on, or place when the wipers are turned off if they were turned on by the ignition in ACC or RUN, the system will cancel the this feature.
Page 170: Automatic High Beam Headlamp Control - If Equipped
168 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Automatic High Beam Headlamp Control — If and other obstructions on the windshield or camera Equipped lens will cause the system to function improperly. • To opt out of the Advanced Auto High-Beam Sensitiv- The Automatic High Beam Headlamp Control system provides increased forward lighting at night by automat- ity Control (default) and enter Reduced High-Beam...
Page 171: Lights-On Reminder
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 169 NOTE: If allowed by law in the country in which the vehicle was purchased the Daytime Running Lights can be turned on and off using the Uconnect System, refer to “Uconnect Settings” in “Understanding Your Instrument Panel”...
Page 172: Multifunction Lever
170 UNDERSTANDING THE FEATURES OF YOUR VEHICLE An indicator light in the instrument cluster illuminates when the fog lights are turned on. NOTE: The fog lights will operate with the low beam headlights or parking lights on. However, selecting the high beam headlights will turn off the fog lights.
Page 173: Lane Change Assist
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 171 NOTE: Lane Change Assist • If either light remains on and does not flash, or there is Tap the lever up or down once, without moving beyond the detent, and the turn signal (right or left) will flash a very fast flash rate, check for a defective outside light three times then automatically turn off.
Page 174: Interior Lights
172 UNDERSTANDING THE FEATURES OF YOUR VEHICLE switch on either side of the console. To turn the lights off, There are courtesy lights located above the front seats. push the switch a second time. These lights also turn on The courtesy lights can be turned on by pushing the lens. when a door is opened, or when the UNLOCK button on To turn the lights off, push the lens a second time.
Page 175 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 173 With the parking lights or headlights on, rotating the Ambient Light Control — If Equipped instrument panel dimmer control upward will increase Rotate the ambient dimmer control upward or down- the brightness of the instrument panel lights and lighted ward to increase or decrease the brightness of the ambi- cupholders —...
Page 176: Battery Saver Feature
174 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Dome Light Position Battery Saver Feature Rotate the instrument panel dimmer control completely To protect the battery, the interior lights will turn off upward to the second detent to turn on the interior lights. automatically 10 minutes after the ignition switch is The interior lights will remain on when the instrument moved to the LOCK position.
Page 177: Windshield Wiper Operation
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 175 Windshield Wiper/Washer Lever Windshield Wiper Operation Windshield Wiper Operation CAUTION! Rotate the end of the lever to one of the first four detent Always remove any buildup of snow that prevents positions for intermittent settings, the fifth detent for low the windshield wiper blades from returning to the wiper operation and the sixth detent for high wiper “park”...
Page 178: Intermittent Wiper System
176 UNDERSTANDING THE FEATURES OF YOUR VEHICLE CAUTION! (Continued) turned off, and the blades cannot return to the “park” position, damage to the wiper motor may occur. Intermittent Wiper System Use one of the four intermittent wiper settings when weather conditions make a single wiping cycle, with a variable delay between cycles, desirable.
Page 179: Mist
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 177 while in the intermittent setting, the wipers will turn on If the lever is pulled while the wipers are in the off and operate for several wipe cycles after the lever is position, the wipers will operate for several wipe cycles, released, and then resume the intermittent interval pre- then turn off.
Page 180: Windshield Wiper De-Icer - If Equipped
178 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: The mist feature does not activate the washer Windshield Wiper De-Icer — If Equipped pump; therefore, no washer fluid will be sprayed on the Your vehicle may be equipped with a Windshield Wiper windshield.
Page 181: Rain Sensing Wipers - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 179 • Activation By Remote Start Operation — When re- desires less wiper sensitivity. Setting four can be used if mote start is active and the outside ambient tempera- the driver desires more sensitivity. Place the wiper switch ture is less than 33°...
Page 182: Tilt/Telescoping Steering Column
180 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The Rain Sensing system has protection features for the Remote Start Mode Inhibit — On vehicles equipped wiper blades and arms, and will not operate under the with Remote Starting system, Rain Sensing wipers are following conditions: not operational when the vehicle is in the remote start mode.
Page 183: Heated Steering Wheel - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 181 To lock the steering column in position, push the control handle upward until fully engaged. WARNING! Do not adjust the steering column while driving. Adjusting the steering column while driving or driv- ing with the steering column unlocked, could cause the driver to lose control of the vehicle.
Page 184 182 UNDERSTANDING THE FEATURES OF YOUR VEHICLE steering wheel can shut off early or may not turn on to “Uconnect Settings” in “Understanding Your Instru- when the steering wheel is already warm. ment Panel” for further information. The heated steering wheel control button is located WARNING! within the Uconnect system.
Page 185: Electronic Speed Control - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 183 ELECTRONIC SPEED CONTROL — IF EQUIPPED When engaged, the Electronic Speed Control takes over accelerator operations at speeds greater than 25 mph (40 km/h). The Electronic Speed Control buttons are located on the right side of the steering wheel.
Page 186: To Activate
184 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: In order to ensure proper operation, the Elec- WARNING! tronic Speed Control System has been designed to shut down if multiple Speed Control functions are operated at Leaving the Electronic Speed Control system on the same time.
Page 187: To Deactivate
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 185 To Deactivate The drivers preferred units can be selected through the instrument panel settings if equipped. Refer to “Under- A soft tap on the brake pedal, pushing the CANCEL standing Your Instrument Panel” for more information. button, or normal brake pressure while slowing the The speed increment shown is dependant on the chosen vehicle will deactivate the Electronic Speed Control with-...
Page 188: To Accelerate For Passing
186 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • If the button is continually pushed, the set speed will • If the button is continually pushed, the set speed will continue to increase until the button is released, then continue to decrease until the button is released, then the new set speed will be established.
Page 189: Adaptive Cruise Control (Acc) - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 187 NOTE: The Electronic Speed Control system maintains ADAPTIVE CRUISE CONTROL (ACC) — IF speed up and down hills. A slight speed change on EQUIPPED moderate hills is normal. Adaptive Cruise Control (ACC) increases the driving convenience provided by cruise control while traveling On steep hills, a greater speed loss or gain may occur so on highways and major roadways.
Page 190 188 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • If the ACC sensor detects a vehicle ahead, ACC will You can change the mode by using the Cruise Control apply limited braking or acceleration (not to exceed buttons. The two control modes function differently. the original set speed) automatically to maintain a Always confirm which mode is selected.
Page 191: Adaptive Cruise Control (Acc) Operation
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 189 WARNING! (Continued) WARNING! (Continued) • The ACC system: You should switch off the ACC system: • Does not react to pedestrians, oncoming vehicles, • When driving in fog, heavy rain, heavy snow, sleet, and stationary objects (e.g., a stopped vehicle in a heavy traffic, and complex driving situations (i.e., traffic jam or a disabled vehicle).
Page 192: Activating Adaptive Cruise Control (Acc)
190 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: Any chassis/suspension or tire size modifications to the vehicle will effect the performance of the Adaptive Cruise Control and Forward Collision Warning System. Activating Adaptive Cruise Control (ACC) You can only engage ACC if the vehicle speed is above 0 mph (0 km/h).
Page 193: To Activate/Deactivate
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 191 • When you apply the brakes. • When the parking brake is set. • When the automatic transmission is in PARK, RE- VERSE or NEUTRAL. • When the Vehicle speed is outside of the speed range. •...
Page 194: To Set A Desired Acc Speed
192 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! (Continued) You could lose control and have a collision. Always leave the system off when you are not using it. To Set A Desired ACC Speed When the vehicle reaches the speed desired, push the SET + button or the SET - button and release.
Page 195: To Cancel
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 193 • The shift lever/gear selector is removed from the Remove your foot from the accelerator pedal. If you do not, the vehicle may continue to accelerate beyond the set Drive position. speed. If this occurs: •...
Page 196: To Resume
194 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • The Normal (Fixed Speed) Electronic Speed Control WARNING! ON/OFF button is pushed. The Resume function should only be used if traffic • The ignition is turned OFF. and road conditions permit. Resuming a set speed •...
Page 197 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 195 • If the button is continually pushed, the set speed will The speed increment shown is dependant on the chosen speed unit of U.S. (mph) or Metric (km/h): continue to increase in 10 km/h increments until the button is released.
Page 198 196 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • If the button is continually pushed, the set speed will • When you use the SET - button to decelerate, if the continue to decrease in 5 mph decrements until the engine’s braking power does not slow the vehicle button is released.
Page 199: Setting The Following Distance In Acc
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 197 Setting The Following Distance In ACC The specified following distance for ACC can be set by varying the distance setting between four bars (longest), three bars (long), two bars (medium) and one bar (short). Using this distance setting and the vehicle speed, ACC calculates and sets the distance to the vehicle ahead.
Page 200 198 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Distance Setting 3 Bars (Long) Distance Setting 2 Bars (Medium) I n f o r ma t i o n P r o v i d e d b y :...
Page 201 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 199 To decrease the distance setting, push the Distance Set- ting — Decrease button and release. Each time the button is pushed, the distance setting decreases by one bar (shorter). If there is no vehicle ahead, the vehicle will maintain the set speed.
Page 202 200 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • The system disengages. (Refer to the information on ACC Activation). The maximum braking applied by ACC is limited; how- ever, the driver can always apply the brakes manually, if necessary. NOTE: The brake lights will illuminate whenever the ACC system applies the brakes.
Page 203: Overtake Aid
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 201 Overtake Aid NOTE: After the ACC system holds your vehicle at a standstill for approximately 3 consecutive minutes, the When driving with ACC engaged and following a ve- parking brake will be activated, and the ACC system will hicle, the system will provide an additional acceleration be cancelled.
Page 204: Adaptive Cruise Control (Acc) Menu
202 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Adaptive Cruise Control (ACC) Menu Push the SET + or the SET- button (located on the steering wheel) and the following will display in the EVIC/DID: The EVIC/DID displays the current ACC system set- tings.
Page 205: Display Warnings And Maintenance
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 203 Display Warnings And Maintenance vehicle has left these areas. Under rare conditions, when the radar is not tracking any vehicles or objects in its path “Wipe Front Radar Sensor In Front Of Vehicle” this warning may temporarily occur.
Page 206 204 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • Do not remove any screws from the sensor. Doing so NOTE: could cause an ACC system malfunction or failure and • If the “ACC/FCW Unavailable Wipe Front Radar require a sensor realignment. Sensor”...
Page 207 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 205 obstructions, such as mud, dirt, or ice on windshield and When the condition that created limited functionality fog on the inside of glass. In these cases, the EVIC/DID is no longer present, the system will return to full will display “ACC/FCW Limited Functionality Clean functionality.
Page 208: Precautions While Driving With Acc
206 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Precautions While Driving With ACC In certain driving situations, ACC may have detection issues. In these cases, ACC may brake late or unexpect- edly. The driver needs to stay alert and may need to intervene.
Page 209 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 207 the vehicle is out of the curve the system will resume Using ACC On Hills your original Set Speed. This is a part of normal ACC When driving on hills, ACC may not detect a vehicle in system functionality.
Page 210 208 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Lane Changing ACC may not detect a vehicle until it is completely in the lane in which you are traveling. In the illustration shown, ACC has not yet detected the vehicle changing lanes and it may not detect the vehicle until it’s too late for the ACC system to take action.
Page 211 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 209 Narrow Vehicles Stationary Objects And Vehicles Some narrow vehicles traveling near the outer edges of ACC does not react to stationary objects and stationary the lane or edging into the lane are not detected until they vehicles.
Page 212: General Information
210 UNDERSTANDING THE FEATURES OF YOUR VEHICLE General Information Normal (Fixed Speed) Electronic Speed Control Mode This vehicle has systems that operate on radio frequency that comply with Part 15 of the Federal Communications In addition to Adaptive Cruise Control mode, a Normal Commission (FCC) rules and with Industry Canada (Fixed Speed) Electronic Speed Control mode is available Standards RSS- GEN/210/220/310.
Page 213 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 211 Once a speed has been set a message (CRUISE CON- WARNING! TROL SET TO MPH/KM) will appear indicating what speed was set. This light will turn on when the electronic In the normal Cruise Control mode, the system will speed control is SET.
Page 214 212 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • If the button is continually pushed, the set speed will The drivers preferred units can be selected through the continue to increase in 5 mph increments until the instrument panel settings if equipped. Refer to “Under- button is released.
Page 215 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 213 • If the button is continually pushed, the set speed will • The shift lever/gear selector is removed from the continue to decrease in 10 km/h decrements until the Drive position. button is released. The decrease in set speed is re- To Resume Speed flected in the EVIC/DID display.
Page 216: Forward Collision Warning (Fcw) With Mitigation - If Equipped
214 UNDERSTANDING THE FEATURES OF YOUR VEHICLE FORWARD COLLISION WARNING (FCW) WITH If the driver does not take action based upon these MITIGATION — IF EQUIPPED progressive warnings, then the system will provide a limited level of active braking to help slow the vehicle Forward Collision Warning (FCW) With Mitigation and mitigate the potential forward collision.
Page 217 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 215 NOTE: • The minimum speed for FCW activation is 1 mph (2 km/h). • The FCW alerts may be triggered on objects other than vehicles such as guard rails or sign posts based on the course prediction.
Page 218: Turning Fcw On Or Off
216 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! Forward Collision Warning (FCW) is not intended to avoid a collision on its own, nor can FCW detect every type of potential collision. The driver has the responsibility to avoid a collision by controlling the vehicle via braking and steering.
Page 219: Changing Fcw And Active Braking Status
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 217 • Changing the FCW status to “Off” prevents the system Changing FCW And Active Braking Status from warning you of a possible collision with the The FCW Sensitivity And Active Braking Settings are vehicle in front of you.
Page 220: Fcw Limited Warning
218 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: limited the system performance is no longer present, the system will return to its full performance state. If the • The system will retain the last setting selected by the problem persists, see your authorized dealer. driver after ignition shut down.
Page 221: Turning Lanesense On Or Off
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 219 LaneSense system uses a forward looking camera to visual warning through the EVIC/DID to prompt the detect lane markings and measure vehicle position driver to remain within the lane. When only a single lane within the lane boundaries.
Page 222 220 UNDERSTANDING THE FEATURES OF YOUR VEHICLE LaneSense Warning Button Lane Sense On Message To turn the LaneSense system ON, push the LaneSense To turn the LaneSense system OFF, push the LaneSense button to turn the system ON (LED turns off). A “Lane button once to turn the system OFF (LED turns on).
Page 223: Lanesense Warning Message
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 221 LaneSense Warning Message The LaneSense system will indicate the current lane drift condition through the Electronic Vehicle Information Center (EVIC) or Driver Information Display (DID). 3.5 EVIC Screen — If Equipped When the LaneSense system is ON; the lane lines are gray when both of the lane boundaries have not been detected and the LaneSense indicator is solid white.
Page 224 222 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • When the LaneSense system senses the lane has been NOTE: The LaneSense system operates with the similar approached and is in a lane departure situation, the behavior for a right lane departure when only the right left thick lane line flashes from white to gray, the left lane marking has been detected.
Page 225 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 223 • For example: If approaching the left side of the lane the steering wheel will turn to the right. Lanes Sensed (White Lines/Green Indicator) • When the LaneSense system senses a lane drift situa- tion, the left thick lane line and the left thin line turn Lane Sensed (Solid White Thick Line, Solid White Thin Line/Solid Yellow Indicator)
Page 226 224 UNDERSTANDING THE FEATURES OF YOUR VEHICLE thin line remains solid white and the LaneSense indi- cator changes from solid yellow to flashing yellow. At this time torque is applied to the steering wheel in the opposite direction of the lane boundary. •...
Page 227 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 225 7.0 DID Screen — If Equipped Left Lane Departure — Only Left Lane Detected • When the LaneSense system is ON, the LaneSense When the LaneSense system is ON; the lane lines are gray when both of the lane boundaries have not been detected indicator is solid white when only the left lane mark- and the LaneSense indicator is solid white.
Page 228 226 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Left Lane Departure — Both Lanes Detected • When the LaneSense system is ON, the lane lines turn from gray to white to indicate that both of the lane markings have been detected. The LaneSense indicator is solid green when both lane markings have been detected and the system is “armed”...
Page 229 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 227 • For example: If approaching the left side of the lane the steering wheel will turn to the right. Lanes Sensed (White Lines/Green Indicator) • When the LaneSense system senses a lane drift situa- tion, the left thick lane line and left thin line turn solid Lane Sensed (Solid Yellow Thick Line, Solid Yellow Thin Line/Solid Yellow Indicator)
Page 230 228 UNDERSTANDING THE FEATURES OF YOUR VEHICLE thin line remains solid yellow. The LaneSense indicator changes from solid yellow to flashing yellow. At this time torque is applied to the steering wheel in the opposite direction of the lane boundary. •...
Page 231: Changing Lanesense Status
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 229 Changing LaneSense Status PARKSENSE REAR PARK ASSIST — IF EQUIPPED The LaneSense system has settings to adjust the intensity of the torque warning and the warning zone sensitivity The ParkSense Rear Park Assist system provides visual (early/late) that you can configure through the Uconnect and audible indications of the distance between the rear system screen.
Page 232: Parksense Sensors
230 UNDERSTANDING THE FEATURES OF YOUR VEHICLE ParkSense can be active only when the shift lever/gear (200 cm) from the rear fascia/bumper in the horizontal selector is in REVERSE. If ParkSense is enabled at this direction, depending on the location, type and orienta- shift lever/gear selector position, the system will remain tion of the obstacle.
Page 233: Parksense Display
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 231 ParkSense Display When the vehicle is in REVERSE, the EVIC/DID will display the park assist ready system status. The system will indicate a detected obstacle by showing a single arc in one or more regions based on the obstacle’s distance and location relative to the vehicle.
Page 234 232 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Slow Tone/Solid Arc Slow Tone/Solid Arc I n f o r ma t i o n P r o v i d e d b y :...
Page 235 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 233 Fast Tone/Flashing Arc Continuous Tone/Flashing Arc The vehicle is close to the obstacle when the warning display shows one flashing arc and sounds a continuous tone. The following chart shows the warning alert opera- tion when the system is detecting an obstacle: I n f o r ma t i o n P r o v i d e d b y :...
Page 236 234 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING ALERTS Rear Distance Greater 79-59 in 59-47 in 47-39 in 39-25 in 25-12 in Less than (in/cm) than (200-150 cm) (150-120 (120-100 (100-65 (65-30 12 in (30 79 in (200 cm) Arcs — Left None None None...
Page 237: Enabling And Disabling Parksense
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 235 NOTE: ParkSense will reduce the volume of the radio, if on, when the system is sounding an audio tone. Enabling And Disabling ParkSense ParkSense can be enabled and disabled with the ParkSense switch, located on the switch panel below the Uconnect display.
Page 238: Service The Parksense Rear Park Assist System
236 UNDERSTANDING THE FEATURES OF YOUR VEHICLE “Driver Information Display (DID)” for further informa- message. Refer to “Electronic Vehicle Information Center tion. When the shift lever is moved to REVERSE and the (EVIC) or Driver Information Display (DID)” for further system is disabled, the EVIC/DID will display the information.
Page 239: Cleaning The Parksense System
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 237 • When you move the shift lever to the REVERSE Cleaning The ParkSense System position and ParkSense is turned OFF, the EVIC/DID Clean the ParkSense sensors with water, car wash soap will display “PARKSENSE OFF” message for as long and a soft cloth.
Page 240 238 UNDERSTANDING THE FEATURES OF YOUR VEHICLE system misinterpreting a close object as a sensor CAUTION! (Continued) problem, causing the “PARKSENSE UNAVAILABLE • The vehicle must be driven slowly when using SERVICE REQUIRED” message to be displayed in the ParkSense in order to be able to stop in time when EVIC/DID.
Page 241: Parksense Front And Rear Park Assist - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 239 up or moving forward, e.g. during a parking maneuver. WARNING! (Continued) If your vehicle is equipped with an Automatic Transmis- • Before using ParkSense, it is strongly recom- sion, the vehicle brakes may be automatically applied mended that the ball mount and hitch ball assem- and released when performing a reverse parking maneu- bly is disconnected from the vehicle when the...
Page 242 240 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • The automatic braking function may only be applied if NOTE: the vehicle deceleration is not enough to avoid collid- • The driver is always responsible for controlling the ing with a detected obstacle. vehicle.
Page 243: Parksense Sensors
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 241 until the vehicle speed is increased to approximately NOTE: If your vehicle is equipped with the ParkSense 7 mph (11 km/h) or above. When in REVERSE and above Active Park Assist system, six sensors will be located in the system’s operating speed, a warning will appear in the rear fascia/bumper.
Page 244: Parksense Display
242 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The ParkSense Warning screen is located within the If an obstacle is detected in the center rear region, the Electronic Vehicle Information Center (EVIC) or Driver display will show a single solid arc in the center rear Information Display (DID).
Page 245 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 243 Single 1/2 Second Tone/Solid Arc Slow Tone/Solid Arc I n f o r ma t i o n P r o v i d e d b y :...
Page 246 244 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Slow Tone/Solid Arc Fast Tone/Flashing Arc I n f o r ma t i o n P r o v i d e d b y :...
Page 247 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 245 Fast Tone/Flashing Arc Continuous Tone/Flashing Arc The vehicle is close to the obstacle when the warning display shows one flashing arc and sounds a continuous tone. The following chart shows the warning alert opera- tion when the system is detecting an obstacle: I n f o r ma t i o n P r o v i d e d b y :...
Page 248 246 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING ALERTS Rear Distance Greater 79-59 in 59-47 in 47-39 in 39-25 in 25-12 in Less than (in/cm) than (200-150 cm) (150-120 (120-100 (100-65 (65-30 12 in (30 79 in (200 cm) Arcs — Left None None None...
Page 249 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 247 NOTE: ParkSense will reduce the volume of the radio, if If an obstacle is detected in the center front region, the on, when the system is sounding an audio tone. display will show a single arc in the center front region. As the vehicle moves closer to the obstacle, the display Front Park Assist will show the single arc moving closer to the vehicle.
Page 250 248 UNDERSTANDING THE FEATURES OF YOUR VEHICLE No Tone/Solid Arc No Tone/Flashing Arc I n f o r ma t i o n P r o v i d e d b y :...
Page 251 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 249 Fast Tone/Flashing Arc Continuous Tone/Flashing Arc The vehicle is close to the obstacle when the warning display shows one flashing arc and sounds a continuous tone. The following chart shows the warning alert opera- tion when the system is detecting an obstacle: I n f o r ma t i o n P r o v i d e d b y :...
