Download Print this page

Jeep 2016 Compass Owner's Manual

Jeep 2016 Compass Owner's Manual

Hide thumbs Also See for 2016 Compass:

User manual (148 pages)

Table of Contents

Advertisement

Quick Links

Download this manual See also: User Manual

Compass

2 0 1 6

O W N E R ' S M A N U A L

Table of Contents

Advertisement

Chapters

Table of Contents

Need help?

Need help?

Do you have a question about the 2016 Compass and is the answer not in the manual?

Questions and answers

Summary of Contents for Jeep 2016 Compass

Page 1 Compass 2 0 1 6 O W N E R ’ S M A N U A L...
Page 2 This manual illustrates and describes the operation of VEHICLES SOLD IN CANADA With respect to any Vehicles Sold in Canada, the name FCA features and equipment that are either standard or op- US LLC shall be deemed to be deleted and the name FCA tional on this vehicle.
Page 3: Introduction 3
TABLE OF CONTENTS SECTION PAGE INTRODUCTION ............. . . 3 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE .
Page 5 INTRODUCTION CONTENTS INTRODUCTION ......4 VEHICLE IDENTIFICATION NUMBER ..7 ROLLOVER WARNING ....4 VEHICLE MODIFICATIONS/ALTERATIONS .
Page 6: Introduction
4 INTRODUCTION INTRODUCTION When it comes to service, remember that your authorized dealer knows your Jeep® vehicle best, has factory-trained Congratulations on selecting your new FCA US LLC technicians and genuine MOPAR® parts, and cares about vehicle. Be assured that it represents precision workman- your satisfaction.
Page 7: How To Use This Manual
INTRODUCTION 5 control. Failure to operate this vehicle safely may result seat belts could cut the highway death toll by 10,000 or in a collision, rollover of the vehicle, and severe or fatal more each year and could reduce disabling injuries by injury.
Page 8 6 INTRODUCTION...
Page 9: Warnings And Cautions
INTRODUCTION 7 WARNINGS AND CAUTIONS This Owner’s Manual contains WARNINGS against operating procedures that could result in a collision or bodily injury. It also contains CAUTIONS against proce- dures that could result in damage to your vehicle. If you do not read this entire Owner’s Manual, you may miss important information.
Page 10: Vehicle Modifications/Alterations
8 INTRODUCTION VEHICLE MODIFICATIONS/ALTERATIONS WARNING! Any modifications or alterations to this vehicle could seriously affect its roadworthiness and safety and may lead to a collision resulting in serious injury or death. Right Front Body VIN Location NOTE: It is illegal to remove or alter the VIN.
Page 11: Table Of Contents
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE CONTENTS ▫ To Arm The System ....18 A WORD ABOUT YOUR KEYS ... . .12 ▫...
Page 12 10 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE ▫ To Lock The Doors And Liftgate ... .22 ▫ To Exit Remote Start Mode Without Driving The Vehicle ......29 ▫...
Page 13 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 11 LIFTGATE ......39 SAFETY TIPS ......97 ▫...
Page 14: A Word About Your Keys
12 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE A WORD ABOUT YOUR KEYS Ignition Key Removal The authorized dealer that sold you your new vehicle has 1. Place the shift lever in PARK (if equipped with an the key code numbers for your vehicle locks. These automatic transmission).
Page 15 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 13 NOTE: If you try to remove the key before you place the shift lever in PARK, the key may become trapped tem- porarily in the ignition switch cylinder. If this occurs, place the shift lever in PARK, rotate the key clockwise slightly, and then remove the key as described above.
Page 16: Locking Doors With A Key
14 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Locking Doors With A Key WARNING! (Continued) You can insert the key with either side up. To lock the • Allowing children to be in a vehicle unattended is door, turn the key to the right. To unlock the door, turn dangerous for a number of reasons.
Page 17: Sentry Key
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 15 SENTRY KEY During normal operation, after turning on the ignition switch, the Vehicle Security Light will turn on for three The Sentry Key Immobilizer System prevents unauthor- seconds for a bulb check. If the light remains on after the ized vehicle operation by disabling the engine.
Page 18: Replacement Keys
16 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE CAUTION! CAUTION! The Sentry Key Immobilizer system is not compat- Always remove the Sentry Keys from the vehicle and ible with some aftermarket remote starting systems. lock all doors when leaving the vehicle unattended. Use of these systems may result in vehicle starting Duplication of keys may be performed at an authorized problems and loss of security protection.
Page 19: Customer Key Programming
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 17 Customer Key Programming 4. Insert a blank Sentry Key into the ignition switch. Turn the ignition switch to the ON/RUN position within 60 If you have two valid Sentry Keys, you can program new seconds.
Page 20: General Information
18 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: If a programmed key is lost, see your authorized NOTE: Changes or modifications not expressly approved dealer to have all remaining keys erased from the sys- by the party responsible for compliance could void the tem’s memory.
Page 21: Rearming The System
