Parksense Sensors; Parksense Warning Display; Parksense Display - Jeep H6 Manual

Table of Contents

Advertisement

23_H6_OM_EN_IN_t.book Page 138
138
STARTING AND OPERATING
P
S
S
ARK
ENSE
ENSORS
The four ParkSense sensors, located in the rear
fascia/bumper, monitor the area behind the
vehicle that is within the sensors' field of view. The
sensors can detect obstacles from approximately
12 inches (30 cm) up to 79 inches (200 cm) from
the rear fascia/bumper in the horizontal direction,
depending on the location, type and orientation of
the obstacle.
P
S
W
D
ARK
ENSE
ARNING
ISPLAY
The ParkSense Warning screen will only be
displayed if "Sound and Display" is selected from
the Customer - Programmable Features section of
the Uconnect system Ú page 157.
The ParkSense Warning screen is located within
the instrument cluster display Ú page 80. It
provides visual warnings to indicate the distance
between the rear fascia/bumper and the detected
obstacle.
P
S
D
ARK
ENSE
ISPLAY
When the vehicle is in REVERSE, the instrument
cluster display will show the Park Assist system
status.
The system will indicate a detected obstacle by
showing a single arc in one or more regions based
on the obstacle's distance and location relative to
the vehicle.
If an obstacle is detected in the center rear region,
the display will show a single solid arc in the center
rear region. As the vehicle moves closer to the
obstacle, the display will show the single arc
moving closer to the vehicle and the audible chime
increases as the objects get close to the vehicle.
If an obstacle is detected in the left and/or right
rear region, the display will show a single flashing
arc in the left and/or right rear region. As the
vehicle moves closer to the obstacle, the display
will show the single arc moving closer to the
vehicle and the audible chime increases as the
objects get close to the vehicle.

Advertisement

Table of Contents
loading

Table of Contents