Page 252 250 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING ALERTS Front Distance Greater than 47-39 in 39-25 in 25-12 in Less than (in/cm) 47 in (120 cm) (120-100 cm) (100-65 cm) (65-30 cm) 12 in (30 cm) Arcs — Left None None None 2nd Flashing...
Page 253: Enabling And Disabling Parksense
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 251 If the Uconnect System is equipped, chime volume settings will not be accessible from the EVIC/DID. The chime volume settings include LOW, MEDIUM, and HIGH. The factory default volume setting is MEDIUM. ParkSense will retain its last known configuration state through ignition cycles.
Page 254: Service The Parksense Park Assist System
252 UNDERSTANDING THE FEATURES OF YOUR VEHICLE “Driver Information Display (DID)” for further informa- FRONT SENSORS , or the PARKSENSE UNAVAIL- tion. When the shift lever is moved to REVERSE and the ABLE SERVICE REQUIRED message for five seconds. system is disabled, the EVIC/DID will display the When the shift lever/gear selector is moved to Reverse “PARKSENSE OFF”...
Page 255: Cleaning The Parksense System
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 253 car graphic will remain displayed for as long as the Cleaning The ParkSense System vehicle is in REVERSE. Refer to “Electronic Vehicle Clean the ParkSense sensors with water, car wash soap Information Center (EVIC) or Driver Information Dis- and a soft cloth.
Page 256 254 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • When you move the shift lever to the REVERSE misinterpreting a close object as a sensor problem, position and ParkSense is turned off, the instrument causing the “PARKSENSE UNAVAILABLE SERVICE cluster will display “PARKSENSE OFF” for as long as REQUIRED”...
Page 257 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 255 CAUTION! (Continued) WARNING! (Continued) the sensors will not be detected when they are in pay attention to your surroundings. Failure to do so close proximity. can result in serious injury or death. • The vehicle must be driven slowly when using •...
Page 258: Parksense Active Park Assist System - If Equipped
256 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • The system is provided to assist the driver and not to PARKSENSE ACTIVE PARK ASSIST SYSTEM — IF EQUIPPED substitute the driver. • During a semi-automatic maneuver, if the driver The ParkSense Active Park Assist system is intended to assist the driver during parallel and perpendicular park- touches the steering wheel after being instructed to ing maneuvers by identifying a proper parking space,...
Page 259: Enabling And Disabling The Parksense Active Park Assist System
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 257 The system will also continuously perform the dy- namic vehicle calibration to account for differences such as over or under inflated tires and new tires. Enabling And Disabling The ParkSense Active Park Assist System The ParkSense Active Park Assist system can be enabled and disabled with the ParkSense Active Park Assist switch, located on the switch panel below the Uconnect...
Page 260 258 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • The ParkSense Active Park Assist system will allow a The ParkSense Active Park Assist system will turn off automatically for any of the following conditions: maximum of six shifts between DRIVE and REVERSE. If the maneuver cannot be completed within six shifts, •...
Page 261: Parallel Parking Space Assistance Operation/Display
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 259 NOTE: If the vehicle is driven above approximately Parallel Parking Space Assistance Operation/ 15 mph (25 km/h), the EVIC/DID will instruct the driver Display to slow down. If the vehicle is driven above approxi- When the ParkSense Active Park Assist system is enabled mately 18 mph (30 km/h), the system will cancel.
Page 262 260 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • The driver needs to make sure that the selected parking space for the maneuver remains free and clear of any obstructions (e.g. pedestrians, bicycles, etc.). • The driver is responsible to ensure that the selected parking space is suitable for the maneuver and free/ clear of anything that may be overhanging or protrud- ing into the parking space (e.g., ladders, tailgates, etc.
Page 263 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 261 Space Found — Keep Moving Forward Space Found — Stop And Remove Hands From Wheel Once the vehicle is in position, you will be instructed to Once the vehicle is at a standstill with your hands stop the vehicle’s movement and remove your hands removed from the steering wheel, you will be instructed from the steering wheel.
Page 264 262 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Space Found — Shift To Reverse Check Surroundings — Wait For Steering To Complete When the driver places the shift lever into the REVERSE The system will then instruct the driver to check their position, the system may instruct the driver to wait for surroundings and move backward.
Page 265 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 263 • When the system instructs the driver to remove their hands from the steering wheel, the driver should check their surroundings and begin to back up slowly. • The ParkSense Active Park Assist system will allow a maximum of six shifts between DRIVE and REVERSE.
Page 266 264 UNDERSTANDING THE FEATURES OF YOUR VEHICLE When the vehicle has reached the end of its backward NOTE: It is the drivers responsibility to use the brake movement, the system will instruct the driver to check and stop the vehicle. The driver should check their their surroundings and stop the vehicle’s movement.
Page 267 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 265 Check Surroundings — Shift To Drive Check Surroundings — Wait For Steering To Complete When the driver places the shift lever into the DRIVE The system will then instruct the driver to check their position, the system may instruct the driver to wait for surroundings and move forward.
Page 268 266 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Check Surroundings — Move Forward Check Surroundings — STOP When the vehicle has reached the end of its forward NOTE: It is the drivers responsibility to use the brake movement, the system will instruct the driver to check and stop the vehicle.
Page 269 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 267 Once the vehicle is in a standstill condition, the driver will be instructed to place the shift lever into the RE- VERSE position. Check Surroundings — Wait For Steering To Complete The system will then instruct the driver to check their surroundings and move backward.
Page 270: Perpendicular Parking Space Assistance Operation/Display
268 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Check Surroundings — Move Backward Active ParkSense Complete — Check Parking Position Your vehicle is now in the parallel park position. When Perpendicular Parking Space Assistance the maneuver is complete, the driver will be instructed to Operation/Display check the vehicle’s parking position.
Page 271 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 269 steering wheel switch to change your parking space setting to a perpendicular maneuver. You may switch back to parallel parking if you desire. Once the driver pushes OK for a perpendicular parking maneuver, the “Active ParkSense Searching - Push OK to Switch to Parallel”...
Page 272 270 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • When seeking for a parking space, the driver should NOTE: drive as parallel or perpendicular (depending on the • When searching for a parking space, use the turn type of maneuver) to other vehicles as possible. signal indicator to select which side of the vehicle you •...
Page 273 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 271 Space Found — Keep Moving Forward Space Found — Stop And Remove Hands From Wheel Once the vehicle is in position, you will be instructed to Once the vehicle is at a standstill with your hands stop the vehicle’s movement and remove your hands removed from the steering wheel, you will be instructed from the steering wheel.
Page 274 272 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Space Found — Shift To Reverse Check Surroundings — Wait For Steering To Complete When the driver places the shift lever into the REVERSE The system will then instruct the driver to check their position, the system may instruct the driver to wait for surroundings and move backward.
Page 275 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 273 • When the system instructs the driver to remove their hands from the steering wheel, the driver should check their surroundings and begin to back up slowly. • The ParkSense Active Park Assist system will allow a maximum of six shifts between DRIVE and REVERSE.
Page 276 274 UNDERSTANDING THE FEATURES OF YOUR VEHICLE When the vehicle has reached the end of its backward NOTE: It is the drivers responsibility to use the brake movement, the system will instruct the driver to check and stop the vehicle. The driver should check their their surroundings and stop the vehicle’s movement.
Page 277 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 275 Check Surroundings — Shift To Drive Check Surroundings — Wait For Steering To Complete When the driver places the shift lever into the DRIVE The system will then instruct the driver to check their position, the system may instruct the driver to wait for surroundings and move forward.
Page 278 276 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Check Surroundings — Move Forward Check Surroundings — STOP When the vehicle has reached the end of its forward NOTE: It is the drivers responsibility to use the brake movement, the system will instruct the driver to check and stop the vehicle.
Page 279 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 277 Once the vehicle is in a standstill condition, the driver will be instructed to place the shift lever into the RE- VERSE position. Check Surroundings — Wait For Steering To Complete The system will then instruct the driver to check their surroundings and move backward.
Page 280 278 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Check Surroundings — Move Backward Active ParkSense Complete — Check Parking Position Your vehicle is now in the perpendicular park position. When the maneuver is complete, the driver will be in- structed to check the vehicle’s parking position. If the driver is satisfied with the vehicle position, they should shift to PARK.
Page 281 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 279 CAUTION! WARNING! • The ParkSense Active Park Assist system is only a • Drivers must be careful when performing parallel parking aid and it is unable to recognize every or perpendicular parking maneuvers even when obstacle, including small obstacles.
Page 282: Parkview Rear Back Up Camera - If
280 UNDERSTANDING THE FEATURES OF YOUR VEHICLE screen. After five seconds this note will disappear. The WARNING! (Continued) ParkView camera is located on the rear of the vehicle damage to vehicles or obstacles because the hitch above the rear License plate. ball will be much closer to the obstacle than the NOTE: The ParkView Rear Back Up Camera has pro- rear fascia when the loudspeaker sounds the con-...
Page 283 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 281 When enabled, active guide lines are overlaid on the When enabled, fixed guide lines are overlaid on the image to illustrate the width of the vehicle and its image to illustrate the width of the vehicle. projected backup path based on the steering wheel Different colored zones indicate the distance to the rear of position.
Page 284: Garage Door Opener - If Equipped
282 UNDERSTANDING THE FEATURES OF YOUR VEHICLE CAUTION! WARNING! (Continued) check for pedestrians, animals, other vehicles, ob- • To avoid vehicle damage, ParkView should only be structions, or blind spots before backing up. You are used as a parking aid. The ParkView camera is responsible for the safety of your surroundings and unable to view every obstacle or object in your must continue to pay attention while backing up.
Page 285: Before You Begin Programming Homelink
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 283 The HomeLink buttons that are located in the headliner NOTE: HomeLink is disabled when the Vehicle Security or sun visor designate the three different HomeLink Alarm is active. channels. Before You Begin Programming HomeLink The HomeLink indicator is located above the center Ensure your vehicle is parked outside of the garage button.
Page 286: Programming A Rolling Code
284 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: • Erasing all channels should only be performed when programming HomeLink for the first time. Do not erase channels when programming additional buttons. • If you have any problems, or require assistance, please call toll-free 1-800-355-3515 or, on the Internet at HomeLink.com for information or assistance.
Page 287 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 285 2. Place the hand-held transmitter 1 to 3 inches (3 to 8 Firmly push and release the “LEARN” or “TRAIN- cm) away from the HomeLink button you wish to ING” button. On some garage door openers/devices program while keeping the HomeLink indicator light there may be a light that blinks when the garage door in view.
Page 288: Programming A Non-Rolling Code
286 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Reprogramming A Single HomeLink Button 2. Place the hand-held transmitter 1 to 3 inches (3 to 8 (Rolling Code) cm) away from the HomeLink button you would like to program while keeping the HomeLink indicator To reprogram a channel that has been previously trained, light in view.
Page 289: Canadian/Gate Operator Programming
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 287 • To program the remaining two HomeLink buttons, Canadian/Gate Operator Programming repeat each step for each remaining button. DO NOT For programming transmitters in Canada/United States erase the channels. that require the transmitter signals to “time-out” after several seconds of transmission.
Page 290 288 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 2. Place the hand-held transmitter 1 to 3 inches (3 to 8 NOTE: cm) away from the HomeLink button you wish to • If the indicator light stays on constantly, program- program while keeping the HomeLink indicator light ming is complete and the garage door/device should in view.
Page 291: Using Homelink
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 289 2. Push and hold the desired HomeLink button until the To do this, push and hold the two outside buttons for 20 indicator light begins to flash after 20 seconds. Do not seconds until the red indicator flashes. Note that all release the button.
Page 292: General Information
290 UNDERSTANDING THE FEATURES OF YOUR VEHICLE If you have any problems, or require assistance, please WARNING! (Continued) call toll-free 1-800-355-3515 or, on the Internet at after 1982. Do not use a garage door opener without HomeLink.com for information or assistance. these safety features.
Page 293: Power Sunroof With Power Shade - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 291 NOTE: • The transmitter has been tested and it complies with FCC and IC rules. Changes or modifications not ex- pressly approved by the party responsible for compli- ance could void the user’s authority to operate the device.
Page 294 292 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! (Continued) accessible to children. Do not leave the ignition of a vehicle equipped with Keyless Enter-N-Go in the ACC or ON/RUN mode. Occupants, particularly unattended children, can become entrapped by the power sunroof while operating the power sunroof switch.
Page 295: Opening Sunroof - Express
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 293 Opening Sunroof — Express Opening Sunroof — Manual Mode A comfort stop position and full open position are the A comfort stop position is a programmed automatic stop programmed automatic stops for the sunroof open posi- for the sunroof open position.
Page 296: Closing Sunroof - Manual Mode
294 UNDERSTANDING THE FEATURES OF YOUR VEHICLE position. The sunroof will close fully and stop automati- NOTE: If the sunshade is in the closed position when the cally. This is called “Express Close.” During Express vent switch is pushed, the sunshade will automatically Close operation, any other actuation of the switch will cycle to the halfway open position prior to the sunroof stop the sunroof.
Page 297: Closing Power Shade - Express
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 295 the full-open position. Any release of the switch will stop movement and the shade will remain in a partially closed the movement and the shade will remain in a partially condition until the switch is pushed again. opened condition until the switch is pushed again.
Page 298: Sunroof Maintenance
296 UNDERSTANDING THE FEATURES OF YOUR VEHICLE open or partially open positions. This is a normal occur- NOTE: Ignition Off time is programmable through the rence and can be minimized. If the buffeting occurs with Uconnect System. Refer to “Uconnect Settings/Customer the rear windows open, then open the front and rear Programmable Features”...
Page 299 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 297 NOTE: • All accessories connected to the “battery” powered outlets should be removed or turned off when the vehicle is not in use to protect the battery against discharge. • To ensure proper cigar lighter operation, a MOPAR knob and element must be used.
Page 300 298 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Rear Power Outlet Rear Cargo Power Outlet Fuse Locations NOTE: The rear cargo power outlet can be changed to “battery” powered all the time by switching the power outlet Power Distribution Center panel fuse from fuse location F91 to F81.
Page 301 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 299 WARNING! To avoid serious injury or death: • Only devices designed for use in this type of outlet should be inserted into any 12 Volt outlet. • Do not touch with wet hands. •...
Page 302: Power Inverter - If Equipped
300 UNDERSTANDING THE FEATURES OF YOUR VEHICLE POWER INVERTER — IF EQUIPPED CAUTION! • Many accessories that can be plugged in draw power from the vehicle’s battery, even when not in use (i.e., cellular phones, etc.). Eventually, if plugged in long enough, the vehicle’s battery will discharge sufficiently to degrade battery life and/or prevent the engine from starting.
Page 303 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 301 150 Watts. Certain high-end game consoles will exceed WARNING! this power limit, as will most power tools. To avoid serious injury or death: To turn on the power inverter outlet, simply plug in the •...
Page 304: Wireless Charging Pad - If Equipped
302 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WIRELESS CHARGING PAD — IF EQUIPPED your Qi enabled mobile phone. Qi is a standard that uses magnetic induction to transfer power to your mobile device. Your mobile phone must be designed for Qi wireless charging, be equipped with an aftermarket sleeve or equipped with a back plate from your mobile phone provider, or an online or local electronics retailer.
Page 305: Wireless Charging Pad Operation
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 303 Wireless Charging Pad Operation To use the wireless charging pad, the coil in your mobile phone needs to align with the coil in the charging pad, which is located directly under the Qi logo. Since each mobile phone’s coil location is different, you may need a few attempts to locate the correct spot for your mobile phone:...
Page 306 304 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 4. Adjust the wireless charging pad mobile phone cradle NOTE: The initial adjustment will only need to be done to hold the mobile phone in position. The cradle once as long as only one mobile phone is used. If a moves by pushing down on the finger tabs and different mobile phone is used, the cradle will need to be adjusting the cradle in or out.
Page 307: Cupholders
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 305 CAUTION! Do not place your vehicle Key Fob on the wireless charging pad, the Keyless Enter-N-Go feature may not work properly while a mobile phone is being charged. CUPHOLDERS There are two cupholders for the front seat passengers, located in the center console.
Page 308: Storage
306 UNDERSTANDING THE FEATURES OF YOUR VEHICLE There is also an additional storage bin located above the instrument panel in the center of the dash. Rear Cupholders STORAGE Glove Compartment Glove Compartment The glove compartment is located on the passengers side of the instrument panel.
Page 309: Console Storage Compartment
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 307 Console Storage Compartment Some vehicles may be equipped with a wireless charging pad located in the upper portion of the center console. Refer to Wireless Charging Pad-If Equipped in this section for more information. Center Console The center console has a storage area which can hold cell phones, PDAs, and other small items.
Page 310: Flip 'N Stow Front Passenger Seat Storage - If Equipped
308 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Flip ’n Stow Front Passenger Seat Storage — If Equipped Some models may be equipped with storage under the front passenger seat cushion. Pull upward on the seat cushion loop to open the storage compartment. Center Console Storage WARNING! Do not operate this vehicle with a console compart-...
Page 311: Cargo Area Features
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 309 WARNING! Be certain that the seat cushion is locked securely into position before using the seat. Otherwise, the seat will not provide the proper stability for passen- gers. An improperly latched seat cushion could cause serious injury.
Page 312: Cargo Extension Panels
310 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Cargo Extension Panels WARNING! Cargo extension panels can be folded and unfolded. • Cargo tie-downs are not safe anchors for a child When the rear seats are moved to the more forward seat tether strap. In a sudden stop or accident, a positions and the rear seat backs are folded down, the tie-down could pull loose and allow the child seat extension panels can be unfolded manually by hand (2 of...
Page 313: Rear Storage Bins
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 311 Rear Storage Bins WARNING! (Continued) The rear storage bins are located in the rear of the vehicle handling. To avoid loss of control resulting in per- on the sides of the load floor. sonal injury, follow these guidelines for loading your vehicle: •...
Page 314: Rear Window Features
312 UNDERSTANDING THE FEATURES OF YOUR VEHICLE REAR WINDOW FEATURES Rear Window Wiper/Washer The rear wiper/washer controls are located on the wind- shield wiper/washer lever on the right side of the steering column. The rear wiper/washer is operated by rotating a switch, located at the middle of the lever. Rear Wiper/Washer Control Rotate the center portion of the lever upward to the first detent for intermittent operation and to...
Page 315: Rear Window Defroster
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 313 To use the washer, push the lever forward and Rear Window Defroster hold while spray is desired. If the lever is The rear window defroster button is located on pushed while in the intermittent setting, the the switch bank by the manual climate controls.
Page 316: Roof Luggage Rack - If Equipped
314 UNDERSTANDING THE FEATURES OF YOUR VEHICLE ROOF LUGGAGE RACK — IF EQUIPPED CAUTION! The load carried on the roof, when equipped with a Failure to follow these cautions can cause damage to luggage rack, must not exceed 150 lbs (68 kg), and it the heating elements: should be uniformly distributed over the cargo area.
Page 317 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 315 CAUTION! WARNING! • To avoid damage to the roof rack and vehicle, do Cargo must be securely tied down before driving not exceed the maximum roof rack load capacity. your vehicle. Improperly secured loads can fly off the Always distribute heavy loads as evenly as pos- vehicle, particularly at high speeds, resulting in per- sible and secure the load appropriately.
Page 318 I n f o r ma t i o n P r o v i d e d b y :...
Page 319 UNDERSTANDING YOUR INSTRUMENT PANEL CONTENTS INSTRUMENT PANEL FEATURES ..320 ELECTRONIC VEHICLE INFORMATION CENTER (EVIC) ......361 INSTRUMENT CLUSTER —...
Page 320 318 UNDERSTANDING YOUR INSTRUMENT PANEL ▫ Customer Programmable Features/Personal ▫ Manual Climate Controls Without Settings — Uconnect 5.0 Settings...381 Touchscreen — If Equipped ....421 ▫...
Page 321 UNDERSTANDING YOUR INSTRUMENT PANEL 319 ▫ Get Started ......447 ▫ Register (8.4A/8.4AN) ....460 ▫...
Page 322: Instrument Panel Features
320 UNDERSTANDING YOUR INSTRUMENT PANEL INSTRUMENT PANEL FEATURES 1 — Air Demister Outlet 5 — Instrument Cluster 9 — Passenger Air Bag 13 — Start/Stop Ignition Button 2 — Air Outlet 6 — Cruise Controls 10 — Glove Compartment 14 — Liftgate Release Button 3 —...
Page 323: Instrument Cluster - Base
UNDERSTANDING YOUR INSTRUMENT PANEL 321 INSTRUMENT CLUSTER — BASE Base EVIC Instrument Cluster I n f o r ma t i o n P r o v i d e d b y :...
Page 324 322 UNDERSTANDING YOUR INSTRUMENT PANEL 1. Tachometer The fuel pump symbol points to the side of the • Indicates the engine speed in revolutions per minute vehicle where the fuel door is located. (RPM x 1000). 5. Temperature Gauge • The temperature gauge shows engine coolant tem- 2.
Page 325 UNDERSTANDING YOUR INSTRUMENT PANEL 323 CAUTION! WARNING! Driving with a hot engine cooling system could A hot engine cooling system is dangerous. You or damage your vehicle. If the temperature gauge reads others could be badly burned by steam or boiling “H”...
Page 326: Instrument Cluster - Premium
324 UNDERSTANDING YOUR INSTRUMENT PANEL INSTRUMENT CLUSTER — PREMIUM Premium DID Instrument Cluster I n f o r ma t i o n P r o v i d e d b y :...
Page 327 UNDERSTANDING YOUR INSTRUMENT PANEL 325 1. Tachometer 5. Temperature Gauge • Indicates the engine speed in revolutions per minute • The temperature gauge shows engine coolant tem- (RPM x 1000). perature. Any reading within the normal range indi- cates that the engine cooling system is operating 2.
Page 328: Warning And Indicator Lights
326 UNDERSTANDING YOUR INSTRUMENT PANEL WARNING AND INDICATOR LIGHTS CAUTION! IMPORTANT: The warning / indicator light switches on Driving with a hot engine cooling system could in the instrument panel together with a dedicated mes- damage your vehicle. If the temperature gauge reads sage and/or acoustic signal when applicable.
Page 329: Red Telltale Indicator Lights
UNDERSTANDING YOUR INSTRUMENT PANEL 327 Red Telltale Indicator Lights Seat Belt Reminder Warning Light Red Telltale What It Means Light Seat Belt Reminder Warning Light When the ignition switch is first turned to ON/RUN, this light will turn on for four to eight seconds as a bulb check.