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 19 2. Lock the door using either the power door LOCK To Disarm The System switch or the Remote Keyless Entry (RKE) transmitter Push UNLOCK on the RKE transmitter, or insert the key and close all doors.
Page 22: Vehicle Security Alarm Manual Override
20 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Vehicle Security Alarm Manual Override The Vehicle Security Alarm will not arm if you lock the doors using the manual door lock plunger. REMOTE KEYLESS ENTRY (RKE) — IF EQUIPPED This system allows you to lock or unlock the doors and liftgate or activate the Panic Alarm from distances up to approximately 66 ft (20 m) using a hand-held Remote Keyless Entry (RKE) transmitter.
Page 23: To Unlock The Doors And Liftgate
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 21 • For vehicles not equipped with the EVIC, perform the To Unlock The Doors And Liftgate following steps: Push and release the UNLOCK button on the RKE transmitter once to unlock the driver’s door or twice 1.
Page 24: Illuminated Approach - If Equipped
22 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: Pushing the LOCK button on the RKE transmitter To Lock The Doors And Liftgate while you are inside the vehicle will activate the Vehicle Push and release the LOCK button on the RKE transmit- Security Alarm.
Page 25: Flash Lights With Remote Key Lock/Unlock
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 23 • For vehicles not equipped with the EVIC, perform the NOTE: Pushing the LOCK button on the RKE transmitter following steps: while you are in the vehicle will activate the Vehicle Security Alarm. Opening a door with the Vehicle Security 1.
Page 26: Using The Panic Alarm
24 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • For vehicles not equipped with the EVIC, perform the NOTE: Pushing the LOCK button on the RKE transmitter following steps: while you are in the vehicle will activate the Vehicle Security Alarm. Opening a door with the Vehicle Security 1.
Page 27: Programming Additional Transmitters
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 25 NOTE: When you turn off the Panic Alarm by pushing two halves of the RKE transmitter apart. Make sure the PANIC button a second time, you may have to move not to damage the elastomer seal during removal. closer to the vehicle due to the radio frequency noises of the system.
Page 28: General Information
26 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 3. To reassemble the RKE transmitter case, snap the two NOTE: Changes or modifications not expressly approved halves together. by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: If the RKE transmitter is equipped with a screw, reinstall and tighten the screw until snug.
Page 29: How To Use Remote Start
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 27 How To Use Remote Start WARNING! All of the following conditions must be met before the • Do not start or run an engine in a closed garage or engine will remote start: confined area.
Page 30: To Enter Remote Start
28 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • Remote Start Aborted — Hood Ajar NOTE: • Remote Start Aborted — L/Gate Ajar • The park lamps will turn on and remain on during Remote Start mode. • Remote Start Aborted — Fuel Low •...
Page 31: To Exit Remote Start Mode Without Driving The Vehicle
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 29 • Any engine warning lamps come on. To Exit Remote Start Mode And Drive The Vehicle • Low Fuel Light turns on. Before the end of the 15-minute cycle, push and release the UNLOCK button on the RKE transmitter to unlock •...
Page 32: Door Locks
30 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 2. This device must accept any interference received, including interference that may cause undesired op- eration. NOTE: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Page 33: Power Door Locks
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 31 Power Door Locks WARNING! (Continued) A power door lock switch is located on the driver’s and • Never leave children alone in a vehicle, or with front passenger’s door panel. Push this switch to lock or access to an unlocked vehicle.
Page 34 32 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Auto Lock Doors — If Equipped The auto door lock feature default condition is enabled. When enabled, the door locks will lock automatically when the vehicle’s speed exceeds 15 mph (24 km/h). Auto Lock Doors Programming The Automatic Door Locks feature can be enabled or disabled as follows:...
Page 35 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 33 2. Within 15 seconds, cycle the ignition switch be- Automatic Unlock Doors On Exit tween LOCK and ON/RUN and then back to The doors will unlock automatically if: LOCK four times, ending up in the LOCK position •...
Page 36: Child-Protection Door Lock System - Rear Doors
34 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Personal Settings (Customer-Programmable Features)” in NOTE: “Understanding Your Instrument Panel” for further infor- • If you do not hear the chime, it means that the system mation. did not enter the programming mode and you will •...
Page 37 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 35 3. Repeat steps 1 and 2 for the opposite rear door. Child-Protection Door Lock Function Child-Protection Door Lock Location WARNING! Avoid trapping anyone in a vehicle in a collision. Remember that the rear doors can only be opened from the outside when the Child-Protection locks are engaged.
Page 38: Power Windows - If Equipped
36 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: For emergency exit with the system engaged, NOTE: move the lock knob up (unlocked position), roll down the • For vehicles not equipped with the Electronic Vehicle window, and open the door with the outside door Information Center (EVIC), the power window handle.
Page 39: Auto-Down
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 37 WARNING! Never leave children unattended in a vehicle, and do not let children play with power windows. Do not leave the Key Fob in or near the vehicle, or in a location accessible to children. Occupants, particu- larly unattended children, can become entrapped by the windows while operating the power window switches.
Page 40: Window Lockout Switch
38 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Window Lockout Switch The window lockout switch on the driver’s door allows you to disable the window controls on the rear passenger doors. To disable the window controls on the rear pas- senger doors, push the window LOCKOUT switch.
Page 41: Liftgate
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 39 LIFTGATE NOTE: The key that is used to start the vehicle is also used to lock or unlock the doors and open the liftgate. To unlock the liftgate, insert the key into the lock and turn it to the right (manual lock models only).
Page 42: Occupant Restraint Systems
40 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • Although the liftgate has no inside release mechanism, Gas props support the liftgate in the open position. the liftgate trim panel includes an opening with a However, because the gas pressure drops with tempera- snap-in cap that provides access to release the latch in ture, it may be necessary to assist the props when the event of an electrical system malfunction.
Page 43: Important Safety Precautions
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 41 Important Safety Precautions restraints or belt-positioning booster seats. Older chil- dren who do not use child restraints or belt- Please pay close attention to the information in this positioning booster seats should ride properly buckled section.
Page 44: Seat Belt Systems
42 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE side air bags will inflate forcefully into the space Seat Belt Systems between occupants and the door and occupants could Buckle up even though you are an excellent driver, even be injured. on short trips.
Page 45 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 43 Driver And Passenger BeltAlert (If Equipped) BeltAlert Warning Sequence BeltAlert is a feature intended to remind the driver The BeltAlert warning sequence is activated when the and outboard front seat passenger (if equipped with vehicle is moving above a specified vehicle speed range outboard front passenger seat BeltAlert) to buckle and the driver or outboard front seat passenger is un-...
Page 46 44 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Change Of Status NOTE: If BeltAlert has been deactivated and the driver or outboard front seat passenger (if equipped with out- If the driver or outboard front seat passenger (if board front passenger seat BeltAlert) is unbuckled the equipped with outboard front passenger seat BeltAlert) Seat Belt Reminder Light will turn on and remain on until unbuckles their seat belt while the vehicle is traveling,...
Page 47 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 45 WARNING! WARNING! (Continued) • Do not allow people to ride in any area of your • Relying on the air bags alone could lead to more vehicle that is not equipped with seats and seat severe injuries in a collision.
Page 48 46 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! (Continued) WARNING! (Continued) • A lap belt worn too high can increase the risk of • A seat belt that is too loose will not protect you injury in a collision. The seat belt forces won’t be at properly.
Page 49 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 47 2. The seat belt latch plate is above the back of the front WARNING! (Continued) seat, and next to your arm in the rear seat (for vehicles • A frayed or torn seat belt could rip apart in a equipped with a rear seat).
Page 50 48 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 3. When the seat belt is long enough to fit, insert the latch 4. Position the lap belt so that it is snug and lies low plate into the buckle until you hear a “click.” across your hips, below your abdomen.
Page 51 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 49 5. Position the shoulder belt across the shoulder and Lap/Shoulder Belt Untwisting Procedure chest with minimal, if any slack so that it is comfort- Use the following procedure to untwist a twisted lap/ able and not resting on your neck.
Page 52 50 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Adjustable Upper Shoulder Belt Anchorage As a guide, if you are shorter than average, you will prefer the shoulder belt anchorage in a lower position, In the driver and front passenger seats, the top of the and if you are taller than average, you will prefer the shoulder belt can be adjusted upward or downward to shoulder belt anchorage in a higher position.
Page 53 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 51 Second Row Center Seat Belt Operating Instructions The second row center seat belt features a seat belt with a mini-latch plate and buckle, which allows the seat belt to detach from the lower anchor when the seat is folded. The mini-latch plate and regular latch plate can then be stored out of the way in the right side trim panel for added convenience to open up utilization of the storage...
Page 54 52 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 4. When the seat belt is long enough to fit, insert the mini-latch plate into the mini-buckle until you hear a “click.” 5. Sit back in seat. Slide the regular latch plate up the webbing as far as necessary to allow the seat belt to go around your lap.
Page 55 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 53 position. If necessary, slide the latch plate down the WARNING! webbing to allow the seat belt to retract fully. Insert • If the mini-latch plate and mini-buckle are not the mini-latch plate and regular latch plate into its stowed position.
Page 56 54 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Seat Belt Extender. The Seat Belt Extender should be used Seat Belts And Pregnant Women only if the existing seat belt is not long enough. When the Seat Belt Extender is not required for a different occu- pant, it must be removed.
Page 57 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 55 Position the lap belt snug and low below the abdomen The pretensioners are triggered by the Occupant Re- and across the strong bones of the hips. Place the straint Controller (ORC). Like the air bags, the preten- shoulder belt across the chest and away from the neck.
Page 58 56 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE For additional information, refer to “Installing Child If the passenger seating position is equipped with an Restraints Using The Vehicle Seat Belt” under the “Child ALR and is being used for normal usage, only pull the Restraints”...
Page 59 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 57 How To Disengage The Automatic Locking Mode WARNING! Unbuckle the combination lap/shoulder belt and allow it • Never place a rear-facing child restraint in front of to retract completely to disengage the Automatic Locking an air bag.
Page 60 58 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE How The Active Head Restraints (AHR) Work WARNING! (Continued) The Occupant Restraint Controller (ORC) determines • Do not use the Automatic Locking Mode to restrain whether the severity, or type of rear impact will require occupants who are wearing the seat belt or children the Active Head Restraints (AHR) to deploy.
Page 61 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 59 WARNING! • All occupants, including the driver, should not operate a vehicle or sit in a vehicle’s seat until the head restraints are placed in their proper positions in order to minimize the risk of neck injury in the event of a collision.
Page 62 60 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE US LLC dealer must reset the AHRs on the driver’s and WARNING! (Continued) front passenger’s seat before driving. Personally attempt- as loose cargo could contact the Active Head Re- ing to reset the AHRs may result in damage to the AHRs straint during sudden stops.
Page 63: Supplemental Restraint System (Srs)
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 61 • Supplemental Side Air Bags WARNING! • Front and Side Impact Sensors Deployed AHRs are not able to best protect you in all • Seat Belt Pretensioners types of collisions. Have deployed AHRs reset by an authorized dealer immediately.
Page 64 62 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! • Being too close to the steering wheel or instrument panel during Advanced Front Air Bag deployment could cause serious injury, including death. Air bags need room to inflate. Sit back, comfortably extending your arms to reach the steering wheel or instrument panel.
Page 65 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 63 Advanced Front Air Bag Features the driver or front passenger seat belt is buckled. The seat belt buckle switch may adjust the inflation rate of the The Advanced Front Air Bag system has multistage Advanced Front Air Bags.
Page 66 64 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE On the other hand, depending on the type and location of WARNING! (Continued) impact, Advanced Front Air Bags may deploy in crashes • Relying on the air bags alone could lead to more with little vehicle front-end damage but that produce a severe injuries in a collision.
Page 67 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 65 The steering wheel hub trim cover and the upper right Supplemental Side Air Bags side of the instrument panel separate and fold out of the Your vehicle is equipped with two types of side air bags: way as the air bags inflate to their full size.
Page 68 66 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE The SABs may help to reduce the risk of occupant injury 2. Supplemental Side Air Bag Inflatable Curtains during certain side impacts and/or vehicle rollover (SABICs): Located above the side windows. The trim events, in addition to the injury reduction potential covering the SABICs is labeled “SRS AIRBAG”...
Page 69 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 67 SABICs may help reduce the risk of head or other injuries WARNING! to front and rear seat outboard occupants in certain side • Your vehicle is equipped with left and right impacts and/or vehicle rollover events, in addition to the injury reduction potential provided by the seat belts and Supplemental Side Air Bag Inflatable Curtains body structure.
Page 70 68 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE The SABICs and SABs (“Side Air Bags”) are designed to Seat belts (and child restraints where appropriate) are activate in certain side impacts and certain rollover necessary for your protection in all collisions. They also events.
Page 71 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 69 deploys the left Side Air Bags only and a right side WARNING! (Continued) impact deploys the right Side Air Bags only. • Relying on the Side Air Bags alone could lead to The Side Air Bags will not deploy in all side collisions, more severe injuries in a collision.
Page 72 70 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE The Side Air Bags will not deploy in all rollover events. If you do have a collision which deploys the air bags, any The rollover sensing-system determines if a rollover or all of the following may occur: event may be in progress and whether deployment is •...
Page 73 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 71 • After any collision, the vehicle should be taken to an continues, see your doctor. If these particles settle on your clothing, follow the garment manufacturer’s in- authorized dealer immediately. structions for cleaning. Enhanced Accident Response System Do not drive your vehicle after the air bags have de- In the event of an impact, if the communication network...
Page 74 72 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Enhanced Accident Response System Reset the OFF position or in the ACC position, the air bag Procedure system is not on and the air bags will not inflate. In order to reset the Enhanced Accident Response System The ORC contains a backup power supply system that functions after an event, the ignition switch must be may deploy the air bags even if the battery loses power or...
Page 75 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 73 While the air bag system is designed to be maintenance WARNING! free, if any of the following occurs, have an authorized dealer service the air bag system immediately. Ignoring the Air Bag Warning Light in your instru- ment panel could mean you won’t have the air bags •...
Page 76 74 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! (Continued) WARNING! (Continued) seat attachment bolts), take the vehicle to your protect you. Do not modify the components or authorized dealer. Only manufacturer approved wiring, including adding any kind of badges or stickers to the steering wheel hub trim cover or the seat accessories may be used.
Page 77: Child Restraints
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 75 • Whether or not the driver and passenger safety belts In addition to the vehicle manufacturer, other parties, were buckled/fastened; such as law enforcement, that have the special equip- ment, can read the information if they have access to the •...
Page 78 76 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Before buying any restraint system, make sure that it has WARNING! a label certifying that it meets all applicable Safety Standards. You should also make sure that you can install In a collision, an unrestrained child can become a it in the vehicle where you will use it.
Page 79 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 77 Summary Of Recommendations For Restraining Children In Vehicles Child Size, Height, Weight Or Age Recommended Type Of Child Restraint Infants and Toddlers Children who are two years old or Either an Infant Carrier or a Convertible younger and who have not reached the Child Restraint, facing rearward in the height or weight limits of their child...
Page 80 78 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Infants And Child Restraints WARNING! Safety experts recommend that children ride rear-facing • Never place a rear-facing child restraint in front of in the vehicle until they are two years old or until they an air bag.
Page 81 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 79 remain in a forward-facing child seat with a harness for WARNING! (Continued) as long as possible, up to the highest weight or height directions exactly when installing an infant or allowed by the child seat. child restraint.
Page 82 80 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Children Too Large For Booster Seats 5. Can the child stay seated like this for the whole trip? Children who are large enough to wear the shoulder belt If the answer to any of these questions was “no,” then the comfortably, and whose legs are long enough to bend child still needs to use a booster seat in this vehicle.
Page 83 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 81 Recommendations For Attaching Child Restraints Restraint Type Combined Use any attachment method shown with an “X” Below Weight of the LATCH – Seat Belt Only LATCH – Seat Belt + Top Child + Child Lower Anchors Lower Anchors Tether Anchor...
Page 84 82 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Lower Anchors And Tethers For CHildren Your vehicle is equipped with the child restraint anchor- (LATCH) Restraint System age system called LATCH, which stands for Lower Anchors and Tethers for CHildren. The LATCH system has three vehicle anchor points for installing LATCH- equipped child seats.
Page 85 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 83 LATCH Positions For Installing Child Restraints In This Vehicle • Lower Anchorage Symbol 2 anchorages per seating position • Top Tether Anchorage Symbol...
Page 86 84 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Frequently Asked Questions About Installing Child Seats With LATCH What is the weight limit 65 lbs (29.5 kg) Use the LATCH anchorage system until the (child’s weight + weight of the combined weight of the child and the child child restraint) for using the restraint is 65 lbs (29.5 kg).
Page 87 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 85 Frequently Asked Questions About Installing Child Seats With LATCH Can two child restraints be at- Never “share” a LATCH anchorage with tached using a common lower two or more child restraints. If the center LATCH anchorage? position does not have dedicated LATCH lower anchorages, use the seat belt to in-...
Page 88 86 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Locating LATCH Anchorages The lower anchorages are round bars that are found at the rear of the seat cushion where it meets the seatback. They are just visible when you lean into the rear seat to install the child restraint.
Page 89 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 87 Locating Tether Anchorages There are tether strap anchorages behind each rear seating position located on the back of the seat. LATCH-compatible child restraint systems will be equipped with a rigid bar or a flexible strap on each side. Each will have a hook or connector to attach to the lower anchorage and a way to tighten the connection to the anchorage.
Page 90 88 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE restraints with flexible, webbing mounted lower attach- To Install A LATCH-Compatible Child Restraint ments can be installed in any rear seating position. If the selected seating position has a Switchable Auto- matic Locking Retractor (ALR) seat belt, stow the seat WARNING! belt, following the instructions below.
Page 91 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 89 3. Attach the lower hooks or connectors of the child How To Stow An Unused ALR Seat Belt: restraint to the lower anchorages in the selected seat- When using the LATCH attaching system to install a ing position.
Page 92 90 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Installing Child Restraints Using The Vehicle Seat WARNING! Belt • Improper installation of a child restraint to the The seat belts in the passenger seating positions are LATCH anchorages can lead to failure of the re- equipped with a Switchable Automatic Locking Retractor straint.
Page 93 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 91 Lap/Shoulder Belt Systems For Installing Child Restraints In This Vehicle • ALR = Switchable Automatic Locking Retractor • Top Tether Anchorage Symbol...
Page 94 92 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Frequently Asked Questions About Installing Child Restraints With Seat Belts What is the weight limit (child’s Weight limit of the Always use the tether anchor when using the seat weight + weight of the child re- Child Restraint belt to install a forward facing child restraint, up to straint) for using the Tether Anchor...
Page 95 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 93 Installing A Child Restraint With A Switchable 4. Pull on the webbing to make the lap portion tight Automatic Locking Retractor (ALR) against the child seat. 1. Place the child seat in the center of the seating 5.
Page 96 94 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 8. If the child restraint has a top tether strap and the Installing Child Restraints Using The Top Tether seating position has a top tether anchorage, connect Anchorage: the tether strap to the anchorage and tighten the tether strap.
Page 97 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 95 1. Look behind the seating position where you plan to install the child restraint to find the tether anchorage. You may need to move the seat forward to provide better access to the tether anchorage. If there is no top tether anchorage for that seating position, move the child restraint to another position in the vehicle if one is available.
Page 98: Transporting Pets
96 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE ENGINE BREAK-IN RECOMMENDATIONS WARNING! A long break-in period is not required for the engine and • An incorrectly anchored tether strap could lead to drivetrain (transmission and axle) in your vehicle. increased head motion and possible injury to the Drive moderately during the first 300 miles (500 km).
Page 99: Safety Tips
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 97 CAUTION! WARNING! • Do not leave children or animals inside parked Never use Non-Detergent Oil or Straight Mineral Oil in the engine or damage may result. vehicles in hot weather. Interior heat build-up may cause serious injury or death.
Page 100: Exhaust Gas
98 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Exhaust Gas WARNING! (Continued) • If it is necessary to sit in a parked vehicle with the WARNING! engine running, adjust your heating or cooling Exhaust gases can injure or kill. They contain carbon controls to force outside air into the vehicle.
Page 101: Safety Checks You Should Make Inside The Vehicle
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 99 Safety Checks You Should Make Inside The during starting, stays on, or turns on while driving, Vehicle have the system inspected at an authorized dealer as soon as possible. This light will illuminate with a Seat Belts single chime when a fault with the Air Bag Warning Inspect the seat belt system periodically, checking for...
Page 102 100 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Floor Mat Safety Information WARNING! (Continued) Always use floor mats designed to fit the footwell of your • Never put floor mats or other floor coverings on top vehicle. Use only floor mats that leave the pedal area of already installed floor mats.
Page 103: Periodic Safety Checks You Should Make Outside
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 101 Periodic Safety Checks You Should Make Outside Door Latches The Vehicle Check for proper closing, latching, and locking. Tires Fluid Leaks Examine tires for excessive tread wear and uneven wear Check area under vehicle after overnight parking for fuel, patterns.
Page 105: Understanding The Features Of Your Vehicle
UNDERSTANDING THE FEATURES OF YOUR VEHICLE CONTENTS ▫ Sun Visor “Slide-On-Rod” Feature — MIRRORS ......108 If Equipped .
Page 106 104 UNDERSTANDING THE FEATURES OF YOUR VEHICLE ▫ Folding Rear Seat .....160 VOICE COMMAND — IF EQUIPPED ..143 ▫...
Page 107 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 105 ▫ Headlights On With Wipers (Available With ▫ To Activate ......176 Automatic Headlights Only) .
Page 108 106 UNDERSTANDING THE FEATURES OF YOUR VEHICLE ▫ Using HomeLink .....188 ▫ Sunroof Maintenance ....193 ▫...
Page 109 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 107 ▫ Cargo Tie-Down Loops ....205 ▫ Rear Window Defroster ....208 ▫...
Page 110: Mirrors
108 UNDERSTANDING THE FEATURES OF YOUR VEHICLE MIRRORS Inside Day/Night Mirror A two-point pivot system allows for horizontal and vertical mirror adjustment. Adjust the mirror to center on the view through the rear window. Headlight glare can be reduced by moving the small control under the mirror to the night position (toward the rear of vehicle).
Page 111: Outside Mirror - Driver Side
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 109 NOTE: This feature is disabled when the vehicle is CAUTION! moving in reverse. To avoid damage to the mirror during cleaning, never spray any cleaning solution directly onto the mirror. Apply the solution onto a clean cloth and wipe the mirror clean.
Page 112: Folding Outside Mirrors
110 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Power Mirrors WARNING! The power mirror control is located on the driver’s door Vehicles and other objects seen in the passenger side trim panel. convex mirror will look smaller and farther away than they really are. Relying too much on your passenger side convex mirror could cause you to collide with another vehicle or other object.
Page 113: Heated Mirrors - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 111 When you are finished adjusting the mirror, turn the control to the center position to prevent accidentally moving a mirror. Heated Mirrors — If Equipped These mirrors are heated to melt frost or ice. This feature is activated whenever you turn on the rear window defroster.
Page 114: Uconnect Phone - If Equipped
112 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Uconnect PHONE — IF EQUIPPED Uconnect Phone allows you to transfer calls between the system and your mobile phone as you enter or exit your Uconnect Phone is a voice-activated, hands-free, in- vehicle and enables you to mute the system’s microphone vehicle communications system.
Page 115 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 113 Voice Command Button WARNING! Actual button location may vary with the ra- Any voice commanded system should be used only dio. The individual buttons are described in the in safe driving conditions following all applicable “Operation”...
Page 116: Operation
114 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Operation part of the command when you are asked for it. For example, you can use the compound form voice com- Voice commands can be used to operate the Uconnect mand “Phonebook New Entry,” or you can break the Phone and to navigate through the Uconnect Phone compound form command into two voice commands: menu structure.
Page 117 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 115 To activate the Uconnect Phone, simply push the Phone The following are general phone to Uconnect Phone button and follow the audible prompts for direc- pairing instructions: tions. Uconnect Phone sessions begin with a push of 1.
Page 118 116 UNDERSTANDING THE FEATURES OF YOUR VEHICLE For identification purposes, you will be prompted to give Dial By Saying A Number the Uconnect Phone a name for your mobile phone. Each • Push the Phone button to begin. mobile phone that is paired should be given a unique •...
Page 119 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 117 • The system will prompt you to say the name of the To add names to the Uconnect phonebook using Voice person you want to call. Commands: • After the “Ready” prompt and the following beep, say 1.
Page 120 118 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • To call a name from the Uconnect Phonebook or After you are finished adding an entry into the phonebook, you will be given the opportunity to add more phone downloaded Phonebook, follow the procedure in “Call numbers to the current entry or to return to the main menu.
Page 121 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 119 • Either the mobile phone’s phonebook or the mobile • Next, choose the number designation (home, work, phone’s SIM card phonebook is downloaded. mobile, or other) that you wish to edit. • This downloaded phonebook cannot be edited or •...
Page 122 120 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To delete a Uconnect phonebook entry using Voice Com- 4. After you enter the name, the Uconnect Phone will ask mands: you which designation you wish to delete: home, work, mobile, other, or all. Say the designation you 1.
Page 123: Phone Call Features
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 121 3. After confirmation, the phonebook entries will be 3. To call one of the names in the list, push the Voice deleted. Command button during the playing of the desired name, and say “Call.” NOTE: NOTE: The user can also exercise “Edit”...
Page 124 122 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Answer Or Reject An Incoming Call — No Call NOTE: The Uconnect Phone compatible phones in the Currently In Progress market today do not support rejecting an incoming call when another call is in progress. Therefore, the user can When you receive a call on your mobile phone, the only answer an incoming call or ignore it.
Page 125 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 123 Place/Retrieve A Call From Hold Conference Call To put a call on hold: When two calls are in progress (one active and one on hold): 1. Push the Phone button until you hear a single beep.
Page 126 124 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • The Uconnect Phone will call the last number that Call Termination was dialed from your mobile phone. To end a call in progress: NOTE: This may not be the last number dialed from the 1.
Page 127: Uconnect Phone Features
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 125 2. After the ignition is cycled to OFF, a call can continue After selecting one of the languages, all prompts and on the Uconnect Phone for a certain duration, after voice commands will be in that language. which the call is automatically transferred from the NOTE: After every Uconnect Phone language change Uconnect Phone to the mobile phone.
Page 128 126 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • After the “Ready” prompt and the following beep, say WARNING! “Emergency” and the Uconnect Phone will instruct the paired mobile phone to call the emergency number. To use your Uconnect Phone System in an emergency, This feature is supported in the U.S., Canada, and your mobile phone must be: •...
Page 129 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 127 NOTE: You should program the desired Towing Assis- Working With Automated Systems tance phone number using the Voice Command system. This method is used in instances where one generally has To do this, push the Phone button and say “Setup,”...
Page 130 128 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • Some paging and voice mail systems have system time used for navigating through an automated customer service center menu structure, and to leave a number out settings that are too short and may not allow the on a pager.
Page 131 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 129 2. After the “Ready” prompt and the following beep, say dialing a number with your paired Bluetooth mobile one of the following: phone, the audio will be played through your vehicle’s audio system. The Uconnect Phone will work the same as •...
Page 132: Advanced Phone Connectivity
130 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • Following the beep, say “Mute.” Connect Or Disconnect Link Between The Uconnect Phone And Mobile Phone To un-mute the Uconnect Phone: Your mobile phone can be paired with many different • Push the Voice Command button.
Page 133 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 131 • The Uconnect Phone will play the phone names of all • The selected phone will be used for the next phone paired mobile phones in order from the highest to the call. If the selected phone is not available, the Uconnect lowest priority.
Page 134: Things You Should Know About Your Uconnect
132 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Things You Should Know About Your Uconnect You can either push the Uconnect Phone button to restore Phone the factory setting or repeat the words and phrases when prompted by the Uconnect Phone. For best results, the Uconnect Phone Tutorial Voice Training session should be completed when the To hear a brief tutorial of the system features, push the...
Page 135 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 133 • Smooth road surface Voice Command • Fully closed windows For best performance: • Adjust the rearview mirror to provide at least ½ inch • Dry weather condition (1 cm) gap between the overhead console (if equipped) NOTE: and the mirror.
Page 136 134 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • Phonebook (Downloaded and Uconnect Phone Local) • Fully Closed Windows name recognition rate is optimized when the entries • Dry Weather Conditions are not similar. • Operation From The Driver’s Seat • Numbers must be spoken in single digits. “800” must •...
Page 137 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 135 Read Messages: 2. After the “Ready” prompt and the following beep, say “SMS Send” or “Send Message.” If you receive a new text message while your phone is connected to Uconnect Phone, an announcement will be 3.
Page 138 136 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 6. Why? 19. Send number to call. 7. I love you. 20. Start without me. 8. Call me. Turn Voice Text Reply Incoming Announcement ON/ 9. Call me later. