Jeep CHEROKEE 2016 Owner's Manual page 419

press the "+" or "–" button on the touchscreen to select
your desired time interval, and choose either 0 sec, 30 sec,
60 sec or 90 seconds.
• Headlight Illumination On Approach
When this feature is selected, the headlights will activate
and remain on for 0, 30, 60, or 90 seconds when the doors
are unlocked with the Remote Keyless Entry (RKE) Key
Fob. To change the Illuminated Approach status, press
the "+" or "–" button on the touchscreen to select your
desired time interval.
• Headlights With Wipers — If Equipped
When this feature is selected, and the headlight switch is
in the AUTO position, the headlights will turn on ap-
proximately 10 seconds after the wipers are turned on.
The headlights will also turn off when the wipers are
turned off if they were turned on by this feature. To make
your selection, press the Headlights With Wipers button
UNDERSTANDING YOUR INSTRUMENT PANEL 417
on the touchscreen, until a check-mark appears next to
setting, showing that setting has been selected.
• Auto Dim High Beams — If Equipped
When this feature is selected, the high beam headlights
will activate/deactivate automatically under certain con-
ditions. To make your selection, press the "Auto High
Beams" button on the touchscreen, until a check-mark
appears next to setting, showing that setting has been
selected. Refer to "Automatic High Beam Headlamp
Control — If Equipped" in "Understanding The Features
Of Your Vehicle" for further information.
• Daytime Running Lights — If Equipped
When this feature is selected, the headlights will turn on
whenever the vehicle is set in motion. To make your
selection, press the "Daytime Running Lights" button on
the touchscreen, until a check-mark appears next to
setting, showing that setting has been selected.
4