Possible Reasons The Engine Does Not Autostop - Jeep CHEROKEE 2016 Owner's Manual

488 STARTING AND OPERATING
Driver Information Display (DID) within the Stop/
Start section. Refer to "Electronic Vehicle Information
Center (EVIC)" or "Driver Information Display (DID)"
in "Understanding Your Instrument Panel" for further
information.
• The vehicle must be completely stopped.
• The shifter must be in a forward gear and the brake
pedal depressed.
The engine will shut down, the tachometer will move to
the zero position and the Stop/Start telltale will illumi-
nate indicating you are in Autostop. Customer settings
will be maintained upon return to an engine running
condition.

Possible Reasons The Engine Does Not Autostop

Prior to engine shut down, the system will check many
safety and comfort conditions to see if they are fulfilled.
Detailed information about the operation of the Stop/
Start system may be viewed in the EVIC/DID Stop/Start
Screen. In the following situations the engine will not
stop:
• Driver's seat belt is not buckled.
• Driver's door is not closed.
• Battery temperature is too warm or cold.
• Battery charge is low.
• The vehicle is on a steep grade.
• Cabin heating or cooling is in process and an accept-
able cabin temperature has not been achieved.
• HVAC is set to full defrost mode at a high blower
speed.
• HVAC set to MAX A/C.
• Engine has not reached normal operating temperature.