Page 330 328 UNDERSTANDING YOUR INSTRUMENT PANEL Air Bag Warning Light Red Telltale What It Means Light Air Bag Warning Light This light will turn on for four to eight seconds as a bulb check when the ignition switch is first turned to ON/RUN. If the light is either not on during starting, stays on, or turns on while driving, have the system inspected at an authorized dealer as soon as possible.
Page 331 UNDERSTANDING YOUR INSTRUMENT PANEL 329 Brake Warning Light Red Telltale What It Means Light Brake Warning Light This light monitors various brake functions, including brake fluid level and parking brake application. If the brake light turns on it may indicate that the parking brake is applied, that the brake fluid level is low, or that there is a problem with the anti-lock brake system reser- voir.
Page 332 330 UNDERSTANDING YOUR INSTRUMENT PANEL The dual brake system provides a reserve braking capac- If brake failure is indicated, immediate repair is necessary. ity in the event of a failure to a portion of the hydraulic system. A leak in either half of the dual brake system is WARNING! indicated by the Brake Warning Light, which will turn on Driving a vehicle with the red brake light on is...
Page 333 UNDERSTANDING YOUR INSTRUMENT PANEL 331 Operation of the Brake Warning Light can be checked by The light also will turn on when the parking brake is turning the ignition switch from the OFF position to the applied with the ignition switch in the ON/RUN posi- ON/RUN position.
Page 334 332 UNDERSTANDING YOUR INSTRUMENT PANEL Oil Pressure Warning Light Red Telltale Light What It Means Oil Pressure Warning Light This light indicates low engine oil pressure. If the light turns on while driving, stop the vehicle and shut off the engine as soon as possible. A chime will sound when this light turns on.
Page 335 UNDERSTANDING YOUR INSTRUMENT PANEL 333 Red Warning Light What It Means the temperature reading does not return to normal, turn the engine off immediately and call for service. Refer to “If Your Engine Overheats” in “What To Do In Emergencies” for further information.
Page 336 334 UNDERSTANDING YOUR INSTRUMENT PANEL Charging System Warning Light Red Telltale What It Means Light Charging System Warning Light This light shows the status of the electrical charging system. If the light stays on or comes on while driving, turn off some of the vehicle’s nonessential electrical devices or increase engine speed (if at idle).
Page 337 UNDERSTANDING YOUR INSTRUMENT PANEL 335 Electronic Throttle Control (ETC) Warning Light Red Telltale What It Means Light Electronic Throttle Control (ETC) Warning Light This light informs you of a problem with the Electronic Throttle Control (ETC) system. If a problem is detected while the engine is running, the light will either stay on or flash de- pending on the nature of the problem.
Page 338 336 UNDERSTANDING YOUR INSTRUMENT PANEL Electric Power Steering Fail Warning — If Equipped Red Telltale What It Means Light Electric Power Steering Fail Warning This light is used to manage the electrical warning of the EPS (Power Steering System). Re- fer to “Power Steering”...
Page 339: Yellow Telltale Indicator Lights
UNDERSTANDING YOUR INSTRUMENT PANEL 337 Liftgate Ajar Warning Light Red Telltale What It Means Light Liftgate Ajar Warning Light This indicator will turn when the liftgate is ajar. NOTE: If the vehicle is moving, there will also be a single chime. Yellow Telltale Indicator Lights Rear Fog Light Indicator Yellow Telltale...
Page 340 338 UNDERSTANDING YOUR INSTRUMENT PANEL Engine Check/Malfunction Indicator Light (MIL) Yellow Telltale What It Means Light Engine Check/Malfunction Indicator Light (MIL) The Engine Check/Malfunction Indicator Light (MIL) is a part of an Onboard Diagnostic System called OBD II that monitors engine and automatic transmission control systems. The light will illuminate when the ignition is in the ON position before engine start.
Page 341 UNDERSTANDING YOUR INSTRUMENT PANEL 339 CAUTION! WARNING! Prolonged driving with the Malfunction Indicator A malfunctioning catalytic converter, as referenced Light (MIL) on could cause damage to the engine above, can reach higher temperatures than in normal control system. It also could affect fuel economy and operating conditions.
Page 342 340 UNDERSTANDING YOUR INSTRUMENT PANEL Electronic Stability Control (ESC) Indicator Light — If Equipped Yellow Telltale What It Means Light Electronic Stability Control (ESC) Indicator Light The “ESC Indicator Light” in the instrument cluster will come on when the ignition switch is turned to the ON/RUN position.
Page 343 UNDERSTANDING YOUR INSTRUMENT PANEL 341 Electronic Stability Control (ESC) OFF Indicator Light — If Equipped Yellow Telltale What It Means Light Electronic Stability Control (ESC) OFF Indicator Light This light indicates the Electronic Stability Control (ESC) is off. I n f o r ma t i o n P r o v i d e d b y :...
Page 344 342 UNDERSTANDING YOUR INSTRUMENT PANEL Tire Pressure Monitoring Indicator Light Yellow Telltale What It Means Light Tire Pressure Monitoring Indicator Light The warning light switches on and a message is displayed to indicate that the tire pressure is lower than the recommended value and/or that slow pressure loss is occurring. In these cases, optimal tire duration and fuel consumption may not be guaranteed.
Page 345 UNDERSTANDING YOUR INSTRUMENT PANEL 343 IMPORTANT: Do not continue driving with one or more possible and inflate them to the proper pressure. Driving on a significantly under-inflated tire causes the tire to flat tires as handling may be compromised. Stop the overheat and can lead to tire failure.
Page 346 344 UNDERSTANDING YOUR INSTRUMENT PANEL When the malfunction indicator is illuminated, the sys- CAUTION! (Continued) tem may not be able to detect or signal low tire pressure equipped on your vehicle. Undesirable system opera- as intended. TPMS malfunctions may occur for a variety tion or sensor damage may result when using re- of reasons, including the installation of replacement or placement equipment that is not of the same size,...
Page 347 UNDERSTANDING YOUR INSTRUMENT PANEL 345 Anti-Lock Brake (ABS) Indicator Light Yellow Telltale What It Means Light Anti-Lock Brake (ABS) Indicator Light This light monitors the Anti-Lock Brake System (ABS). The light will turn on when the igni- tion switch is placed in the ON/RUN position and may stay on for as long as four seconds. If the ABS light remains on or turns on while driving, then the Anti-Lock portion of the brake system is not functioning and service is required.
Page 348 346 UNDERSTANDING YOUR INSTRUMENT PANEL Electronic Park Brake Fail Light Yellow Telltale What It Means Light Electronic Park Brake Fail Warning Light This telltale will turn on to indicate the Electronic Park Brake is not functioning properly and that service is required. Contact your authorized dealership. Low Fuel Indicator Light Yellow Telltale What It Means...
Page 349 UNDERSTANDING YOUR INSTRUMENT PANEL 347 Loose Fuel Filler Cap Indicator Light — If Equipped Yellow Telltale What It Means Light Loose Fuel Filler Cap Indicator Light This light will illuminate when fuel filler cap is loose. Properly close the filler cap to disen- gage the light.
Page 350 348 UNDERSTANDING YOUR INSTRUMENT PANEL CAUTION! WARNING! Continuous driving with the Transmission Tempera- If you continue operating the vehicle when the ture Warning Light illuminated will eventually cause Transmission Temperature Warning Light is illumi- severe transmission damage or transmission failure. nated you could cause the fluid to boil over, come in contact with hot engine or exhaust components and cause a fire.
Page 351 UNDERSTANDING YOUR INSTRUMENT PANEL 349 Forward Collision Indicator Light — If Equipped Yellow Telltale What It Means Light Forward Collision Indicator Light This telltale will turn on warn you of a possible collision with the vehicle in front of you. LaneSense Indicator Light —...
Page 352 350 UNDERSTANDING YOUR INSTRUMENT PANEL Yellow Telltale What It Means Light • When the LaneSense system senses a lane drift situation, the LaneSense indicator changes from solid green to solid yellow. • When the LaneSense system senses the lane has been approached and is in a lane departure situation, the LaneSense indicator changes from solid white/green to flashing yellow.
Page 353 UNDERSTANDING YOUR INSTRUMENT PANEL 351 Adaptive Cruise Control Alert Indicator Light — If Equipped Yellow Telltale What It Means Light Adaptive Cruise Control Alert Indicator Light This light will turn on when a ACC is not operating and needs service. For further informa- tion, refer to “Adaptive Cruise Control (ACC)”...
Page 354 352 UNDERSTANDING YOUR INSTRUMENT PANEL Service 4WD Indicator Light — If Equipped Yellow Telltale What It Means Light Service 4WD Indicator Light If the light stays on or comes on during driving, it means that the 4WD system is not func- tioning properly and that service is required.
Page 355 UNDERSTANDING YOUR INSTRUMENT PANEL 353 Yellow Telltale What It Means Light Refer to “Four-Wheel Drive Operation — If Equipped” in “Starting And Operating” for fur- ther information on four-wheel drive operation and proper use. Rear Axle Lock Indicator Light — If Equipped Yellow Telltale What It Means Light...
Page 356: Green Telltale Indicator Lights
354 UNDERSTANDING YOUR INSTRUMENT PANEL Green Telltale Indicator Lights Park/Headlight ON Indicator Light Green Telltale What It Means Light Park/Headlight ON Indicator Light This indicator will illuminate when the park lights or headlights are turned on. Front Fog Indicator Light — If Equipped Green Telltale What It Means Light...
Page 357 UNDERSTANDING YOUR INSTRUMENT PANEL 355 Turn Signal Indicator Lights Green Tell- What It Means tale Light Turn Signal Indicator Lights The instrument cluster arrow will flash independently for the LEFT or RIGHT turn signal as se- lected, as well as the exterior turn signal lamp(s) (front and rear) as selected when the multi- function lever is moved down (LEFT) or up (RIGHT).
Page 358 356 UNDERSTANDING YOUR INSTRUMENT PANEL Stop/Start Active Indicator Light — If Equipped Green Telltale What It Means Light Stop/Start Active Indicator Light This telltale will illuminate when the Stop/Start function is in “Autostop” mode. LaneSense Indicator Light — If Equipped Green Telltale What It Means Light...
Page 359: White Telltale Indicator Light
UNDERSTANDING YOUR INSTRUMENT PANEL 357 Electronic Speed Control Set Indicator Light Green Telltale What It Means Light Electronic Speed Control Set Indicator Light This light will turn on when the electronic speed control has been set. White Telltale Indicator Light LaneSense Indicator Light —...
Page 360 358 UNDERSTANDING YOUR INSTRUMENT PANEL Electronic Speed Control ON Indicator Light White Telltale What It Means Light Electronic Speed Control ON Indicator Light This light will turn on when the electronic speed control is ON. Adaptive Cruise Control (ACC) Distance Setting Display Light — If Equipped White Telltale What It Means Light...
Page 361 UNDERSTANDING YOUR INSTRUMENT PANEL 359 Hill Decent Control (HDC) Indicator Light — If Equipped White Telltale What It Means Light Hill Decent Control (HDC) Indicator Light This indicator shows when the Hill Descent Control (HDC) feature is turned on. The lamp will be on solid when HDC is armed.
Page 362: Blue Telltale Indicator Light
360 UNDERSTANDING YOUR INSTRUMENT PANEL Blue Telltale Indicator Light High Beam Indicator Light Blue Telltale What It Means Light High Beam Indicator Light This indicator shows that the high beam headlights are on. Push the multifunction control lever away from you to switch the headlights to high beam. Pull the lever toward you to switch the headlights back to low beam.
Page 363: Electronic Vehicle Information Center (Evic)
UNDERSTANDING YOUR INSTRUMENT PANEL 361 ELECTRONIC VEHICLE INFORMATION CENTER The EVIC Menu items consist of the following: (EVIC) • Speedometer The Electronic Vehicle Information Center (EVIC) fea- • Vehicle Info tures a driver-interactive display that is located in the • Driver Assist instrument cluster.
Page 364 362 UNDERSTANDING YOUR INSTRUMENT PANEL • UP Arrow Button The system allows the driver to select information by pushing the following buttons mounted on the steering Push and release the UP arrow button to scroll wheel: upward through main menu submenus.
Page 365: Oil Change Reset
UNDERSTANDING YOUR INSTRUMENT PANEL 363 • OK Button Unless reset, this message will continue to display each time the ignition is cycled to the ON/RUN position. To Push the OK button to access/select the information turn off the message temporarily, push and release the screens or submenu screens of a main menu item.
Page 366: Evic Selectable Menu Items
364 UNDERSTANDING YOUR INSTRUMENT PANEL Secondary Method Of Navigating To The Oil Life EVIC Selectable Menu Items Screen In The DID And Holding OK Push and release the UP or DOWN arrow buttons until the desired Selectable Menu icon is highlighted in the 1.
Page 367 UNDERSTANDING YOUR INSTRUMENT PANEL 365 • Tire Pressure • Refer to “Tire Pressure Monitoring System (TPMS)” under “Starting and Operating” for further informa- Push and release the UP or DOWN arrow button until tion. “Tire Pressure” is highlighted in the EVIC. Push and •...
Page 368 366 UNDERSTANDING YOUR INSTRUMENT PANEL Driver Assist Push and release the SET + or the SET- button (located on the steering wheel) and the following will display in the Adaptive Cruise Control (ACC) Menu EVIC: The EVIC displays the current ACC system settings. The ACC SET information displayed depends on ACC system status.
Page 369 UNDERSTANDING YOUR INSTRUMENT PANEL 367 • The EVIC will return to the last display selected after • Average Fuel Economy five seconds of no ACC display activity. • Current Fuel Economy (MPG or L/100 km) Refer to “Adaptive Cruise Control (ACC) — If Trip Info Equipped”...
Page 370 368 UNDERSTANDING YOUR INSTRUMENT PANEL Stop/Start Menu Item – If Equipped Screen Setup Push and release the UP or DOWN arrow button until Push and release the UP or DOWN arrow button until the Stop/Start menu item is highlighted in the EVIC. the Screen Setup Menu item is highlighted in the EVIC.
Page 371 UNDERSTANDING YOUR INSTRUMENT PANEL 369 • Time • Current MPG or L/100 km • Range To Empty • None • Average MPG or L/100 km Upper Right • Current MPG or L/100 km • Compass (default setting) • Trip A Distance •...
Page 372: Driver Information Display (Did)
370 UNDERSTANDING YOUR INSTRUMENT PANEL DRIVER INFORMATION DISPLAY (DID) The DID Menu items consist of the following: • Speedometer The Driver Information Display (DID) features a driver- interactive display that is located in the instrument • Vehicle Info cluster. • Driver Assist •...
Page 373 UNDERSTANDING YOUR INSTRUMENT PANEL 371 • UP Arrow Button The system allows the driver to select information by pushing the following buttons mounted on the steering Push and release the UP arrow button to scroll wheel: upward through main menu submenus.
Page 374: Oil Change Reset
372 UNDERSTANDING YOUR INSTRUMENT PANEL • OK Button position. To turn off the message temporarily, push and release the OK button. To reset the oil change indicator Push the OK button to access/select the information system (after performing the scheduled maintenance), screens or submenu screens of a main menu item.
Page 375: Did Selectable Menu Items
UNDERSTANDING YOUR INSTRUMENT PANEL 373 2. Fully depress the accelerator pedal, slowly, three times Vehicle Info (Customer Information Features) within 10 seconds. Push and release the UP or DOWN arrow button until the Vehicle Info Menu item is highlighted in the DID. 3.
Page 376 374 UNDERSTANDING YOUR INSTRUMENT PANEL the pressure value of the low tire displayed in a 5. Oil Life different color than the other tire pressure value. Displays the remaining oil life. • If the Tire Pressure system requires service, “Service 6.
Page 377 UNDERSTANDING YOUR INSTRUMENT PANEL 375 • System Off Adaptive Cruise Control Ready • ACC Proximity Warning When ACC is activated but the vehicle speed setting has not been selected, the display will read “Adaptive Cruise • ACC Unavailable Warning Control Ready.” •...
Page 378 376 UNDERSTANDING YOUR INSTRUMENT PANEL • Current – This display shows the current fuel economy Fuel Economy (MPG or L/100 km) form while driving. Push and release the UP or DOWN arrow button until the Fuel Economy Menu item is highlighted in the DID. Trip Info Push and Hold the OK button to reset feature.
Page 379 UNDERSTANDING YOUR INSTRUMENT PANEL 377 Stop/Start – If Equipped Screen Setup Push and release the UP or DOWN arrow button until Push and release the UP or DOWN arrow button until the Stop/Start icon is highlighted in the DID. Push and the Screen Setup Menu displays in the DID.
Page 380 378 UNDERSTANDING YOUR INSTRUMENT PANEL • Average L/100km (or MPG) 2. Upper Right • Compass (default) • Current L/100km (or MPG) • Outside Temp • Trip A Distance • Time • Trip B Distance • Range to Empty • Audio Inform •...
Page 381: Uconnect Settings
UNDERSTANDING YOUR INSTRUMENT PANEL 379 Speed Warning — If Equipped Push and release the UP or DOWN arrow button until the Speed Warning Menu icon/ title is highlighted in the DID. Push and release OK to enter speed warning. Use UP or DOWN arrow to select a desired speed, then push and release OK to set the speed.
Page 382: Buttons On The Faceplate
380 UNDERSTANDING YOUR INSTRUMENT PANEL Buttons On The Faceplate Buttons on the faceplate are located below the Uconnect system in the center of the instrument panel. In addition, there is a Scroll/Enter control knob located on the right side of the Climate Controls in the center of the instru- ment panel.
Page 383: Buttons On The Touchscreen
UNDERSTANDING YOUR INSTRUMENT PANEL 381 Buttons On The Touchscreen When making a selection, press the button on the touch- screen to enter the desired mode. Once in the desired Buttons on the touchscreen are accessible on the mode, press and release the preferred setting and make Uconnect display.
Page 384 382 UNDERSTANDING YOUR INSTRUMENT PANEL • Display Brightness With Headlights OFF and release the “Auto” or “Manual” button on the touchscreen. Then press the arrow back button on the When in this display, you may select the overall screen touchscreen. brightness with the headlights off.
Page 385 UNDERSTANDING YOUR INSTRUMENT PANEL 383 • Units • Control Screen Time-Out — If Equipped When in this display, you may select to have the DID, When this feature is selected, the Controls Screen will odometer, and navigation system (if equipped) changed stay open for five seconds before the screen times out.
Page 386 384 UNDERSTANDING YOUR INSTRUMENT PANEL • Show Command List • Set Date When in this display, you may change the Show Com- When in this display, you may set the date manually. mand List settings. To change the Show Command List Press the “Set Date”...
Page 387 UNDERSTANDING YOUR INSTRUMENT PANEL 385 possible collision when you are much closer to the For further information, refer to “Forward Collision vehicle in front of you. To change the FCW status, press Warning (FCW) With Mitigation” in “Understanding The and release the “Near” or “Far” button. Features Of Your Vehicle”.
Page 388 386 UNDERSTANDING YOUR INSTRUMENT PANEL For further information, refer to “Lane Departure Warn- The chime volume settings include “LOW,” “MEDIUM,” ing (LDW)” in “Understanding The Features Of Your and “HIGH.” The factory default volume setting is Vehicle”. MEDIUM. • ParkSense — If Equipped •...
Page 389 UNDERSTANDING YOUR INSTRUMENT PANEL 387 • Tilt Mirrors In Reverse — If Equipped alert when the turn signal is on. When Off is selected, the Blind Spot Monitor (BSM) system is deactivated. To When this feature is selected, the exterior sideview change the Blind Spot Alert status, press the “Off,”...
Page 390 388 UNDERSTANDING YOUR INSTRUMENT PANEL • ParkView Backup Camera Fixed Guide Lines — If • Electric Park Brake Service Mode Equipped This feature provides a means for a technician or vehicle When this feature is enabled, fixed (static) grid lines are owner to utilize a vehicle integrated, menu driven sys- overlaid on the Rear Backup Camera image to illustrate tem, to command the electric park brake retraction, to...
Page 391 UNDERSTANDING YOUR INSTRUMENT PANEL 389 • Auto High Beams — If Equipped setting, press the “Headlight Off Delay” button on the touchscreen, and choose either 0 sec, 30 sec, 60 sec or 90 When this feature is selected, the high beam headlights seconds.
Page 392 390 UNDERSTANDING YOUR INSTRUMENT PANEL • Flash Lights w/Lock • Auto Unlock On Exit When this feature is selected, the exterior lights will flash When this feature is selected, all doors will unlock when when the doors are locked or unlocked with the Remote the vehicle is stopped and the transmission is in the Keyless Entry (RKE) transmitter or the Passive Entry PARK or NEUTRAL position and the driver’s door is...
Page 393 UNDERSTANDING YOUR INSTRUMENT PANEL 391 • Horn w/Lock NOTE: Passive Entry — If Equipped. If “All” is selected, all doors will unlock no matter which Passive Entry door When this feature is selected, the horn will sound when handle is grasped. If “Driver” is selected, only the driver’s the Key Fob Lock button is pressed.
Page 394 392 UNDERSTANDING YOUR INSTRUMENT PANEL • Memory Linked to Fob — If Equipped Auto Comfort Systems — If Equipped After pressing the “Auto-On Comfort & Remote Start” This feature provides automatic driver seat positioning to button on the touchscreen the following settings will be enhance driver mobility when entering and exiting the available: vehicle.
Page 395 UNDERSTANDING YOUR INSTRUMENT PANEL 393 • Easy Exit Seats — If Equipped • Headlight Off Delay When this feature is selected, the Driver’s seat will When this feature is selected, the driver can choose to automatically move rearward once the engine is shut off. have the headlights remain on for 0, 30, 60, or 90 seconds To make your selection, press the “Easy Exit Seats”...
Page 396 394 UNDERSTANDING YOUR INSTRUMENT PANEL • Compass Variance Press “Compass Variance” on the touchscreen to change this setting. You will then be able to select a compass variance of 1 through 15 per the compass variance zone map figure. Compass Variance is the difference between Magnetic North and Geographic North.
Page 397 UNDERSTANDING YOUR INSTRUMENT PANEL 395 • Balance/Fade metallic objects). A message will appear on the touch- screen when the compass has been successfully cali- This feature allows you to adjust the Balance and Fade brated. settings. Press and drag the speaker icon or use the NOTE: Keep magnetic materials away from the top of the arrows to adjust, tap the “C”...
Page 398 396 UNDERSTANDING YOUR INSTRUMENT PANEL • AUX Volume Offset — If Equipped • Paired Audio Sources This feature provides the ability to tune the audio level This feature shows which audio devices are paired to the for portable devices connected through the AUX input. Phone/Bluetooth system.
Page 399 UNDERSTANDING YOUR INSTRUMENT PANEL 397 • Subscription Information Restore Settings After pressing the “Restore Settings” button on the New vehicle purchasers or lessees will receive a free touchscreen the following settings will be available: limited time subscription to SiriusXM Satellite Radio with your radio.
Page 400: Customer Programmable Features/Personal Settings - Uconnect 8.4 Personal Settings
398 UNDERSTANDING YOUR INSTRUMENT PANEL Clear Personal Data the Uconnect system allows you to access programmable features that may be equipped such as Display, Voice, After pressing the “Clear Personal Data Settings” button Clock, Safety & Driving Assistance, Lights, Doors & on the touchscreen the following settings will be avail- Locks, Auto-On Comfort, Engine Off Options, Audio, able:...
Page 401 UNDERSTANDING YOUR INSTRUMENT PANEL 399 Display “–” setting buttons on the touchscreen or by selecting any point on the scale between the “+” and “–” buttons on the After pressing the “Display” button on the touchscreen touchscreen. the following settings will be available. NOTE: To make changes to the Display Brightness with •...
Page 402 400 UNDERSTANDING YOUR INSTRUMENT PANEL • Set Theme Press the “Touchscreen Beep” button on the touchscreen until a check-mark appears next to the setting, showing This feature will allow you to choose a background that setting has been selected. theme for the display screen. The theme will change the •...
Page 403 UNDERSTANDING YOUR INSTRUMENT PANEL 401 Voice Clock After pressing the “Voice” button on the touchscreen the After pressing the “Clock” button on the touchscreen the following settings will be available: following settings will be available: • Voice Response Length • Sync Time With GPS When in this display, you may change the Voice Re- This feature will allow the radio to sync time with a GPS sponse Length settings.
Page 404 402 UNDERSTANDING YOUR INSTRUMENT PANEL • Set Time Minutes on the touchscreen until a check-mark appears next to setting, indicating that the setting has been selected. This feature will allow you to adjust the minutes. The “Sync time with GPS” button on the touchscreen must be Safety &...
Page 405 UNDERSTANDING YOUR INSTRUMENT PANEL 403 • LaneSense Warning — If Equipped For further information, refer to “Adaptive Cruise Con- trol (ACC)” in “Understanding The Features Of Your When this feature is selected, it sets the distance at which Vehicle”. the steering wheel will provide feedback for potential •...
Page 406 404 UNDERSTANDING YOUR INSTRUMENT PANEL For further information, refer to “Lane Departure Warn- The chime volume settings include “LOW,” “MEDIUM,” ing (LDW)” in “Understanding The Features Of Your and “HIGH.” The factory default volume setting is Vehicle”. MEDIUM. • ParkSense — If Equipped •...
Page 407 UNDERSTANDING YOUR INSTRUMENT PANEL 405 • Tilt Mirrors In Reverse — If Equipped visual alert in the outside mirrors as well as an audible alert when the turn signal is on. When Off is selected, the When this feature is selected, the exterior sideview Blind Spot Monitor (BSM) system is deactivated.
Page 408 406 UNDERSTANDING YOUR INSTRUMENT PANEL center line overlay indicates the center of the vehicle to “Rain Sensing” button on the touchscreen, until a check- assist with parking or aligning to a hitch/receiver. mark appears next to setting, showing that setting has been selected.
Page 409 UNDERSTANDING YOUR INSTRUMENT PANEL 407 • Headlight Off Delay • Headlights With Wipers — If Equipped When this feature is selected, it allows adjustment of the When this feature is selected, and the headlight switch is amount of time the headlights remain on after the engine in the AUTO position, the headlights will turn on ap- is shut off.
Page 410 408 UNDERSTANDING YOUR INSTRUMENT PANEL • Daytime Running Lights — If Equipped Doors & Locks After pressing the Doors & Locks button on the touch- When this feature is selected, the headlights will turn on screen the following settings will be available. whenever the vehicle is set in motion.
Page 411 UNDERSTANDING YOUR INSTRUMENT PANEL 409 • Flash Lights With Lock • Sound Horn With Remote Start When this feature is selected, the exterior lights will flash When this feature is selected, the horn will sound when when the doors are locked or unlocked with the Remote the remote start is activated.
Page 412 410 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: If the vehicle is programmed 1st Press Of Key Fob showing that setting has been selected. Refer to “Keyless Unlocks “All Doors,” all doors will unlock no matter Enter-N-Go” in “Things To Know Before Starting Your which Passive Entry equipped door handle is grasped.
Page 413 UNDERSTANDING YOUR INSTRUMENT PANEL 411 • Power Lift Gate Chime — If Equipped Steering Wheel With Vehicle Start” button on the touch- screen, then select either “Off,” “Remote Start” or “All This feature plays an alert when the power lift gate is Starts”...
Page 414 412 UNDERSTANDING YOUR INSTRUMENT PANEL • Balance/Fade DVD video system (if equipped), power sunroof (if equipped), and power outlets will remain active for up to This feature allows you to adjust the Balance and Fade 10 minutes after the ignition is cycled to OFF. Opening settings.
Page 415 UNDERSTANDING YOUR INSTRUMENT PANEL 413 • Speed Adjusted Volume • Loudness — If Equipped This feature increases or decreases volume relative to Loudness improves sound quality at lower volumes. To vehicle speed. To change the Speed Adjusted Volume make your selection, press the “Loudness” button on the press the “Off,”...
Page 416 414 UNDERSTANDING YOUR INSTRUMENT PANEL SiriusXM Setup — If Equipped Press the “Subscription Info” button on the touchscreen to access the Subscription Information screen. After pressing the “SiriusXM Setup” button on the touch- screen, the following settings will be available: Write down the SIRIUS ID numbers for your receiver.
Page 417: Uconnect Radios - If Equipped
UNDERSTANDING YOUR INSTRUMENT PANEL 415 settings to default?” select “OK” to restore, or “Cancel” to System Information exit. Once the settings are restored, a pop-up appears After pressing the “System Information” button on the stating settings reset to default. touchscreen the following settings will be available: Clear Personal Data •...
Page 418: Media Hub - If Equipped
416 UNDERSTANDING YOUR INSTRUMENT PANEL MEDIA HUB — IF EQUIPPED Located in the front storage area, this feature allows an External USB device, SD card or AUX electronic device to be plugged into the port, slot or jack. For further information, refer to the Uconnect User’s Manual.
Page 419: Radio Operation
UNDERSTANDING YOUR INSTRUMENT PANEL 417 Pushing the center button will make the radio switch between the various modes available (AM/FM/SXM/ CD/AUX, etc.). The left-hand control is a rocker-type switch with a pushbutton in the center. The function of the left-hand control is different depending on which mode you are in.
Page 420: Cd Player
418 UNDERSTANDING YOUR INSTRUMENT PANEL CD Player CD/DVD DISC MAINTENANCE Pushing the top of the switch once will go to the next To keep a CD/DVD in good condition, take the following track on the CD. Pushing the bottom of the switch once precautions: will go to the beginning of the current track, or to the 1.
Page 421: Radio Operation And Mobile Devices
UNDERSTANDING YOUR INSTRUMENT PANEL 419 NOTE: If you experience difficulty in playing a particular Regulatory And Safety Information disc, it may be damaged (e.g., scratched, reflective coat- USA/CANADA ing removed, a hair, moisture or dew on the disc) Exposure to Radio Frequency Radiation oversized, or have protection encoding.
Page 422 420 UNDERSTANDING YOUR INSTRUMENT PANEL situations or environments, such as aboard airplanes. If NOTE: you are unsure of restrictions, you are encouraged to ask • This equipment has been tested and found to comply for authorization before turning on the wireless radio. with the limits for a Class B digital device, pursuant to This device complies with Part 15 of the FCC Rules and Part 15 of the FCC Rules.
Page 423: Climate Controls
UNDERSTANDING YOUR INSTRUMENT PANEL 421 • Consult the dealer or an experienced radio technician for help. CLIMATE CONTROLS The air conditioning and heating system is designed to make you comfortable in all types of weather. This system can be operated through either the controls on the instru- ment panel or through the Uconnect system display.
Page 424 422 UNDERSTANDING YOUR INSTRUMENT PANEL Blower Control Air Conditioning Operation There are several blower speeds. Use Push the A/C button to engage the Air Conditioning this control to regulate the amount of (A/C). An LED will illuminate when the A/C system is air forced through the system in any operating.
Page 425 UNDERSTANDING YOUR INSTRUMENT PANEL 423 Mode Control (Air Direction) Bi-Level Mode Mode control allows you to choose Air is directed through the panel and floor outlets. from several patterns of air distribu- tion. You can select either a primary NOTE: There is a difference in temperature (in any mode, as identified by the symbols, or conditions other than full cold or full hot), between the a blend of two of these modes.
Page 426 424 UNDERSTANDING YOUR INSTRUMENT PANEL windshield. This setting is good for maintaining comfort, outside odors, smoke, or dust, and to cool the interior while reducing moisture on the windshield. rapidly upon initial start-up in very hot or humid weather. Defrost Mode NOTE: Air is directed through the windshield and side •...
Page 427 UNDERSTANDING YOUR INSTRUMENT PANEL 425 • The A/C can be deselected manually without disturb- Stop/Start System — If Equipped ing the mode control selection by pushing the A/C While in an Autostop, the Climate Controls system may button. automatically adjust airflow to maintain cabin comfort. Customer settings will be maintained upon return to an Air Outlets engine running condition.
Page 428: Manual Climate Controls With Touchscreen - If Equipped
426 UNDERSTANDING YOUR INSTRUMENT PANEL • Activation By Rear Defrost The wiper de-icer activates automatically when the Rear Defrost is operating and the ambient temperature is below 33° F (0.6° C). • Activation By Remote Start Operation When the Remote Start is activated and the outside ambient temperature is less than 33°...
Page 429 UNDERSTANDING YOUR INSTRUMENT PANEL 427 Uconnect 5.0 Manual Temperature Controls — Buttons Uconnect 8.4 Manual Temperature Controls — Buttons On The Touchscreen On The Touchscreen I n f o r ma t i o n P r o v i d e d b y :...
Page 430 428 UNDERSTANDING YOUR INSTRUMENT PANEL Button Descriptions (Applies To Both The Buttons On 4. Front Defrost Button Your Faceplate And The Buttons On Your Touchscreen) Push and release to change the current airflow setting to 1. MAX A/C Button Defrost mode. The indicator illuminates when this fea- ture is ON.
Page 431 UNDERSTANDING YOUR INSTRUMENT PANEL 429 automatic mode to switch to manual operation. The CAUTION! speeds can be selected using either the blower control knob on the faceplate or buttons on the touchscreen as Failure to follow these cautions can cause damage to follows: the heating elements: •...
Page 432 430 UNDERSTANDING YOUR INSTRUMENT PANEL 7. Modes NOTE: BI-LEVEL mode is designed under comfort con- ditions to provide cooler air out of the panel outlets and The airflow distribution mode can be adjusted so air warmer air from the floor outlets. comes from the instrument panel outlets, floor outlets, •...
Page 433: Windshield Wiper De-Icer - If Equipped
UNDERSTANDING YOUR INSTRUMENT PANEL 431 8. Climate Control OFF Button 11. Temperature Control (Uconnect 5.0) Push and release this button to turn the Climate Control Press the temperature button on the touchscreen to ON/OFF. regulate the temperature of the air inside the passenger compartment.
Page 434: Dual Zone Automatic Climate Controls With Touchscreen - If Equipped
432 UNDERSTANDING YOUR INSTRUMENT PANEL • Activation By Rear Defrost The wiper de-icer activates automatically when the Rear Defrost is operating and the ambient temperature is below 33° F (0.6° C). • Activation By Remote Start Operation When the Remote Start is activated and the outside ambient temperature is less than 33°...
Page 435 UNDERSTANDING YOUR INSTRUMENT PANEL 433 Uconnect 5.0 Automatic Temperature Controls — Buttons Uconnect 8.4 Automatic Temperature Controls — Buttons On Your Touchscreen On Your Touchscreen I n f o r ma t i o n P r o v i d e d b y :...
Page 436 434 UNDERSTANDING YOUR INSTRUMENT PANEL Button Descriptions (Applies To Both The Buttons On 3. Recirculation Button Your Faceplate And The Buttons On Your Touchscreen) Press and release to change the current setting, the 1. MAX A/C Button indicator illuminates when ON. Press and release to change the current setting, the 4.
Page 437 UNDERSTANDING YOUR INSTRUMENT PANEL 435 window demist outlets. When the defrost button is CAUTION! selected, the blower level will increase. Use Defrost mode with maximum temperature settings for best windshield Failure to follow these cautions can cause damage to and side window defrosting and defogging. Performing the heating elements: •...
Page 438 436 UNDERSTANDING YOUR INSTRUMENT PANEL 7. Passenger Temperature Control Up Button (Uconnect slide the button on the touchscreen temperature bar 8.4 Only) towards the blue arrow button on the touchscreen for cooler temperature settings. Provides the passenger with independent temperature control.
Page 439 UNDERSTANDING YOUR INSTRUMENT PANEL 437 10. Blower Control Button On The Touchscreen Use the small blower icon to reduce the blower setting Blower control is used to regulate the amount of air and the large blower icon to increase the blower setting. forced through the climate system.
Page 440 438 UNDERSTANDING YOUR INSTRUMENT PANEL • Bi-Level Mode 12. Climate Control OFF Button Air comes from the instrument panel outlets and Press and release this button to turn the Climate Control floor outlets. A slight amount of air is directed ON/OFF.
Page 441: Climate Control Functions
UNDERSTANDING YOUR INSTRUMENT PANEL 439 14. Driver Temperature Control Up Button (Uconnect 8.4 Climate Control Functions Only) A/C (Air Conditioning) Provides the driver with independent temperature con- The Air Conditioning (A/C) button allows the operator trol. Push the button on the faceplate for warmer tem- to manually activate or deactivate the air conditioning perature settings or on the touchscreen, press and slide system.
Page 442 440 UNDERSTANDING YOUR INSTRUMENT PANEL dirt or insects. Clean with a gentle water spray from Recirculation behind the radiator and through the condenser. Fabric When outside air contains smoke, odors, or front fascia protectors may reduce airflow to the high humidity, or if rapid cooling is desired, condenser, reducing air conditioning performance.
Page 443: Automatic Temperature Control (Atc)
UNDERSTANDING YOUR INSTRUMENT PANEL 441 Recirculation will be disabled automatically if this mode 3. When the system is set up for your comfort level, it is is selected. Attempting to use Recirculation while in this not necessary to change the temperature. You will mode will cause the LED in the control button to blink experience the greatest efficiency by simply allowing and then turn off.
Page 444: Operating Tips
442 UNDERSTANDING YOUR INSTRUMENT PANEL Manual Operation Override Operating Tips The system allows for manual selection of blower speed, NOTE: Refer to the chart at the end of this section for air distribution mode, A/C status and recirculation con- suggested control settings for various weather condi- trol.
Page 445 UNDERSTANDING YOUR INSTRUMENT PANEL 443 Vacation Storage NOTE: • Recirculate without A/C should not be used for long Any time you store your vehicle or keep it out of service (i.e., vacation) for two weeks or more, run the air periods, as fogging may occur.
Page 446 444 UNDERSTANDING YOUR INSTRUMENT PANEL The windshield wiper de-icer operates automatically Outside Air Intake once the following conditions are met: Make sure the air intake, located directly in front of the • Activation By Front Defrost windshield, is free of obstructions such as leaves. Leaves collected in the air intake may reduce airflow, and if they The wiper de-icer activates automatically during a cold enter the plenum, they could plug the water drains.
Page 447 UNDERSTANDING YOUR INSTRUMENT PANEL 445 Control Setting Suggestions For Various Weather Conditions I n f o r ma t i o n P r o v i d e d b y :...
Page 448: Personalized Menu Bar
446 UNDERSTANDING YOUR INSTRUMENT PANEL PERSONALIZED MENU BAR 1. Press the “Apps ” button to open the App screen. The Uconnect features and services in the main menu bar 2. Press and hold, then drag the selected App to replace are easily changed for your convenience.
Page 449: Get Started
UNDERSTANDING YOUR INSTRUMENT PANEL 447 Uconnect 5.0 Uconnect 8.4AN Key Features: If you see the icon on your touchscreen, you have the Uconnect 8.4AN system. If not, you have a • 5” touchscreen Uconnect 8.4A system. • Three buttons on either side of the display Get Started All you need to control your Uconnect system with your voice are the buttons on your steering wheel.
Page 450 448 UNDERSTANDING YOUR INSTRUMENT PANEL 1. Visit UconnectPhone.com to check mobile device and feature compatibility and to find phone pairing instructions. 2. Reduce background noise. Wind and passenger con- versations are examples of noise that may impact recognition. 3. Speak clearly at a normal pace and volume while facing straight ahead.
Page 451: Basic Voice Commands
UNDERSTANDING YOUR INSTRUMENT PANEL 449 Basic Voice Commands The basic Voice Commands below can be given at any point while using your Uconnect system. Push the VR button . After the beep, say • Cancel to stop a current voice session •...
Page 452: Radio
450 UNDERSTANDING YOUR INSTRUMENT PANEL Push the VR button . After the beep, say • Tune to ninety-five-point-five FM • Tune to Satellite Channel Hits 1 TIP: At any time, if you are not sure of what to say or want to learn a Voice Command, push the VR button and say “Help.”...
Page 453: Media
UNDERSTANDING YOUR INSTRUMENT PANEL 451 Uconnect 5.0 Radio Uconnect 8.4A/8.4AN Radio Media Uconnect offers connections via USB, SD, Bluetooth and auxiliary ports (If Equipped). Voice operation is only available for connected USB and AUX devices. (Remote CD player optional and not available on all vehicles.) I n f o r ma t i o n P r o v i d e d b y :...
Page 454 452 UNDERSTANDING YOUR INSTRUMENT PANEL Push the VR button . After the beep, say one of the following commands and follow the prompts to switch your media source or choose an artist. • Change source to Bluetooth • Change source to AUX •...
Page 455: Phone
UNDERSTANDING YOUR INSTRUMENT PANEL 453 Push the Phone button . After the beep, say one of the following commands • Call John Smith • Dial 123-456-7890 and follow the system prompts • Redial (call previous outgoing phone number) • Call back (call previous incoming phone number) TIP: When providing a Voice Command, push the Phone button and say “Call,”...
Page 456 454 UNDERSTANDING YOUR INSTRUMENT PANEL Uconnect 5.0 Phone Uconnect 8.4A/8.4AN Phone I n f o r ma t i o n P r o v i d e d b y :...
Page 457: Voice Text Reply
UNDERSTANDING YOUR INSTRUMENT PANEL 455 Voice Text Reply PRE-DEFINED VOICE TEXT REPLY RESPONSES Uconnect will announce incoming text messages. Push Yes. Stuck in traffic. See you later. the Phone button and say Listen. (Must have com- Start without I’ll be late. patible mobile phone paired to Uconnect system.) Okay.
Page 458 456 UNDERSTANDING YOUR INSTRUMENT PANEL Apple iPhone iOS 6 or later supports reading incoming text messages only. To enable this feature on your Apple iPhone, follow these 4 simple steps: iPhone Notification Settings 1 — Select “Settings” 2 — Select “Bluetooth” 3 —...
Page 459: Climate (8.4A/8.4An)
UNDERSTANDING YOUR INSTRUMENT PANEL 457 TIP: Voice Text Reply is not compatible with iPhone, but if your vehicle is equipped with Siri Eyes Free, you can use your voice to send a text message. Climate (8.4A/8.4AN) Too hot? Too cold? Adjust vehicle temperatures hands- free and keep everyone comfortable while you keep moving ahead.
Page 460 458 UNDERSTANDING YOUR INSTRUMENT PANEL 1. To enter a destination, push the VR button . After the beep, say: • For the 8.4A Uconnect System, say: “Enter state.” • For the 8.4AN Uconnect System, say: “Find address 800 Chrysler Drive Auburn Hills, Michigan.” 2.
Page 461: Uconnect Access (8.4A/8.4An)
UNDERSTANDING YOUR INSTRUMENT PANEL 459 Uconnect Access (8.4A/8.4AN) NOTE: Uconnect Access is available only on equipped vehicles purchased within the continental United States, Alaska and Hawaii. Services can only be used where WARNING! coverage is available; see coverage map for details. ALWAYS obey traffic laws and pay attention to the 9-1-1 Call road.
Page 462: Understanding Your Instrument Panel
460 UNDERSTANDING YOUR INSTRUMENT PANEL Register (8.4A/8.4AN) 3. A helpful Uconnect Care Agent will register your vehicle and handle all of the details. To unlock the full potential of Uconnect Access in your vehicle, you first need to register with Uconnect Access. Signing up is easy! Simply follow the steps above.
Page 463 UNDERSTANDING YOUR INSTRUMENT PANEL 461 3. Press the app you’d like to connect to your vehicle. 4. Enter your login information for the selected app and press Link. 5. Next time you’re in your vehicle, enable Bluetooth, pair your phone and select the Via Mobile app you want to play from the Uconnect touchscreen to stream your personalized music.
Page 464: Voice Texting (8.4A/8.4An)
462 UNDERSTANDING YOUR INSTRUMENT PANEL Voice Texting (8.4A/8.4AN) You must be registered with Uconnect Access and have a compatible MAP – enabled smartphone to use your voice 1. To send a message, push the Phone button . After to send a personalized text message. For details about the beep, say the following command: “Send mes- MAP, visit UconnectPhone.com.
Page 465: Yelp (8.4A/8.4An)
UNDERSTANDING YOUR INSTRUMENT PANEL 463 TIP: • Voice Texting is not compatible with iPhone, but if your vehicle is equipped with Siri Eyes Free, you can use your voice to send a text message. • Messages are limited to 140 characters. •...
Page 466: Siriusxm Travel Link (8.4A/8.4An)
464 UNDERSTANDING YOUR INSTRUMENT PANEL 3. Once the YELP home screen appears on the touchscreen, push the VR button , then say: “YELP search.” 4. Listen to the system prompts and after the beep, tell Uconnect the place or business that you’d like Uconnect to find.
Page 467: Siri Eyes Free - If Equipped
UNDERSTANDING YOUR INSTRUMENT PANEL 465 Push the VR button . After the beep, say one of the following commands: • Show fuel prices • Show 5 - day weather forecast • Show extended weather TIP: Traffic alerts are not accessible with Voice Com- mand.
Page 468: Do Not Disturb
466 UNDERSTANDING YOUR INSTRUMENT PANEL Do Not Disturb While in Do Not Disturb, Conference Call can be selected so you can still place a second call without being inter- With Do Not Disturb, you can disable notifications from rupted by incoming calls. incoming calls and texts, allowing you to keep your eyes on the road and hands on the wheel.
Page 469: Additional Information
UNDERSTANDING YOUR INSTRUMENT PANEL 467 NOTE: Uconnect System Support: • The transmitter has been tested and it complies with • U.S. residents call 1-877-855-8400 (24 hours a day 7 FCC and IC rules. Changes or modifications not ex- days a week) or visit DriveUconnect.com pressly approved by the party responsible for compli- •...
Page 470 I n f o r ma t i o n P r o v i d e d b y :...
Page 471: Starting And Operating
STARTING AND OPERATING CONTENTS ▫ Possible Reasons The Engine Does Not STARTING PROCEDURES ....474 Autostop ......478 ▫...
Page 472 470 STARTING AND OPERATING ▫ Brake/Transmission Shift Interlock System . . .485 ON-ROAD DRIVING TIPS ....506 ▫ Nine-Speed Automatic Transmission ..485 OFF-ROAD DRIVING TIPS .
Page 473 STARTING AND OPERATING 471 ▫ Rainy Brake Support (RBS) ....533 BRAKE SYSTEM ..... . .519 ▫...
Page 474 472 STARTING AND OPERATING ▫ Radial Ply Tires ..... .555 FUEL REQUIREMENTS ....577 ▫...
Page 475 STARTING AND OPERATING 473 ▫ Selection Of Engine Oil For Flexible Fuel ▫ Trailer Hitch Classification ....594 Vehicles (E-85) And Gasoline Vehicles ..583 ▫...
Page 476: Starting Procedures
474 STARTING AND OPERATING STARTING PROCEDURES WARNING! (Continued) Before starting your vehicle, adjust your seat, adjust both • Allowing children to be in a vehicle unattended is inside and outside mirrors, and fasten your seat belts. dangerous for a number of reasons. A child or others could be seriously or fatally injured.
Page 477: Normal Starting
STARTING AND OPERATING 475 Normal Starting Extreme Cold Weather (Below –22°F Or −30°C) To ensure reliable starting at these temperatures, use of NOTE: Normal starting of either a cold or a warm engine an externally powered electric engine block heater (avail- is obtained without pumping or pressing the accelerator able from your authorized dealer) is recommended.
Page 478: If Engine Fails To Start
476 STARTING AND OPERATING 4. If the engine fails to start after eight attempts, allow WARNING! (Continued) the starter to cool for at least 10 minutes, then repeat • Do not attempt to push or tow your vehicle to get it the procedure.
Page 479: After Starting
STARTING AND OPERATING 477 With Tip Start CAUTION! If the engine fails to start after you have followed the To prevent damage to the starter, wait 10 to 15 Normal Starting , “Extreme Cold Weather and Ex- seconds before trying again. tended Park Starting procedures, it may be flooded.
Page 480: Possible Reasons The Engine Does Not Autostop
478 STARTING AND OPERATING into STOP/START READY and if all other conditions are The engine will shut down, the tachometer will move to met, can go into a STOP/START AUTOSTOP ACTIVE the zero position and the Stop/Start telltale will illumi- “Autostop”...
Page 481: To Start The Engine While In Autostop Mode
STARTING AND OPERATING 479 • The vehicle is on a steep grade. • Engine temp too high. • Cabin heating or cooling is in process and an accept- • 5 MPH threshold not achieved from previous AU- able cabin temperature has not been achieved. TOSTOP.
Page 482 480 STARTING AND OPERATING Conditions That Will Cause The Engine To Start Auto- Conditions That Force An Application Of The Electric matically While In Autostop Mode: Park Brake While In Autostop Mode: • The transmission selector is moved out of DRIVE. •...
Page 483: To Manually Turn Off The Stop/Start System
STARTING AND OPERATING 481 To Manually Turn Off The Stop/Start System Vehicle Information Center (EVIC)” or “Driver Infor- mation Display (DID)” in “Understanding Your In- 1. Push the STOP/START Off switch (located on the strument Panel” for further information. switch bank). The light on the switch will illuminate. 3.
Page 484: Engine Block Heater - If Equipped
482 STARTING AND OPERATING Information Center (EVIC)” or “Driver Information Dis- The engine block heater cord is routed under the hood, play (DID)“ in “Understanding Your Instrument Panel” behind to the driver’s side headlamp. Follow the steps for further information. below to properly use the engine block heater: If the “SERVICE STOP/START SYSTEM”...
Page 485: Automatic Transmission
STARTING AND OPERATING 483 • The engine block heater will require 110 Volts AC and WARNING! (Continued) 6.5 Amps to activate the heater element. your foot is not firmly pressing the brake pedal, the • The engine block heater must be plugged in at least vehicle could accelerate quickly forward or in re- one hour to have an adequate warming effect on the verse.
Page 486: Key Ignition Park Interlock
484 STARTING AND OPERATING WARNING! (Continued) CAUTION! • When leaving the vehicle, always make sure the Damage to the transmission may occur if the follow- ignition is in the OFF position/mode, remove the ing precautions are not observed: Key Fob from the vehicle, and lock the vehicle. •...
Page 487: Brake/Transmission Shift Interlock System
STARTING AND OPERATING 485 removed from the ignition when the ignition is in the Nine-Speed Automatic Transmission LOCK/OFF position, and the transmission is locked in The transmission gear range (PRND) is displayed both PARK whenever the ignition switch is in the LOCK/OFF beside the shift lever and in the Electronic Vehicle Infor- position.
Page 488 486 STARTING AND OPERATING The nine-speed transmission has been developed to meet DRIVE position) activates ERS mode, displays the cur- the needs of FCA current and future lineup of FWD/ rent gear in the instrument cluster, and prevents auto- AWD vehicles. Software and calibration is refined to matic upshifts beyond this gear.
Page 489: Gear Ranges
STARTING AND OPERATING 487 NOTE: After selecting any gear range, wait a moment to allow the selected gear to engage before accelerating. This is especially important when the engine is cold. PARK (P) This range supplements the parking brake by locking the transmission.
Page 490 488 STARTING AND OPERATING to move the shift lever out of PARK. As an added precau- WARNING! (Continued) tion, turn the front wheels toward the curb on a downhill vehicle could accelerate quickly forward or in re- grade and away from the curb on an uphill grade. verse.
Page 491 STARTING AND OPERATING 489 WARNING! (Continued) WARNING! (Continued) • When leaving the vehicle, always make sure the Keyless Enter-N-Go in the ACC or ON/RUN posi- ignition is in the OFF position, remove the key fob tion. A child could operate power windows, other from the vehicle and lock the vehicle.
Page 492 490 STARTING AND OPERATING The following indicators should be used to ensure that NEUTRAL (N) you have engaged the transmission into the PARK posi- Use this range when the vehicle is standing for prolonged tion: periods with the engine running. The engine may be •...
Page 493 STARTING AND OPERATING 491 while towing a heavy trailer), use the Electronic Range CAUTION! Select (ERS) shift control (refer to Electronic Range Select (ERS) Operation in this section for further information) Towing the vehicle, coasting, or driving for any other to select a lower gear range.
Page 494 492 STARTING AND OPERATING During cold temperatures, transmission operation may Transmission Limp Home Mode be modified depending on engine and transmission Transmission function is monitored electronically for temperature as well as vehicle speed. This feature im- abnormal conditions. If a condition is detected that could proves warm up time of the engine and transmission to result in transmission damage, Transmission Limp Home achieve maximum efficiency.
Page 495 STARTING AND OPERATING 493 4. Wait approximately 10 seconds. You can switch between DRIVE and ERS mode at any vehicle speed. When the shift lever is in the DRIVE 5. Restart the engine. position, the transmission will operate automatically, 6. Shift into the desired gear range. If the problem is no shifting between all available gears.
Page 496: Four-Wheel Drive Operation
494 STARTING AND OPERATING NOTE: To select the proper gear position for maximum NOTE: The torque converter clutch will not engage until deceleration (engine braking), move the shift lever into the transmission fluid is warm (usually after 1 to 3 miles the ERS position, then simply press and hold it forward [2 to 5 km] of driving).
Page 497 STARTING AND OPERATING 495 Additionally, on dry pavement under heavy throttle input (where one may have no wheel spin), torque will be sent to the rear in a pre-emptive effort to improve vehicle launch and performance characteristics. CAUTION! All wheels must have the same size and type tires. Unequal tire sizes must not be used.
Page 498: 2-Speed Four-Wheel Drive (4X4) - If Equipped
496 STARTING AND OPERATING 2-Speed Four-Wheel Drive (4X4) — If Equipped 2-Speed 4x4 Switch (with Rear Lock) The Four-Wheel Drive is fully automatic in the normal 2-Speed 4x4 Switch driving mode. The Selec-Terrain buttons provide three selectable mode positions: • 4WD LOW •...
Page 499: Shift Positions
STARTING AND OPERATING 497 When additional traction is required, the 4WD LOW Because four-wheel drive provides improved traction, range position can be used to provide an additional gear there is a tendency to exceed safe turning and stopping reduction which allows for increased torque to be deliv- speeds.
Page 500: Shifting Procedures
498 STARTING AND OPERATING while providing maximum pulling power for loose, WARNING! slippery road surfaces only. Do not exceed 25 mph (40 km/h). You or others could be injured or killed if you leave the vehicle unattended with the power transfer unit NOTE: Refer to “Selec-Terrain –...
Page 501 STARTING AND OPERATING 499 NOTE: If shift conditions/interlocks are not met a mes- sage will flash from the Electronic Vehicle Information Center (EVIC)/Driver Information Display (DID) with instructions on how to complete the requested shift. Refer to “Electronic Vehicle Information Center (EVIC)/ Driver Information Display (DID) in “Understanding Your Instrument Panel”...
Page 502 500 STARTING AND OPERATING NOTE: NEUTRAL Shift Procedure • If shift conditions/interlocks are not met, a message will WARNING! flash from the Electronic Vehicle Information Center (EVIC)/Driver Information Display (DID) with instruc- You or others could be injured or killed if you leave tions on how to complete the requested shift.
Page 503 STARTING AND OPERATING 501 3. Turn the ignition switch to the ON/RUN position, but do not start the engine. 4. Press and hold the brake pedal. 5. Shift the transmission into NEUTRAL. 6. Using a ballpoint pen or similar object, press and hold the recessed power transfer unit NEUTRAL (N) button (located by the selector switch) for four seconds.
Page 504: Rear Electronic Locker (E-Locker) System - If Equipped
502 STARTING AND OPERATING 10. Release the brake pedal for five seconds and ensure Activating The Rear E-Locker that there is no vehicle movement. To activate the Rear E-Locker System, the following conditions must be met: 11. Shift the transmission to NEUTRAL. 1.
Page 505 STARTING AND OPERATING 503 • Shifting into or out of Rear E-Locker is possible with 2. The ignition switch in the ON position and the engine running. the vehicle completely stopped; however, difficulty may occur due to the mating clutch teeth not being 3.
Page 506: Selec-Terrain
504 STARTING AND OPERATING SELEC-TERRAIN Description Selec-Terrain combines the capabilities of the vehicle control systems, along with driver input, to provide the best performance for all terrains. Rotate the Selec-Terrain knob to select the desired mode. Selec-Terrain Switch Selec-Terrain offers the following modes: •...
Page 507 STARTING AND OPERATING 505 • Snow — Tuning set for additional stability in inclem- • Rock — Off-road calibration only available in 4WD ent weather. Use on and off road on loose traction LOW range. Traction based tuning with improved surfaces such as snow.
Page 508: On-Road Driving Tips
506 STARTING AND OPERATING Electronic Vehicle Information Center conventional two-wheel drive vehicles any more than (EVIC)/Driver Information Display (DID) Display low-slung sports cars are designed to perform satisfacto- Messages rily in off-road conditions. If at all possible, avoid sharp turns or abrupt maneuvers. As with other vehicles of this When the appropriate conditions exist, a message will type, failure to operate this vehicle correctly may result in appear in the EVIC/DID display.
Page 509: Driving Through Water
STARTING AND OPERATING 507 Driving Through Water entering. Proceed with caution and maintain a steady controlled speed less than 5 mph (8 km/h) in deep water Although your vehicle is capable of driving through to minimize wave effects. water, there are a number of precautions that must be considered before entering the water: Flowing Water If the water is swift flowing and rising (as in storm...
Page 510: Driving In Snow, Mud And Sand
508 STARTING AND OPERATING Maintenance Avoid abrupt downshifts on icy or slippery roads be- cause engine braking may cause skidding and loss of After driving through deep water, inspect your vehicle control. fluids and lubricants (engine, transmission, Power Trans- fer Unit and Rear Drive Module) to assure they have not Hill Climbing been contaminated.
Page 511: Traction Downhill
STARTING AND OPERATING 509 Traction Downhill WARNING! Shift the transmission into a low gear and the 4WD If the engine stalls or you lose headway or cannot System to 4WD LOW range or Select Hill Descent make it to the top of a steep hill or grade, never Control if equipped (refer to Electronic Brake Control attempt to turn around.
Page 512: Power Steering
510 STARTING AND OPERATING • Completely inspect the underbody of your vehicle. WARNING! Check tires, body structure, steering, suspension, and exhaust system for damage. Abrasive material in any part of the brakes may cause excessive wear or unpredictable braking. You might •...
Page 513 STARTING AND OPERATING 511 light efforts while parking and good feel while driving. If (EVIC) or Driver Information Display (DID)” in “Under- the electric steering system experiences a fault that standing Your Instrument Panel” for further information. reduces assist or prevents the vehicle from providing If the “POWER STEERING SYSTEM HOT - PERFOR- assist, you will still have the ability to steer the vehicle MANCE MAY BE LIMITED”...
Page 514: Electric Park Brake (Epb)
512 STARTING AND OPERATING NOTE: The parking brake is primarily intended to prevent the vehicle from rolling while parked. Before leaving the • Even if the power steering assistance is no longer vehicle, make sure that the park brake is applied. Also, be operational, it is still possible to steer the vehicle.
Page 515 STARTING AND OPERATING 513 pedal while you apply the park brake, you may notice a small amount of brake pedal movement. The park brake can be applied even when the ignition switch is OFF but the BRAKE warning lamp will not illuminate, however, it can only be released when the ignition switch is in the ON/RUN position.
Page 516 514 STARTING AND OPERATING The park brake will release automatically when the NOTE: When parking on a hill, it is important to turn the ignition switch is ON, the transmission is in DRIVE or front wheels toward the curb on a downhill grade and REVERSE, the driver seat belt is buckled, and an attempt away from the curb on an uphill grade.
Page 517 STARTING AND OPERATING 515 WARNING! (Continued) WARNING! (Continued) • Never leave children alone in a vehicle, or with • Always fully apply the parking brake when leav- access to an unlocked vehicle. Allowing children to ing your vehicle, or it may roll and cause damage or be in a vehicle unattended is dangerous for a injury.
Page 518: Auto Park Brake
516 STARTING AND OPERATING will sound. The rear stop lamps will also be illuminated flashing. In this event, urgent service of the electric park automatically while the vehicle remains in motion. brake system is required. Do not rely on the parking brake to hold the vehicle stationary.
Page 519: Safehold
STARTING AND OPERATING 517 • There is no attempt to depress the brake pedal or SafeHold accelerator pedal. SafeHold is a safety feature of the Electric Park Brake • The clutch pedal is not pressed. System that will engage the park brake automatically if the vehicle is left unsecured while the ignition switch is •...
Page 520 518 STARTING AND OPERATING When servicing your rear brakes, it may be necessary for When brake service work is complete, the following steps you or your technician to push the rear piston into the must be followed to reset the park brake system to rear caliper bore.
Page 521: Brake System
STARTING AND OPERATING 519 BRAKE SYSTEM WARNING! Your vehicle is equipped with dual hydraulic • Riding the brakes can lead to brake failure and brake systems. If either of the two hydraulic possibly a collision. Driving with your foot resting systems loses normal capability, the remaining or riding on the brake pedal can result in abnor- system will still function.
Page 522: Electronic Brake Control System
520 STARTING AND OPERATING ELECTRONIC BRAKE CONTROL SYSTEM overslip of the rear wheels to avoid vehicle instability, and to prevent the rear axle from entering ABS before the Your vehicle is equipped with an advanced Electronic front axle. Brake Control system (EBC). This system includes Elec- tronic Brake Force Distribution (EBD), Anti-Lock Brake Brake System Warning Light System (ABS), Brake Assist System (BAS), Hill Start...
Page 523 STARTING AND OPERATING 521 braking conditions. The system automatically prevents These are all normal characteristics of ABS. wheel lock, and enhances vehicle control during braking. WARNING! The ABS performs a self-check cycle to ensure that the ABS is working properly each time the vehicle is started •...
Page 524: Anti-Lock Brake Warning Light
522 STARTING AND OPERATING If the “Anti-Lock Brake Warning Light” remains on or WARNING! (Continued) comes on while driving, it indicates that the anti-lock braking or steering efficiency beyond that afforded portion of the brake system is not functioning and that by the condition of the vehicle brakes and tires or service is required.
Page 525: Hill Start Assist (Hsa)
STARTING AND OPERATING 523 reduce braking distances. The BAS complements the WARNING! (Continued) anti-lock brake system (ABS). Applying the brakes very must never be exploited in a reckless or dangerous quickly results in the best BAS assistance. To receive the manner, which could jeopardize the user’s safety or benefit of the system, you must apply continuous brak- the safety of others.
Page 526 524 STARTING AND OPERATING • Park brake must be off. WARNING! (Continued) • Driver door must be closed. such as on minor hills or with a loaded vehicle, or while pulling a trailer. HSA is not a substitute for • The vehicle must be on a sufficient grade. active driving involvement.
Page 527 STARTING AND OPERATING 525 Disabling And Enabling HSA WARNING! This feature can be turned on or turned off. To change the • If you use a trailer brake controller with your current setting, proceed as follows: trailer, the trailer brakes may be activated and •...
Page 528: Traction Control System (Tcs)
526 STARTING AND OPERATING 2. Shift the transmission into PARK. 9. Repeat these steps if you want to return this feature to its previous setting. 3. Apply the parking brake. Traction Control System (TCS) 4. Start the engine. This system monitors the amount of wheel spin of each of 5.
Page 529: Electronic Stability Control (Esc)
STARTING AND OPERATING 527 Electronic Stability Control (ESC) The “ESC Activation/Malfunction Indicator Light” lo- cated in the instrument cluster will start to flash as soon This system enhances directional control and stability of as the ESC system becomes active. The “ESC Activation/ the vehicle under various driving conditions.
Page 530 528 STARTING AND OPERATING WARNING! (Continued) WARNING! (Continued) ESC performance. Improperly inflated and un- hydroplaning. ESC also cannot prevent accidents evenly worn tires may also degrade ESC perfor- resulting from loss of vehicle control due to inap- mance. Any vehicle modification or poor vehicle propriate driver input for the conditions.
Page 531 STARTING AND OPERATING 529 Partial Off NOTE: • When in “Partial Off” mode, the TCS functionality of The “Partial Off” mode is intended for times when a more spirited driving experience is desired. This mode ESC, (except for the limited slip feature described in may modify TCS and ESC thresholds for activation, the TCS section), has been disabled and the “ESC Off which allows for more wheel spin than normally al-...
Page 532 530 STARTING AND OPERATING the “ESC Off Indicator Light” will illuminate, and the WARNING! (Continued) “ESC OFF” message will display in the Electronic Vehicle evasive maneuver, the ESC system will not engage Information Center (EVIC). To turn ESC ON again, to assist in maintaining stability.
Page 533 STARTING AND OPERATING 531 Light” comes on continuously with the engine running, a NOTE: malfunction has been detected in the ESC system. If this • The “ESC Activation/Malfunction Indicator Light” light remains on after several ignition cycles, and the and the “ESC OFF Indicator Light” come on momen- vehicle has been driven several miles (kilometers) at tarily each time the ignition switch is turned ON.
Page 534: Electronic Roll Mitigation (Erm)
532 STARTING AND OPERATING Electronic Roll Mitigation (ERM) WARNING! This system anticipates the potential for wheel lift by Many factors, such as vehicle loading, road condi- monitoring the driver’s steering wheel input and the tions and driving conditions, influence the chance speed of the vehicle.
Page 535: Ready Alert Braking (Rab)
STARTING AND OPERATING 533 follow the trailer tongue weight recommendations. Refer occur by monitoring how fast the throttle is released by to “Trailer Towing” in this section for further informa- the driver. The EBC will prepare the brake system for a tion.
Page 536: Hill Descent Control (Hdc) - If Equipped
534 STARTING AND OPERATING vehicle stability. The only notification the driver receives HDC has three states: that the feature is active is the torque applied to the 1. Off (feature is not enabled and will not activate). steering wheel. 2. Enabled (feature is enabled and ready but activation NOTE: The DST feature is only meant to help the driver conditions are not met, or driver is actively overriding realize the correct course of action through small torques...
Page 537 STARTING AND OPERATING 535 • 4th = 2.5 mph (4 km/h) Activating HDC • 5th = 3.1 mph (5 km/h) Once HDC is enabled it will activate automatically if driven down a grade of sufficient magnitude. The set • 6th = 3.7 mph (6 km/h) speed for HDC is selectable by the driver, and can be •...
Page 538 536 STARTING AND OPERATING • The parking brake is applied. Deactivating HDC • Driver door opens. HDC will be deactivated but remain available if any of the following conditions occur: • The vehicle is driven greater than 20 mph (32 km/h) •...
Page 539: Selec Speed Control (Ssc) - If Equipped
STARTING AND OPERATING 537 • The cluster icon and switch lamp will flash for several Selec Speed Control (SSC) — If Equipped seconds then extinguish when the driver pushes the SSC is intended for off road driving in 4WD Low Range HDC switch but enable conditions are not met.
Page 540 538 STARTING AND OPERATING • Vehicle speed is below 5 mph (8 km/h) and the level of set speed reduction depends on the magnitude of grade. The following summarizes the SSC • Parking brake is released. set speeds: • Driver door is closed. SSC Target Set Speeds •...
Page 541 STARTING AND OPERATING 539 • NEUTRAL = 1.2 mph (2 km/h) Deactivating SSC • PARK = SSC remains enabled but not active SSC will be deactivated but remain available if any of the following conditions occur: NOTE: • Driver overrides SSC set speed with throttle or brake •...
Page 542 540 STARTING AND OPERATING • The vehicle is driven greater than 20 mph (32 km/h) • The cluster icon and switch lamp will flash for several for greater than 70 seconds. seconds then extinguish when SSC disables due to excess speed. •...
Page 543: Tire Safety Information
STARTING AND OPERATING 541 TIRE SAFETY INFORMATION NOTE: • P (Passenger) — Metric tire sizing is based on U.S. Tire Markings design standards. P-Metric tires have the letter “P” molded into the sidewall preceding the size designa- tion. Example: P215/65R15 95H. •...
Page 544 542 STARTING AND OPERATING • Temporary spare tires are designed for temporary • High flotation tire sizing is based on U.S. design emergency use only. Temporary high pressure com- standards and it begins with the tire diameter molded pact spare tires have the letter “T” or “S” molded into into the sidewall.
Page 545 STARTING AND OPERATING 543 EXAMPLE: R = Construction code – R means radial construction, or – D means diagonal or bias construction 15, 16, 18 = Rim diameter in inches (in) Service Description: 95 = Load Index – A numerical code associated with the maximum load a tire can carry H = Speed Symbol –...
Page 546: Tire Identification Number (Tin)
544 STARTING AND OPERATING EXAMPLE: Load Identification: Absence of the following load identification symbols on the sidewall of the tire indicates a Standard Load (SL) tire: • XL = Extra load (or reinforced) tire, or • LL = Light load tire or •...
Page 547 STARTING AND OPERATING 545 EXAMPLE: DOT MA L9 ABCD 0301 DOT = Department of Transportation – This symbol certifies that the tire is in compliance with the U.S. Department of Transportation tire safety standards and is approved for highway use MA = Code representing the tire manufacturing location (two digits) L9 = Code representing the tire size (two digits) ABCD = Code used by the tire manufacturer (one to four digits)
Page 548: Tire Terminology And Definitions
546 STARTING AND OPERATING Tire Terminology And Definitions Term Definition B-Pillar The vehicle B-Pillar is the structural member of the body located behind the front door. Cold Tire Inflation Pressure Cold tire inflation pressure is defined as the tire pressure after the vehicle has not been driven for at least three hours, or driven less than 1 mile (1.6 km) after sitting for a minimum of three hours.
Page 549: Tire Loading And Tire Pressure
STARTING AND OPERATING 547 Tire Loading And Tire Pressure Tire And Loading Information Placard Location NOTE: The proper cold tire inflation pressure is listed on the driver’s side B-Pillar or the rear edge of the driver’s side door. Example Tire Placard Location (Door) I n f o r ma t i o n P r o v i d e d b y :...
Page 550 548 STARTING AND OPERATING Tire And Loading Information Placard Example Tire Placard Location (B-Pillar) Tire And Loading Information Placard This placard tells you important information about the: 1. Number of people that can be carried in the vehicle. 2. Total weight your vehicle can carry. 3.
Page 551 STARTING AND OPERATING 549 4. Cold tire inflation pressures for the front, rear, and To determine the maximum loading conditions of your spare tires. vehicle, locate the statement “The combined weight of occupants and cargo should never exceed XXX lbs or Loading XXX kg”...
Page 552 550 STARTING AND OPERATING 4. The resulting figure equals the available amount of NOTE: cargo and luggage load capacity. For example, if • If your vehicle will be towing a trailer, load from your “XXX” amount equals 1,400 lbs (635 kg) and there will trailer will be transferred to your vehicle.
Page 553 STARTING AND OPERATING 551 I n f o r ma t i o n P r o v i d e d b y :...
Page 554: Tires - General Information
552 STARTING AND OPERATING Safety WARNING! WARNING! Overloading of your tires is dangerous. Overloading can cause tire failure, affect vehicle handling, and • Improperly inflated tires are dangerous and can increase your stopping distance. Use tires of the cause collisions. recommended load capacity for your vehicle.
Page 555: Tire Inflation Pressures
STARTING AND OPERATING 553 Fuel Economy WARNING! (Continued) Underinflated tires will increase tire rolling resistance • Unequal tire pressures from one side of the vehicle resulting in higher fuel consumption. to the other can cause the vehicle to drift to the right or left.
Page 556 554 STARTING AND OPERATING At least once a month: mile (1.6 km) after sitting for a minimum of three hours. The cold tire inflation pressure must not exceed the • Check and adjust tire pressure with a good quality maximum inflation pressure molded into the tire side- pocket-type pressure gauge.
Page 557: Tire Pressures For High Speed Operation
STARTING AND OPERATING 555 Tire pressure may increase from 2 to 6 psi (13 to 40 kPa) WARNING! during operation. DO NOT reduce this normal pressure build up or your tire pressure will be too low. High speed driving with your vehicle under maxi- mum load is dangerous.
Page 558: Tire Types
556 STARTING AND OPERATING Tire Repair Tire Types If your tire becomes damaged, it may be repaired if it All Season Tires — If Equipped meets the following criteria: All Season tires provide traction for all seasons (Spring, • The tire has not been driven on when flat. Summer, Fall and Winter).
Page 559 STARTING AND OPERATING 557 Summer tires do not contain the all season designation or Snow Tires mountain/snowflake symbol on the tire sidewall. Use Some areas of the country require the use of snow tires Summer tires only in sets of four; failure to do so may during the Winter.
Page 560: Run Flat Tires - If Equipped
558 STARTING AND OPERATING While studded tires improve performance on ice, skid See the tire pressure monitoring section for more infor- and traction capability on wet or dry surfaces may be mation. poorer than that of non-studded tires. Some states pro- Spare Tires —...
Page 561 STARTING AND OPERATING 559 Spare Tire Matching Original Equipped Tire And T, S = Temporary Spare Tire Wheel — If Equipped Since this tire has limited tread life, the original equip- Your vehicle may be equipped with a spare tire and ment tire should be repaired (or replaced) and reinstalled wheel equivalent in look and function to the original on your vehicle at the first opportunity.
Page 562 560 STARTING AND OPERATING limited-use spare wheel. This label contains the driving WARNING! (Continued) limitations for this spare. This tire may look like the replaced. Be sure to follow the warnings, which original equipped tire on the front or rear axle of your apply to your spare.
Page 563: Tire Spinning
STARTING AND OPERATING 561 WARNING! (Continued) WARNING! driver’s side door. Replace (or repair) the original Fast spinning tires can be dangerous. Forces gener- equipment tire at the first opportunity and reinstall it ated by excessive wheel speeds may cause tire dam- on your vehicle.
Page 564: Life Of Tire
562 STARTING AND OPERATING worn to the tread wear indicators, the tire should be replaced. Refer to “Replacement Tires” in this section for further information. Life Of Tire The service life of a tire is dependent upon varying factors including, but not limited to: •...
Page 565: Replacement Tires
STARTING AND OPERATING 563 Information placard or the Vehicle Certification Label for WARNING! the size designation of your tire. The Load Index and Speed Symbol for your tire will be found on the original Tires and the spare tire should be replaced after six equipment tire sidewall.
Page 566: Tire Chains (Traction Devices)
564 STARTING AND OPERATING WARNING! WARNING! (Continued) • Failure to equip your vehicle with tires having • Do not use a tire, wheel size or rating other than adequate speed capability can result in sudden tire that specified for your vehicle. Some combinations failure and loss of vehicle control.
Page 567 STARTING AND OPERATING 565 • Use on Front Tires Only Four Wheel Drive (4WD) Non-Trailhawk Models with a Two-Speed Power Takeoff Unit • Due to limited clearance, the following traction de- • The use of 7mm snow chains is permitted with 225/ vices are recommended: 65R17 and 225/60R18 tires.
Page 568 566 STARTING AND OPERATING CAUTION! (Continued) CAUTION! tire chains or traction devices are used with origi- To avoid damage to your vehicle or tires, observe the nal equipment size tires. following precautions: • Damage to Four Wheel Drive (4WD) Trailhawk •...
Page 569: Tire Rotation Recommendations
STARTING AND OPERATING 567 These effects can be reduced by timely rotation of tires. CAUTION! (Continued) The benefits of rotation are especially worthwhile with • Observe the traction device manufacturer’s instruc- aggressive tread designs such as those on On/Off Road tions on the method of installation, operating type tires.
Page 570 568 STARTING AND OPERATING Front Wheel Drive (FWD) Tire Rotation Four Wheel Drive (4WD) Tire Rotation The suggested Four Wheel Drive (4WD) Tire rotation method is the “rearward cross” shown in the following diagram. I n f o r ma t i o n P r o v i d e d b y :...
Page 571: Tire Pressure Monitor System (Tpms)
STARTING AND OPERATING 569 at least three hours, or driven less than 1 mile (1.6 km) CAUTION! after a three hour period. The cold tire inflation pressure must not exceed the maximum inflation pressure molded Proper operation of four-wheel drive vehicles de- into the tire sidewall.
Page 572 570 STARTING AND OPERATING you must increase the tire pressure to the recommended approximately 24 psi (165 kPa). This tire pressure is low cold placard pressure in order for the “Tire Pressure enough to turn ON the “Tire Pressure Monitoring Telltale Monitoring Telltale Light”...
Page 573 STARTING AND OPERATING 571 NOTE: CAUTION! (Continued) • The TPMS is not intended to replace normal tire care equipped on your vehicle. Undesirable system op- and maintenance, or to provide warning of a tire eration or sensor damage may result when using failure or condition.
Page 574: Premium System - If Equipped
572 STARTING AND OPERATING • Seasonal temperature changes will affect tire pressure, • Various Tire Pressure Monitoring System messages, and the TPMS will monitor the actual tire pressure in which display in the Electronic Vehicle Information the tire. Center (EVIC) or Driver Information Display (DID). •...
Page 575 STARTING AND OPERATING 573 update, the pressure values in the graphic display in the EVIC/DID will return to their original color, and the “Tire Pressure Monitoring Telltale Light” will turn off. NOTE: When filling warm tires, the tire pressure may need to be increased up to an additional 4 psi (30 kPa) above the recommended cold placard pressure in order to turn the Tire Pressure Monitoring Telltale Light off.
Page 576 574 STARTING AND OPERATING display a SERVICE TPM SYSTEM message for a mini- no longer exists, the “Tire Pressure Monitoring Telltale mum of five seconds and then display dashes (- -) in Light” will no longer flash, and the “SERVICE TPM place of the pressure value to indicate which sensor is not SYSTEM”...
Page 577 STARTING AND OPERATING 575 Vehicles With Matching Full-Size Spare 4. The EVIC/DID will display a graphic showing the tire pressure value in the same color as the other pressure 1. The matching full size spare wheel and tire assembly values in place of the different color low tire pressure has a tire pressure monitoring sensor that can be value.
Page 578: General Information
576 STARTING AND OPERATING graphic in the EVIC/DID will still display a different will turn off and the graphic in the EVIC/DID will color pressure value and an Inflate to XX message. display a new pressure value instead of dashes (- -), as long as no tire pressure is below the low-pressure 3.
Page 579: Fuel Requirements
STARTING AND OPERATING 577 FUEL REQUIREMENTS Poor quality gasoline can cause problems such as hard starting, stalling, and hesitations. If you experience these 2.4L and 3.2L Engines symptoms, try another brand of gasoline before consid- This engine is designed to meet all emis- ering service for the vehicle.
Page 580: Gasoline/Oxygenate Blends
578 STARTING AND OPERATING Gasoline/Oxygenate Blends are not the responsibility of the manufacturer and may void or not be covered under New Vehicle Limited Some fuel suppliers blend unleaded gasoline with oxy- Warranty. genates such as ethanol. E-85 Usage In Non-Flex Fuel Vehicles CAUTION! Non-Flex Fuel Vehicles (FFV) are compatible with gaso- line containing up to 15% ethanol (E-15).
Page 581: Mmt In Gasoline
STARTING AND OPERATING 579 MMT In Gasoline that have these additives will help improve fuel economy, reduce emissions, and maintain vehicle perfor- Methylcyclopentadienyl Manganese Tricarbonyl (MMT) mance. Designated TOP TIER Detergent Gasoline con- is a manganese-containing metallic additive that is tains a higher level of detergents to further aide in blended into some gasoline to increase octane.
Page 582: Fuel System Cautions
580 STARTING AND OPERATING Fuel System Cautions CAUTION! (Continued) • The use of fuel additives, which are now being CAUTION! sold as octane enhancers, is not recommended. Follow these guidelines to maintain your vehicle’s Most of these products contain high concentrations performance: of methanol.
Page 583: Carbon Monoxide Warnings
STARTING AND OPERATING 581 Carbon Monoxide Warnings WARNING! (Continued) time the vehicle is raised. Have any abnormal WARNING! conditions repaired promptly. Until repaired, drive Carbon monoxide (CO) in exhaust gases is deadly. with all side windows fully open. Follow the precautions below to prevent carbon monoxide poisoning: FLEXIBLE FUEL (2.4L ENGINE ONLY) —...
Page 584: Ethanol Fuel (E-85)
582 STARTING AND OPERATING Fuel Requirements CAUTION! If your vehicle is E-85 compatible, it will operate on Only vehicles with the E-85 fuel filler door label or a unleaded gasoline with any octane rating, or solely E-85 yellow gas cap can operate on E-85. fuel, or any mixture of these fuels.
Page 585: Selection Of Engine Oil For Flexible Fuel Vehicles (E-85) And Gasoline Vehicles
STARTING AND OPERATING 583 NOTE: FCA US Material Standard MS-6395. It is recommended that engine oils that are API Certified and meet the • Use seasonally adjusted E-85 fuel (ASTM D5798). With requirements of Material Standard MS-6395 be used. non-seasonally adjusted E-85 fuel, hard starting and MS-6395 contains additional requirements, developed rough idle following start up may be experienced even during extensive fleet testing, to provide additional pro-...
Page 586: Cruising Range
584 STARTING AND OPERATING Cruising Range Maintenance Because E-85 fuel contains less energy per gallon/liter CAUTION! than gasoline, an increase in fuel consumption will be experienced. The miles per gallon (mpg)/kilometers per Do not use ethanol mixture greater than 85% in your liter and the driving range will decrease by approxi- vehicle.
Page 587 STARTING AND OPERATING 585 Fuel Filler Door Release Switch Fuel Filler Cap (Gas Cap) 2. Open the fuel filler door, and remove the fuel filler NOTE: cap. • In certain cold conditions, ice may prevent the fuel door from opening. If this occurs, lightly push on the fuel door to break the ice buildup and re-release the fuel door using the inside release button.
Page 588 586 STARTING AND OPERATING • When the fuel nozzle “clicks” or shuts off, the fuel tank CAUTION! is full. • Damage to the fuel system or emission control • Tighten the gas cap about one quarter turn until you system could result from using an improper fuel hear one click.
Page 589: Emergency Fuel Filler Door Release
STARTING AND OPERATING 587 2. Remove access door located on right interior trim WARNING! panel for release cable with the tip of your key. • Never have any smoking materials lit in or near the vehicle when the gas cap is removed or the tank is being filled.
Page 590: Loose Fuel Filler Cap Message
588 STARTING AND OPERATING Information (EVIC) or Driver Information Display (DID)” in “Understanding Your Instrument Panel” for further information. Tighten the fuel filler cap until a “clicking” sound is heard. This is an indication that the fuel filler cap is properly tightened. Refer to “Onboard Diagnostic System”...
Page 591 STARTING AND OPERATING 589 included on this label and indicates the Month, Day and Each axle GAWR is determined by the components in the Hour of manufacture. The bar code that appears on the system with the lowest load carrying capacity (axle, bottom of the label is your VIN.
Page 592 590 STARTING AND OPERATING Curb Weight front or rear axles has been exceeded but the total load is within the specified GVWR. If so, weight must be shifted The curb weight of a vehicle is defined as the total weight from front to rear or rear to front as appropriate until the of the vehicle with all fluids, including vehicle fuel, at full specified weight limitations are met.
Page 593: Trailer Towing
STARTING AND OPERATING 591 TRAILER TOWING exceed the GVWR. Refer to “Vehicle Loading/Vehicle Certification Label” in “Starting And Operating” for In this section you will find safety tips and information further information. on limits to the type of towing you can reasonably do with your vehicle.
Page 594 592 STARTING AND OPERATING WARNING! (Continued) WARNING! vehicle. If you use a standard weight-carrying hitch, It is important that you do not exceed the maximum you could lose control of your vehicle and cause a front or rear GAWR. A dangerous driving condition collision.
Page 595 STARTING AND OPERATING 593 Trailer Sway Control — Mechanical tow vehicle’s front axle and the trailer axle(s). When used in accordance with the manufacturer’s directions, it pro- The trailer sway control is a telescoping link that can be vides for a more level ride, offering more consistent installed between the hitch receiver and the trailer tongue steering and brake control thereby enhancing towing that typically provides adjustable friction associated with...
Page 596: Trailer Hitch Classification
594 STARTING AND OPERATING Trailer Hitch Classification WARNING! (Continued) The following chart provides the industry standard for • Weight Distributing Systems may not be compat- the maximum trailer weight a given trailer hitch class can ible with Surge Brake Couplers. Consult with your tow and should be used to assist you in selecting the hitch and trailer manufacturer or a reputable Rec- correct trailer hitch for your intended towing condition.
Page 597: Trailer Towing Weights (Maximum Trailer Weight Ratings)
STARTING AND OPERATING 595 Trailer Towing Weights (Maximum Trailer Weight Ratings) Engine/ Maximum GTW Maximum Tongue Model Frontal Area Transmission (Gross Trailer Wt.) Wt. (See Note) 2.4L/Automatic FWD or 4WD 32 sq ft (2.97 sq m) 2,000 lbs (907 kg) 200 lbs (91 kg) with or without Trailer Tow Package...
Page 598: Trailer And Tongue Weight
596 STARTING AND OPERATING Trailer And Tongue Weight Always load a trailer with 60% to 65% of the weight in the front of the trailer. This places 10% to 15% of the Gross Trailer Weight (GTW) on the tow hitch of your vehicle.
Page 599: Towing Requirements
STARTING AND OPERATING 597 Consider the following items when computing the Towing Requirements weight on the rear axle of the vehicle: To promote proper break-in of your new vehicle drive- • The tongue weight of the trailer. train components, the following guidelines are recom- mended: •...
Page 600 598 STARTING AND OPERATING WARNING! (Continued) WARNING! (Continued) • Total weight must be distributed between the tow cause a loss of control, poor performance, or dam- age to brakes, axle, engine, transmission, steering, vehicle and the trailer such that the following four suspension, chassis structure, or tires.
Page 601 STARTING AND OPERATING 599 • Check the trailer tires for proper tire inflation pres- CAUTION! sures before trailer usage. • Do not tow a trailer at all during the first 500 miles • Check for signs of tire wear or visible tire damage (805 km) the new vehicle is driven.
Page 602 600 STARTING AND OPERATING • An electronically actuated trailer brake controller is WARNING! (Continued) required when towing a trailer with electronically • Towing any trailer will increase your stopping actuated brakes. When towing a trailer equipped with distance. When towing you should allow for addi- a hydraulic surge actuated brake system, an electronic tional space between your vehicle and the vehicle brake controller is not required.
Page 603 STARTING AND OPERATING 601 Towing Requirements — Trailer Lights And Wiring Whenever you pull a trailer, regardless of the trailer size, stoplights and turn signals on the trailer are required for motoring safety. The Trailer Tow Package may include a four- and seven- pin wiring harness.
Page 604: Towing Tips
602 STARTING AND OPERATING Towing Tips Before setting out on a trip, practice turning, stopping, and backing the trailer in an area located away from heavy traffic. Automatic Transmission The DRIVE range can be selected when towing. The transmission controls include a drive strategy to avoid frequent shifting when towing.
Page 605 STARTING AND OPERATING 603 NOTE: Using a lower gear range while operating the Cooling System vehicle under heavy loading conditions will improve To reduce potential for engine and transmission over- performance and extend transmission life by reducing heating, take the following actions: excessive shifting and heat build up.
Page 606: Recreational Towing (Behind Motorhome, Etc.)
604 STARTING AND OPERATING RECREATIONAL TOWING (BEHIND MOTORHOME, ETC.) Towing This Vehicle Behind Another Vehicle 4X4 Models Wheels OFF the Front-Wheel Drive 1-Speed Power 2-Speed Power Towing Condition Ground (FWD) Models Transfer Unit Transfer Unit Flat Tow NONE NOT ALLOWED NOT ALLOWED See Instructions: •...
Page 607 STARTING AND OPERATING 605 4X4 Models Wheels OFF the Front-Wheel Drive 1-Speed Power 2-Speed Power Towing Condition Ground (FWD) Models Transfer Unit Transfer Unit Dolly Tow Front NOT ALLOWED NOT ALLOWED Rear NOT ALLOWED NOT ALLOWED NOT ALLOWED On Trailer NOTE: •...
Page 608: Recreational Towing - Front-Wheel Drive
606 STARTING AND OPERATING Recreational Towing — Front-Wheel Drive (FWD) 5. Turn the ignition to the ON/RUN position, but do not Models start the engine. DO NOT flat tow this vehicle. Damage to the drivetrain 6. Press and hold the brake pedal. will result.
Page 609: Recreational Towing - 4X4 Models With 1-Speed
STARTING AND OPERATING 607 Recreational Towing — 4X4 Models With 1-Speed Recreational Towing — 4X4 Models With 2-Speed Power Transfer Unit Power Transfer Unit The power transfer unit must be shifted into NEUTRAL Recreational towing is not allowed. These models do (N) and the transmission must be in PARK for recre- not have a NEUTRAL (N) position in the power transfer unit.
Page 610 608 STARTING AND OPERATING CAUTION! (Continued) CAUTION! (Continued) • Tow only in a forward direction. Towing this ve- • Ensure that the Electric Park Brake is released, and hicle backwards can cause severe damage to the remains released, while being towed. •...
Page 611 STARTING AND OPERATING 609 Shifting Into NEUTRAL (N) Use the following procedure to prepare your vehicle for recreational towing. WARNING! CAUTION! You or others could be injured or killed if you leave the vehicle unattended with the power transfer unit It is necessary to follow these steps to be certain that in the NEUTRAL (N) position without first fully the power transfer unit is fully in NEUTRAL (N)
Page 612 610 STARTING AND OPERATING 4. Press and hold the brake pedal. 5. Shift the transmission into NEUTRAL. 6. Using a ballpoint pen or similar object, push and hold the recessed NEUTRAL (N) button (located by the selector switch) for four seconds. The light behind the NEUTRAL (N) symbol will blink, indicating shift in progress.
Page 613 STARTING AND OPERATING 611 11. Release the brake pedal for five seconds and ensure NOTE: that there is no vehicle movement. • Steps 1 through 5 are requirements that must be met 12. Shift the transmission to NEUTRAL. before pushing the NEUTRAL (N) button, and must continue to be met until the shift has been completed.
Page 614 612 STARTING AND OPERATING Shifting Out Of NEUTRAL (N) Use the following procedure to prepare your vehicle for normal usage. 1. Bring the vehicle to a complete stop, leaving it con- nected to the tow vehicle. 2. Apply the parking brake. 3.
Page 615 STARTING AND OPERATING 613 NOTE: When shifting the power transfer unit out of NOTE: NEUTRAL (N), the engine should remain OFF to avoid • Steps 1 through 5 are requirements that must be met gear clash. before pushing the NEUTRAL (N) button, and must 9.
Page 616 I n f o r ma t i o n P r o v i d e d b y :...
Page 617 WHAT TO DO IN EMERGENCIES CONTENTS HAZARD WARNING FLASHERS ...617 JACKING AND TIRE CHANGING ..631 ▫ Jack Location/Spare Tire Stowage ..632 IF YOUR ENGINE OVERHEATS .
Page 618 616 WHAT TO DO IN EMERGENCIES ▫ 4x4 Models With 1–Speed Power Transfer SHIFT LEVER OVERRIDE ....651 Unit .......655 TOWING A DISABLED VEHICLE .
Page 619 WHAT TO DO IN EMERGENCIES 617 HAZARD WARNING FLASHERS IF YOUR ENGINE OVERHEATS The Hazard Warning flasher switch is located in the In any of the following situations, you can reduce the switch bank below the radio screen. potential for overheating your engine by taking the appropriate action.
Page 620 618 WHAT TO DO IN EMERGENCIES NOTE: There are steps that you can take to slow down WARNING! an impending overheat condition: You or others can be badly burned by hot engine • If your air conditioner (A/C) is on, turn it off. The A/C coolant (antifreeze) or steam from your radiator.
Page 621 WHAT TO DO IN EMERGENCIES 619 Torque Specifications Lug Nut/Bolt Torque **Lug Nut/ Lug Nut/ Bolt Size Bolt Socket Size 100 Ft-Lbs (135 N·m) M12 x 1.25 19 mm **Use only your Authorized Dealer recommended lug nuts/bolts and clean or remove any dirt or oil before tightening.
Page 622 620 WHAT TO DO IN EMERGENCIES WARNING! To avoid the risk of forcing the vehicle off the jack, do not tighten the lug nuts fully until the vehicle has been lowered. Failure to follow this warning may result in personal injury. TIRE SERVICE KIT —...
Page 623 WHAT TO DO IN EMERGENCIES 621 Tire Service Kit Storage Tire Service Kit Components And Operation The Tire Service Kit is stowed under the load floor behind the rear seat. 1. Open the liftgate. 2. Lift the access cover using the load floor handle. Tire Service Kit Components 1 —...
Page 624 622 WHAT TO DO IN EMERGENCIES Using The Mode Select Knob And Hoses Using The Deflation Button Your Tire Service Kit is equipped with the following Push the Deflation Button (2) to reduce the air symbols to indicate the air or sealant mode. pressure in the tire if it becomes over-inflated.
Page 625 WHAT TO DO IN EMERGENCIES 623 from the vehicle or tire and wheel components. Once the sealant dries, it can easily be peeled off and properly discarded. • For optimum performance, make sure the valve stem on the wheel is free of debris before connecting the Tire Service Kit.
Page 626 624 WHAT TO DO IN EMERGENCIES WARNING! WARNING! (Continued) • Keep Tire Service Kit away from open flames or • Do not attempt to seal a tire on the side of the heat source. vehicle closest to traffic. Pull far enough off the •...
Page 627 WHAT TO DO IN EMERGENCIES 625 on the ground. This will provide the best positioning WARNING! (Continued) of the kit when injecting the sealant into the deflated • Tire Service Kit Sealant solution contains latex. In tire and running the air pump. Move the vehicle as case of an allergic reaction or rash, consult a phy- necessary to place the valve stem in this position sician immediately.
Page 628 626 WHAT TO DO IN EMERGENCIES 4. Remove the cap from the valve stem and then screw NOTE: Sealant may leak out through the puncture in the the fitting at the end of the Sealant Hose (6) onto the tire. valve stem.
Page 629 WHAT TO DO IN EMERGENCIES 627 NOTE: If the Mode Select Knob (5) is on Air Mode and latch pillar (recommended pressure). Check the tire the pump is operating, air will dispense from the Air pressure by looking at the Pressure Gauge (3). Pump Hose (7) only, not the Sealant Hose (6).
Page 630 628 WHAT TO DO IN EMERGENCIES 3. Immediately disconnect the Sealant Hose (6) from the (D) Drive Vehicle: valve stem, reinstall the cap on the fitting at the end of Immediately after injecting sealant and inflating the tire, the hose, and place the Tire Service Kit in the vehicle drive the vehicle 5 miles (8 km) or 10 minutes to ensure storage location.
Page 631 WHAT TO DO IN EMERGENCIES 629 (E) After Driving: If tire pressure is less than 19 psi (1.3 Bar): Pull over to a safe location. Refer to “Whenever You Stop The tire is too badly damaged. Do not attempt to drive to Use Tire Service Kit”...
Page 632 630 WHAT TO DO IN EMERGENCIES 2. Disconnect the Tire Service Kit from the valve stem, NOTE: When having the tire serviced, advise the autho- reinstall the cap on the valve stem and unplug from 12 rized dealer or service center that the tire has been sealed Volt outlet.
Page 633 WHAT TO DO IN EMERGENCIES 631 5. Position the new Sealant Bottle (1) in the housing so JACKING AND TIRE CHANGING that the Sealant Hose (6) aligns with the hose slot in the front of the housing. Push the bottle into the WARNING! housing.
Page 634 632 WHAT TO DO IN EMERGENCIES WARNING! (Continued) • The jack is designed to be used as a tool for changing tires only. The jack should not be used to lift the vehicle for service purposes. The vehicle should be jacked on a firm level surface only. Avoid ice or slippery areas.
Page 635 WHAT TO DO IN EMERGENCIES 633 4. Remove the fastener securing the jack and spare tire. 5. Remove the chocks. 6. Remove the scissors jack and wheel bolt wrench from the spare wheel as an assembly. Turn the jack screw to the left to loosen the wheel bolt wrench, and remove the wrench from the jack assembly.
Page 636 634 WHAT TO DO IN EMERGENCIES NOTE: The jack handle attaches to the side of the jack Preparations For Jacking with two attachment points. When the jack is partially 1. Park the vehicle on a firm level surface as far from the expanded, the tension between the two attachment edge of the roadway as possible.
Page 637 WHAT TO DO IN EMERGENCIES 635 3. Set the parking brake. Jacking Instructions 4. Place the shift lever into PARK. WARNING! 5. Turn the ignition off to the LOCK position. Carefully follow these tire changing warnings to 6. Chock both the front and rear of the wheel diagonally help prevent personal injury or damage to your opposite of the jacking position.
Page 638 636 WHAT TO DO IN EMERGENCIES WARNING! (Continued) • Do not let anyone sit in the vehicle when it is on a jack. • Do not get under the vehicle when it is on a jack. If you need to get under a raised vehicle, take it to a Jack Warning Label service center where it can be raised on a lift.
Page 639 WHAT TO DO IN EMERGENCIES 637 3. Before raising the vehicle, use the wheel bolt wrench to loosen, but not remove, the wheel bolts on the wheel with the flat tire. Turn the wheel bolts counter- clockwise one turn while the wheel is still on the ground.
Page 640 638 WHAT TO DO IN EMERGENCIES Rear Jacking Location Rear Jacking Engagement Point I n f o r ma t i o n P r o v i d e d b y :...
Page 641 WHAT TO DO IN EMERGENCIES 639 Front Jacking Location Front Jacking Engagement Point 5. Raise the vehicle just enough to remove the flat tire. I n f o r ma t i o n P r o v i d e d b y :...
Page 642 640 WHAT TO DO IN EMERGENCIES WARNING! Raising the vehicle higher than necessary can make the vehicle less stable. It could slip off the jack and hurt someone near it. Raise the vehicle only enough to remove the tire. 6. Remove the wheel bolts and tire. 7.
Page 643 WHAT TO DO IN EMERGENCIES 641 NOTE: 10. Lower the vehicle to the ground by turning the jack handle counterclockwise. • For vehicles so equipped, do not attempt to install a center cap or wheel cover on the compact spare. 11.
Page 644 642 WHAT TO DO IN EMERGENCIES Assembled Jack Stowed Tire, Jack And Chock 12. Securely stow the jack, tools, chocks and flat tire. I n f o r ma t i o n P r o v i d e d b y :...
Page 645 WHAT TO DO IN EMERGENCIES 643 WARNING! WARNING! A loose tire or jack thrown forward in a collision or To avoid the risk of forcing the vehicle off the jack, hard stop could endanger the occupants of the ve- do not tighten the lug nuts fully until the vehicle has hicle.
Page 646 644 WHAT TO DO IN EMERGENCIES 5. Lower the jack until it is free. Remove the wheel NOTE: When using a portable battery booster pack chocks. Reassemble the lug wrench to the jack assem- follow the manufacturer’s operating instructions and bly and stow it in the spare tire area.
Page 647 WHAT TO DO IN EMERGENCIES 645 Preparations For Jump-Start The battery in your vehicle is located in the front of the engine compartment, behind the left headlight assembly. NOTE: The positive battery post is covered with a protective cap. Lift up on the cap to gain access to the positive battery post.
Page 648 646 WHAT TO DO IN EMERGENCIES 3. If using another vehicle to jump-start the battery, park WARNING! the vehicle within the jumper cables reach, set the • Take care to avoid the radiator cooling fan when- parking brake and make sure the ignition is OFF. ever the hood is raised.
Page 649 WHAT TO DO IN EMERGENCIES 647 CAUTION! WARNING! Failure to follow these procedures could result in Do not connect the jumper cable to the negative (-) damage to the charging system of the booster vehicle post of the discharged battery. The resulting electri- or the discharged vehicle.
Page 650 648 WHAT TO DO IN EMERGENCIES 6. Once the engine is started, remove the jumper cables CAUTION! in the reverse sequence: Accessories plugged into the vehicle power outlets Disconnecting The Jumper Cables draw power from the vehicle’s battery, even when not 1.
Page 651 WHAT TO DO IN EMERGENCIES 649 NOTE: Shifts between DRIVE and REVERSE can only be CAUTION! (Continued) achieved at wheel speeds of 5 mph (8 km/h) or less. • When “rocking” a stuck vehicle by shifting be- Whenever the transmission remains in NEUTRAL for tween DRIVE and REVERSE, do not spin the more than two seconds, you must push the brake pedal wheels faster than 15 mph (24 km/h), or drivetrain...
Page 652 650 WHAT TO DO IN EMERGENCIES WARNING! WARNING! Fast spinning tires can be dangerous. Forces gener- Recovery straps should only be used in emergencies to ated by excessive wheel speeds may cause damage, or rescue stranded vehicles. Only use Recovery straps on even failure, of the axle and tires.
Page 653: Shift Lever Override
WHAT TO DO IN EMERGENCIES 651 Using Recovery Strap 2. Apply the parking brake. 1. Review all warnings and instructions first. 3. Using a screwdriver or similar tool, carefully separate the shifter bezel and boot assembly from the center 2. Position the recovery vehicle. console.
Page 654: Towing A Disabled Vehicle
652 WHAT TO DO IN EMERGENCIES TOWING A DISABLED VEHICLE This section describes procedures for towing a disabled vehicle using a commercial towing service. If the trans- mission and drivetrain are operable, disabled 4x4 ve- hicles may also be towed as described under “Recre- ational Towing”...
Page 655 WHAT TO DO IN EMERGENCIES 653 4X4 MODELS Towing Condi- Wheels OFF FWD MODELS 1–SPEED 2–SPEED tion the Ground POWER TRANSFER POWER TRANSFER UNIT UNIT Wheel Lift or Rear NOT AL- NOT ALLOWED NOT ALLOWED Dolly Tow LOWED Front NOT ALLOWED NOT ALLOWED Flatbed BEST...
Page 656: Front-Wheel Drive (Fwd) Models
654 WHAT TO DO IN EMERGENCIES • Vehicles with a discharged battery or total electrical CAUTION! failure when the electric parking brake (EPB) is engaged, • Do not use sling type equipment when towing. will need a wheel dolly or jack to raise the rear wheels off the ground when moving the vehicle onto a flatbed.
Page 657 WHAT TO DO IN EMERGENCIES 655 Ensure that the Electric Park Brake is released, and CAUTION! remains released, while being towed. • DO NOT tow this vehicle with ANY of its wheels CAUTION! on the ground. Damage to the drivetrain will result. •...
Page 658: 4X4 Models With 2-Speed Power Transfer Unit
656 WHAT TO DO IN EMERGENCIES 4x4 Models With 2–Speed Power Transfer Unit Refer to “Recreational Towing” in “Starting and Operat- ing” for detailed instructions. The manufacturer recommends towing with all four wheels OFF the ground. CAUTION! Acceptable methods are to tow the vehicle on a flatbed or •...
Page 659 MAINTAINING YOUR VEHICLE CONTENTS ▫ Engine Oil Filter ..... .668 ENGINE COMPARTMENT — 2.4L ..659 ▫...
Page 660 658 MAINTAINING YOUR VEHICLE ▫ Brake System ......696 ▫ Front Turn Signals And Front Side Marker Lamps ......721 ▫...
Page 661: Engine Compartment - 2.4L
MAINTAINING YOUR VEHICLE 659 ENGINE COMPARTMENT — 2.4L 1 — Air Cleaner Filter 5 — Power Distribution Center (Fuses) 2 — Engine Coolant Pressure Cap 6 — Battery 3 — Oil Fill Cap 7 — Washer Fluid Reservoir 4 — Brake Fluid Reservoir 8 —...
Page 662: Engine Compartment - 3.2L
660 MAINTAINING YOUR VEHICLE ENGINE COMPARTMENT — 3.2L 1 — Engine Coolant Reservoir 5 — Washer Fluid Reservoir 2 — Engine Oil Filter Access Cover 6 — Engine Oil Dipstick 3 — Brake Fluid Reservoir 7 — Engine Oil Fill 4 —...
Page 663: Onboard Diagnostic System - Obd Ii
MAINTAINING YOUR VEHICLE 661 ONBOARD DIAGNOSTIC SYSTEM — OBD II CAUTION! Your vehicle is equipped with a sophisticated Onboard • Prolonged driving with the MIL on could cause Diagnostic system called OBD II. This system monitors further damage to the emission control system. It the performance of the emissions, engine, and automatic could also affect fuel economy and driveability.
Page 664: Emissions Inspection And Maintenance
662 MAINTAINING YOUR VEHICLE further information. Tighten the fuel filler cap until a serviced, recently had a dead battery or a battery replace- “clicking” sound is heard. This is an indication that the ment. If the OBD II system should be determined not fuel filler cap is properly tightened.
Page 665: Replacement Parts
MAINTAINING YOUR VEHICLE 663 3. Approximately 15 seconds later, one of two things will system to update. A recheck with the above test routine happen: may then indicate that the system is now ready. • The MIL will flash for about 10 seconds and then Regardless of whether your vehicle’s OBD II system is return to being fully illuminated until you turn OFF ready or not, if the MIL is illuminated during normal...
Page 666: Dealer Service
664 MAINTAINING YOUR VEHICLE DEALER SERVICE MAINTENANCE PROCEDURES Your authorized dealer has the qualified service person- The pages that follow contain the required maintenance nel, special tools, and equipment to perform all service services determined by the engineers who designed your operations in an expert manner.
Page 667: Engine Oil
MAINTAINING YOUR VEHICLE 665 regular intervals, such as every month. The best time to CAUTION! (Continued) check the engine oil level is about five minutes after a • Your vehicle has been built with improved fluids fully warmed up engine is shut off. that protect the performance and durability of your Checking the oil while the vehicle is on level ground will vehicle and also allow extended maintenance inter-...
Page 668 666 MAINTAINING YOUR VEHICLE Engine Oil Selection CAUTION! For best performance and maximum protection under all Overfilling or underfilling the crankcase will cause types of operating conditions, the manufacturer only aeration or loss of oil pressure. This could damage recommends engine oils that are API Certified and meet your engine.
Page 669 MAINTAINING YOUR VEHICLE 667 Lubricants which do not have both the engine oil certi- CAUTION! fication mark and the correct SAE viscosity grade num- ber should not be used. Do not use chemical flushes in your engine oil as the chemicals can damage your engine.
Page 670: Engine Oil Filter
668 MAINTAINING YOUR VEHICLE Synthetic Engine Oils environment. Contact your authorized dealer, service station or governmental agency for advice on how and You may use synthetic engine oils provided the recom- where used oil and oil filters can be safely discarded in mended oil quality requirements are met, and the recom- your area.
Page 671: Engine Air Cleaner Filter
MAINTAINING YOUR VEHICLE 669 Engine Air Cleaner Filter Engine Air Cleaner Filter Selection Refer to the “Maintenance Schedule” for the proper The quality of replacement engine air cleaner filters maintenance intervals. varies considerably. Only high quality filters should be used to assure most efficient service. MOPAR engine air NOTE: Be sure to follow the “Sever Duty Conditions”...
Page 672 670 MAINTAINING YOUR VEHICLE 2. Push in on the quick connect clip with your thumb and remove by pulling hose (If Equipped) away from air cleaner filter cover. Air Cleaner Filter Cover 1 — Clean Air Hose Clamp 2 — Air Hose (If Equipped) 3 —...
Page 673 MAINTAINING YOUR VEHICLE 671 3. Lift the air cleaner cover to access the air cleaner filter. 4. Remove the air cleaner filter element from the housing assembly. Open Air Cleaner Filter Assembly Air Cleaner Filter 1 — Air Cleaner Cover 2 —...
Page 674: Accessory Drive Belt Inspection
672 MAINTAINING YOUR VEHICLE Engine Air Cleaner Filter Installation WARNING! (Continued) NOTE: Inspect and clean the housing if dirt or debris is • When working near the radiator cooling fan, dis- present before replacing the air filter element. connect the fan motor lead. The fan is temperature controlled and can start at any time regardless of 1.
Page 675 MAINTAINING YOUR VEHICLE 673 • Rib or belt wear normal. Any belt with cracks running along a rib must be replaced. Also have the belt replaced if it has excessive • Longitudinal belt cracking (cracks between two ribs) wear, frayed cords or severe glazing. •...
Page 676: Maintenance-Free Battery
674 MAINTAINING YOUR VEHICLE Maintenance-Free Battery WARNING! (Continued) Your vehicle is equipped with a maintenance-free battery. an output greater than 12 Volts. Do not allow cable You will never have to add water, nor is periodic main- clamps to touch each other. tenance required.
Page 677: Air Conditioner Maintenance
MAINTAINING YOUR VEHICLE 675 CAUTION! (Continued) WARNING! • If a “fast charger” is used while the battery is in the • Use only refrigerants and compressor lubricants vehicle, disconnect both vehicle battery cables be- approved by the manufacturer for your air condi- fore connecting the charger to the battery.
Page 678 676 MAINTAINING YOUR VEHICLE Refrigerant Recovery And Recycling HFO 1234yf CAUTION! — If Equipped Do not use chemical flushes in your air conditioning HFO 1234yf Air Conditioning Refrigerant is a hydro- system as the chemicals can damage your air condi- fluoolefine HFO that is endorsed by the Environmental tioning components.
Page 679 MAINTAINING YOUR VEHICLE 677 Air Conditioning Filter Replacement (A/C Air Filter) WARNING! Do not remove the A/C air filter while the blower is operating or personal injury may result. The A/C air filter is located in front of the evaporator on the lower right of center console.
Page 680 678 MAINTAINING YOUR VEHICLE Hush Panel Air Filter Cover Location 4. Remove the filter door by pushing down the tab on the 5. Remove the A/C air filter by pulling it straight out of top of the door to release the cover then rotate the door the housing.
Page 681: Body Lubrication
MAINTAINING YOUR VEHICLE 679 CAUTION! The A/C air filter is identified with an arrow to indicate airflow direction through the filter. Failure to properly install the filter will result in the need to replace it more often. 7. Install the passenger side hush panel under the dash panel and console closeout.
Page 682: Windshield Wiper Blades
680 MAINTAINING YOUR VEHICLE the application of any lubricant, the parts concerned Operation of the wipers on dry glass for long periods should be wiped clean to remove dust and grit; after may cause deterioration of the wiper blades. Always use lubricating excess oil and grease should be removed.
Page 683 MAINTAINING YOUR VEHICLE 681 The wiper blades and wiper arms should be inspected Front Wiper Blade Removal/Installation periodically, not just when wiper performance problems are experienced. This inspection should include the fol- CAUTION! lowing points: Do not allow the wiper arm to spring back against •...
Page 684 682 MAINTAINING YOUR VEHICLE holding the wiper arm with one hand, slide the wiper blade down towards the base of the wiper arm. Wiper Blade With Release Tab In Locked Position 1 — Wiper Wiper Blade With Release Tab In Unlocked Position 2 —...
Page 685 MAINTAINING YOUR VEHICLE 683 3. With the wiper blade disengaged, remove the wiper blade from the wiper arm by holding the wiper arm with one hand and separating the wiper blade from the wiper arm with the other hand (move the wiper blade toward the right side of the vehicle to separate the wiper blade from the wiper arm).
Page 686 684 MAINTAINING YOUR VEHICLE Installing The Front Wipers Rear Wiper Blade Removal/Installation 1. Lift the wiper arm off of the glass, until the wiper arm 1. Lift the rear wiper arm pivot cap away from the glass is in the full up position. to allow the rear wiper blade to be raised off of the glass.
Page 687 MAINTAINING YOUR VEHICLE 685 Wiper Pivot Cap In Unlocked Position Wiper Blade In Folded Out Position 1 — Wiper Arm Pivot Cap 1 — Wiper Arm Pivot Cap 2 — Wiper Arm 2 — Wiper Arm 3 — Wiper Blade 2.
Page 688 686 MAINTAINING YOUR VEHICLE arm with your right hand. With your left hand hold the wiper arm as you pull the wiper blade away from the wiper arm past its stop far enough to unsnap the wiper blade pivot pin from the receptacle on the end of the wiper arm.
Page 689: Adding Washer Fluid
MAINTAINING YOUR VEHICLE 687 Installing The Rear Wiper Adding Washer Fluid The windshield and rear window washers share the same 1. Lift the rear wiper arm pivot cap away from the glass fluid reservoir. The fluid reservoir is located in the front to allow the rear wiper blade to be raised off of the of the engine compartment.
Page 690: Exhaust System
688 MAINTAINING YOUR VEHICLE exhaust system inspected each time the vehicle is raised WARNING! for lubrication or oil change. Replace as required. Commercially available windshield washer solvents WARNING! are flammable. They could ignite and burn you. Care must be exercised when filling or working around •...
Page 691 MAINTAINING YOUR VEHICLE 689 Under normal operating conditions, the catalytic con- CAUTION! verter will not require maintenance. However, it is im- • The catalytic converter requires the use of un- portant to keep the engine properly tuned to assure proper catalyst operation and prevent possible catalyst leaded fuel only.
Page 692: Cooling System
690 MAINTAINING YOUR VEHICLE To minimize the possibility of catalytic converter damage: WARNING! (Continued) • Do not shut off the engine or interrupt the ignition, you see or hear steam coming from under the hood, when the transmission is in gear and the vehicle is in do not open the hood until the radiator has had time motion.
Page 693 MAINTAINING YOUR VEHICLE 691 Check the engine cooling system hoses for brittle rubber, If the engine coolant (antifreeze) is dirty or contains cracking, tears, cuts, and tightness of the connection at visible sediment, have an authorized dealer clean and the coolant recovery bottle and radiator. Inspect the flush with OAT coolant (antifreeze) (conforming to entire system for leaks.
Page 694 692 MAINTAINING YOUR VEHICLE CAUTION! (Continued) CAUTION! (Continued) • This vehicle has not been designed for use with Organic Additive Technology (OAT) engine cool- propylene glycol-based engine coolant (antifreeze). ant is different and should not be mixed with Use of propylene glycol-based engine coolant (an- Hybrid Organic Additive Technology (HOAT) en- tifreeze) is not recommended.
Page 695 MAINTAINING YOUR VEHICLE 693 Please review these recommendations for using Organic Please note that it is the owner’s responsibility to main- Additive Technology (OAT) engine coolant (antifreeze) tain the proper level of protection against freezing ac- that meets the requirements of FCA Material Standard cording to the temperatures occurring in the area where MS.90032.
Page 696 694 MAINTAINING YOUR VEHICLE Cooling System Pressure Cap WARNING! (Continued) The cap must be fully tightened to prevent loss of engine • Do not use a pressure cap other than the one coolant (antifreeze), and to ensure that engine coolant specified for your vehicle.
Page 697 MAINTAINING YOUR VEHICLE 695 Coolant Level Points To Remember The coolant bottle provides a quick visual method for NOTE: When the vehicle is stopped after a few miles/ determining that the coolant level is adequate. With the kilometers of operation, you may observe vapor coming engine OFF and cold, the level of the engine coolant from the front of the engine compartment.
Page 698: Brake System
696 MAINTAINING YOUR VEHICLE • If frequent engine coolant (antifreeze) additions are Brake System required, the cooling system should be pressure tested In order to assure brake system performance, all brake for leaks. system components should be inspected periodically. • Maintain engine coolant (antifreeze) concentration at a Refer to the “Maintenance Schedule”...
Page 699 MAINTAINING YOUR VEHICLE 697 Be sure to clean the top of the master cylinder area before WARNING! (Continued) removing the cap. If necessary, add fluid to bring the can severely damage your brake system and/or fluid level up to the requirements described on the brake impair its performance.
Page 700: Automatic Transmission
698 MAINTAINING YOUR VEHICLE NOTE: No chemical flushes should be used in any WARNING! (Continued) transmission; only the approved lubricant should be the brake fluid to catch fire. Brake fluid can also used. damage painted and vinyl surfaces, care should be taken to avoid its contact with these surfaces.
Page 701 MAINTAINING YOUR VEHICLE 699 transmission. Avoid using transmission sealers as they the transmission fluid level checked. Operating the ve- may adversely affect seals. hicle with an improper fluid level can cause severe transmission damage. CAUTION! CAUTION! Do not use chemical flushes in your transmission as If a transmission fluid leak occurs, visit your autho- the chemicals can damage your transmission compo- nents.
Page 702: Appearance Care And Protection From Corrosion
700 MAINTAINING YOUR VEHICLE Appearance Care And Protection From Corrosion What Causes Corrosion? Corrosion is the result of deterioration or removal of Protection Of Body And Paint From Corrosion paint and protective coatings from your vehicle. Vehicle body care requirements vary according to geo- graphic locations and usage.
Page 703 MAINTAINING YOUR VEHICLE 701 • If insects, tar, or other similar deposits have accumu- Special Care lated on your vehicle, use MOPAR Super Kleen Bug • If you drive on salted or dusty roads or if you drive and Tar Remover to remove. near the ocean, hose off the undercarriage at least once •...
Page 704 702 MAINTAINING YOUR VEHICLE • If you carry special cargo such as chemicals, fertilizers, NOTE: If your vehicle is equipped with Dark Vapor or de-icer salt, etc., be sure that such materials are well Black Satin Chrome wheels DO NOT USE wheel cleaners, packaged and sealed.
Page 705 MAINTAINING YOUR VEHICLE 703 Stain Repel Fabric Cleaning Procedure — If Interior Care Equipped Use MOPAR Total Clean to clean fabric upholstery and Stain Repel seats may be cleaned in the following man- carpeting. ner: Use MOPAR Total Clean to clean vinyl upholstery. •...
Page 706 704 MAINTAINING YOUR VEHICLE WARNING! CAUTION! Do not use volatile solvents for cleaning purposes. Do not use Alcohol and Alcohol-based and/or Keton Many are potentially flammable, and if used in based cleaning products to clean leather seats, as closed areas they may cause respiratory harm. damage to the seat may result.
Page 707 MAINTAINING YOUR VEHICLE 705 Glass Surfaces 1. Clean with a wet soft cloth. A mild soap solution may be used, but do not use high alcohol content or All glass surfaces should be cleaned on a regular basis abrasive cleaners. If soap is used, wipe clean with a with MOPAR Glass Cleaner, or any commercial clean damp cloth.
Page 708: Fuses
706 MAINTAINING YOUR VEHICLE WARNING! WARNING! (Continued) fuse of higher amp rating. Never replace a blown A frayed or torn belt could rip apart in a collision and fuse with metal wires or any other material. Failure leave you with no protection. Inspect the belt system to use proper fuses may result in serious personal periodically, checking for cuts, frays, or loose parts.
Page 709: Power Distribution Center
MAINTAINING YOUR VEHICLE 707 Power Distribution Center The Power Distribution Center is located in the engine compartment near the battery. This center contains car- tridge fuses, mini-fuses and relays. A label that identifies each component is printed on the inside of the cover. Power Distribution Center I n f o r ma t i o n P r o v i d e d b y :...
Page 710 708 MAINTAINING YOUR VEHICLE Cavity Blade Fuse Cartridge Fuse Description – – Not Used 15 Amp Blue – Powertrain Control Module - PCM (Diesel Only) 25 Amp Clear – Engine Control Module (ECM)/Fuel Injection – – Not Used 20 Amp Yellow –...
Page 711 MAINTAINING YOUR VEHICLE 709 Cavity Blade Fuse Cartridge Fuse Description – 40 Amp Green Starter Solenoid 10 Amp Red – A/C Compressor Clutch – – Not Used 5 Amp Tan – Radiator Fan 70 Amp Tan – Body Controller Module (BCM) - Feed 2 50 Amp Red –...
Page 712 710 MAINTAINING YOUR VEHICLE Cavity Blade Fuse Cartridge Fuse Description – – Not Used – – Not Used – – Not Used – – Not Used – – Not Used – – Not Used – 60 Amp Yellow Glow Plugs (Diesel Only) - If Equipped –...
Page 713 MAINTAINING YOUR VEHICLE 711 Cavity Blade Fuse Cartridge Fuse Description – 30 Amp Pink Trailer Tow / 7-Way Connector - If Equipped – 30 Amp Pink Passenger Door Module (PDM) - If Equipped – 25 Amp Clear Sunroof - If Equipped –...
Page 714 712 MAINTAINING YOUR VEHICLE Cavity Blade Fuse Cartridge Fuse Description 10 Amp Red – Occupant Classification Module/VSM/ESC – 30 Amp Pink Drivetrain Control Module (DTCM) If Equipped 20 Amp Yellow – Power Outlet - Center Console 20 Amp Yellow – Trailer Tow Lights Right - If Equipped 20 Amp Yellow –...
Page 715 MAINTAINING YOUR VEHICLE 713 Cavity Blade Fuse Cartridge Fuse Description 10 Amp Red – Power Transfer Unit Switch (TSBM) / Active Grill Shutter (AGS) - If Equipped with Gas Engine 10 Amp Red – Power Transfer Unit Switch (TSBM) - If Equipped with Die- sel Engine 5 Amp Tan –...
Page 716 714 MAINTAINING YOUR VEHICLE Cavity Blade Fuse Cartridge Fuse Description 10 Amp Red – Integrated Center Stack (ICS) / HVAC / Aux Switch Bank Module (ASBM) / Instrument Panel Cluster (IPC) 20 Amp Yellow – Radio / CD - If Equipped –...
Page 717 MAINTAINING YOUR VEHICLE 715 Cavity Blade Fuse Cartridge Fuse Description 20 Amp Yellow – Power Outlet Rear - If Equipped - Customer Selectable – – Not Used – 40 Amp Green Brake System Module (BSM) - Pump Motor – 30 Amp Pink Electric Park Brake (EPB) - Right 10 Amp Red –...
Page 718: Interior Fuses
716 MAINTAINING YOUR VEHICLE Interior Fuses The interior fuse panel is located in the passenger com- partment on the left side dash panel under the instru- ment panel. Cavity Blade Fuse Description 15 Amp Blue Low Beam Left 10 Amp Red Interior Lighting 10 Amp Red Intrusion Module/Siren –...
Page 719 MAINTAINING YOUR VEHICLE 717 Cavity Blade Fuse Description 10 Amp Red Door Locks – Driver Unlock 7.5 Amp Brown Fog Lamp Front Left 7.5 Amp Brown Fog Lamp Front Right 10 Amp Red Low Beam Right I n f o r ma t i o n P r o v i d e d b y :...
Page 720: Vehicle Storage
718 MAINTAINING YOUR VEHICLE • Anytime you store your vehicle, or keep it out of VEHICLE STORAGE service (i.e. vacation) for two weeks or more, run the If you are leaving your vehicle dormant for more than 21 air conditioning system at idle for about five minutes days you may want to take steps to protect your battery.
Page 721 MAINTAINING YOUR VEHICLE 719 Exterior Bulbs Bulb Number Low Beam/High Beam (Bi-Halogen) Headlamps HIR2 Low Beam/High Beam (Bi-Xenon) Headlamps D3S (Serviced at an Authorized Dealer) Front Park/Daytime Running Lamps LED (Serviced at an Authorized Dealer) Front Turn Signal Lamps WY21W Front Fog Lamps H11LL Rear Tail/Turn/Stop Lamps...
Page 722: Bulb Replacement
720 MAINTAINING YOUR VEHICLE BULB REPLACEMENT NOTE: On vehicles equipped with HID headlamps, when the headlamps are turned on, there is a blue hue to NOTE: Lens fogging can occur under certain atmo- the lights. This diminishes and becomes more white after spheric conditions.
Page 723: Front Turn Signals And Front Side Marker Lamps
MAINTAINING YOUR VEHICLE 721 3. Firmly grasp the cap and rotate it counterclockwise to 7. Install the bulb cap in the headlamp housing and unlock it. rotate clockwise to lock it in place. 4. Firmly grasp the bulb and connector assembly and 8.
Page 724: Front Fog Lamp
722 MAINTAINING YOUR VEHICLE 5. Re-install air cleaner filter housing if removed. 5. Install the bulb and socket assembly into the into the fog lamp housing, and rotate the connector clockwise Front Fog Lamp to lock it in place. 1. Remove the 3 hex head screws from the wheel liner. 6.
Page 725: Bodyside Mounted Back-Up Lamp
MAINTAINING YOUR VEHICLE 723 4. Disconnect the electrical connector. CAUTION! 5. Twist the socket counterclockwise and remove from Do not touch the new bulb with your fingers. Oil housing. contamination will severely shorten bulb life. If the 6. Pull the bulb to remove it from the socket. bulb comes in contact with any oily surface, clean the bulb with rubbing alcohol.
Page 726: License Plate Lamp
724 MAINTAINING YOUR VEHICLE 4. Using a fiber stick or flat blade screw driver, open the License Plate Lamp trim panel exposing the back of the liftgate lamp. 1. Using a small screwdriver, press inward the locking 5. Disconnect the electrical connector. tab on the side of the lamp assembly and pull down on the lamp assembly for removal.
Page 727: Fluid Capacities
MAINTAINING YOUR VEHICLE 725 FLUID CAPACITIES U.S. Metric Fuel (Approximate) 2.4L and 3.2L Engines 15.8 Gallons 60 Liters Engine Oil With Filter 2.4 Liter Engine (SAE 0W-20, API Certified) 5.5 Quarts 5.2 Liters 3.2 Liter Engine (SAE 5W-20, API Certified) 6 Quarts 5.6 Liters Cooling System*...
Page 728: Fluids, Lubricants, And Genuine Parts
726 MAINTAINING YOUR VEHICLE FLUIDS, LUBRICANTS, AND GENUINE PARTS Engine Component Fluid, Lubricant, or Genuine Part Engine Coolant We recommend you use MOPAR Antifreeze/Coolant 10 Year/150,000 Mile Formula OAT (Organic Additive Technology) or equivalent meeting the requirements of FCA Standard MS.90032.
Page 729 MAINTAINING YOUR VEHICLE 727 Component Fluid, Lubricant, or Genuine Part Fuel Selection – 2.4L 87 Octane, 0-15% Ethanol. and 3.2L Engines CAUTION! CAUTION! (Continued) OAT coolant (conforming to MS.90032), by an au- • Mixing of engine coolant (antifreeze) other than thorized dealer as soon as possible.
Page 730: Chassis
728 MAINTAINING YOUR VEHICLE Chassis Component Fluid, Lubricant, or Genuine Part Automatic Transmission Use only MOPAR ZF 8&9 Speed ATF Automatic Transmission Fluid, or equivalent. Failure to use the correct fluid may affect the function or performance of your transmission. Brake Master Cylinder We recommend you use MOPAR DOT 3 Brake Fluid, SAE J1703 should be used.
Page 731: Maintenance Schedules
MAINTENANCE SCHEDULES CONTENTS ▫ Maintenance Chart.....732 MAINTENANCE SCHEDULE ... . .730 I n f o r ma t i o n P r o v i d e d b y :...
Page 732 730 MAINTENANCE SCHEDULES MAINTENANCE SCHEDULE than your authorized dealer, the message can be reset by referring to the steps described under “Electronic Vehicle Your vehicle is equipped with an automatic oil change Information Center (EVIC)” or “Driver Information Dis- indicator system. The oil change indicator system will play (DID)”...
Page 733 MAINTENANCE SCHEDULES 731 Once A Month Or Before A Long Trip: At Every Oil Change Interval As Indicated By Oil • Check engine oil level. Change Indicator System: • Change oil and filter • Check windshield washer fluid level. • Rotate the tires. Rotate at the first sign of irregu- •...
Page 734 732 MAINTENANCE SCHEDULES Maintenance Chart Mileage or time passed (whichever comes first) Or Years: Or Kilometers: Additional Inspections Inspect the CV joints. Inspect front suspension, boot seals. tie rod ends, and replace if necessary. Inspect the brake linings, parking brake function. Inspect front accessory drive belt, tensioner, idler pulley, and replace if necessary.
Page 735 MAINTENANCE SCHEDULES 733 Mileage or time passed (whichever comes first) Or Years: Or Kilometers: Replace spark plugs ** Flush and replace the engine coolant at 10 years or 150,000 miles (240,000 km) whichever comes first. Inspect and replace PCV valve if necessary. ** The spark plug change interval is mileage based only, yearly intervals do not apply.
Page 736 734 MAINTENANCE SCHEDULES WARNING! • You can be badly injured working on or around a motor vehicle. Do only service work for which you have the knowledge and the right equipment. If you have any doubt about your ability to perform a service job, take your vehicle to a competent me- chanic.
Page 737 IF YOU NEED CONSUMER ASSISTANCE CONTENTS ▫ Customer Assistance For The Hearing Or SUGGESTIONS FOR OBTAINING SERVICE FOR YOUR VEHICLE ..... . .737 Speech Impaired (TDD/TTY) .
Page 738 736 IF YOU NEED CONSUMER ASSISTANCE ▫ Traction Grades ..... . .743 DEPARTMENT OF TRANSPORTATION UNIFORM TIRE QUALITY GRADES ....743 ▫...
Page 739: Suggestions For Obtaining Service For Your Vehicle
IF YOU NEED CONSUMER ASSISTANCE 737 SUGGESTIONS FOR OBTAINING SERVICE FOR Be Reasonable With Requests YOUR VEHICLE If you list a number of items and you must have your vehicle by the end of the day, discuss the situation with Prepare For The Appointment the service advisor and list the items in order of priority.
Page 740: Fca Us Llc Customer Center
738 IF YOU NEED CONSUMER ASSISTANCE • Authorized dealer name facilities, factory-trained technicians, special tools, and the latest information to ensure the vehicle is fixed • Vehicle Identification Number (VIN) correctly and in a timely manner. • Vehicle delivery date and mileage This is why you should always talk to an authorized FCA US LLC Customer Center dealer service manager first.
Page 741: In Mexico Contact
IF YOU NEED CONSUMER ASSISTANCE 739 In Mexico Contact Customer Assistance For The Hearing Or Speech Impaired (TDD/TTY) Av. Prolongacion Paseo de la Reforma, 1240 To assist customers who have hearing difficulties, the Sante Fe C.P. 05109 manufacturer has installed special TDD (Telecommuni- Mexico, D.
Page 742 740 IF YOU NEED CONSUMER ASSISTANCE Warranty expires. The manufacturer stands behind only We appreciate that you have made a major investment the manufacturer’s service contracts. If you purchased a when you purchased the vehicle. An authorized dealer manufacturer’s service contract, you will receive Plan has also made a major investment in facilities, tools, and Provisions and an Owner Identification Card in the mail training to assure that you are absolutely delighted with...
Page 743: Warranty Information
IF YOU NEED CONSUMER ASSISTANCE 741 WARRANTY INFORMATION If NHTSA receives similar complaints, it may open an investigation, and if it finds that a safety defect exists in See the Warranty Information Booklet, located on the a group of vehicles, it may order a recall and remedy DVD, for the terms and provisions of FCA US LLC campaign.
Page 744: Publication Order Forms
742 IF YOU NEED CONSUMER ASSISTANCE defect to the Canadian government should contact Trans- complete working knowledge of the vehicle, system, port Canada, Motor Vehicle Defect Investigations and and/or components is written in straightforward lan- Recalls at 1-800-333-0510 or go to http://www.tc.gc.ca/ guage with illustrations, diagrams, and charts.
Page 745 IF YOU NEED CONSUMER ASSISTANCE 743 starting, operating, emergency and maintenance proce- All passenger vehicle tires must conform to Federal dures as well as specifications, capabilities and safety tips. safety requirements in addition to these grades. Call toll free at: Treadwear •...
Page 746 744 IF YOU NEED CONSUMER ASSISTANCE specified government test surfaces of asphalt and concrete. material of the tire to degenerate and reduce tire life, and A tire marked C may have poor traction performance. excessive temperature can lead to sudden tire failure. The grade C corresponds to a level of performance, which all WARNING! passenger vehicle tires must meet under the Federal...
Page 747 INDEX I n f o r ma t i o n P r o v i d e d b y :...
Page 748 746 INDEX About Your Brakes ......519 Air Bag Deployment ......66 Adaptive Cruise Control (ACC) (Cruise Control) .
Page 749 INDEX 747 Alterations/Modifications, Vehicle ....8 Fluid Type ......698, 728 Antifreeze (Engine Coolant).
Page 750 748 INDEX Brake Fluid ......728 Cargo Compartment ..... . .309 Brakes .
Page 751 INDEX 749 Installing Child Restraints Using The Vehicle Seat Contract, Service ......739 Belt ....... . .108 Coolant Pressure Cap (Radiator Cap) .
Page 752 750 INDEX Data Recorder, Event ..... . .90 Remote Keyless Entry (RKE) ....34 Daytime Brightness, Interior Lights.
Page 753 INDEX 751 Traction Control System ....526 Checking Oil Level ..... .665 Electronic Range Select (ERS) .
Page 754 752 INDEX Ethanol ......578, 581 Fuel Requirements ....581, 582 Event Data Recorder .
Page 755 INDEX 753 Fuel ........577 Gasoline (Fuel) ......577 Additives .
Page 756 754 INDEX Replacing ......720 Ignition Switch .......165 Key .
Page 757 INDEX 755 Jump Starting ......644 LaneSense ......218 Lap/Shoulder Belts.
Page 758 756 INDEX Daytime Running ..... . .168 Low Fuel ......346 Dimmer Switch, Headlight .
Page 759 INDEX 757 Locks ........34 Memory Seat ......160 Automatic Door .
Page 760 758 INDEX Octane Rating, Gasoline (Fuel)... . .577, 726 Opener, Garage Door (HomeLink) ... . .282 Oil, Engine ......665, 726 Operating Precautions .
Page 761 INDEX 759 Lift Gate ......50 Rear Camera ......280 Mirrors .
Page 762 760 INDEX Remote Control Restraints, Child ......91 Starting System ......30 Restraints, Occupant .
Page 763 INDEX 761 Lap/Shoulder Belt Untwisting ....61 Reminder ......327 Pregnant Women .
Page 764 762 INDEX Sentry Key (Immobilizer) ....17 Spare Tire ......558, 559, 560 Sentry Key Replacement .
Page 765 INDEX 763 Wheel, Tilt ......180 Tip Start....... .475 Steering Wheel Audio Controls .
Page 766 764 INDEX Replacement ......563 Trailer Sway Control (TSC) ....532 Rotation .
Page 767 INDEX 765 Transmitter, Garage Door Opener (HomeLink) ..282 Customer Programmable Features ...390 Transmitter Programming Passive Entry Programming ....390 (Remote Keyless Entry).
Page 768 766 INDEX Warning, Roll Over ......4 Power ....... .45 Warnings And Cautions .
Page 769 INSTALLATION OF RADIO TRANSMITTING EQUIPMENT Special design considerations are incorporated into this The antenna cable should be as short as practical and vehicle’s electronic system to provide immunity to radio routed away from the vehicle wiring when possible. Use frequency signals. Mobile two-way radios and telephone only fully shielded coaxial cable.
Page 770 ©2015 FCA US LLC. All Rights Reserved. I n f o r ma t i o n P r o v i d e d b y : Printed in U.S.A. Jeep is a registered trademark of FCA US LLC.

Save PDF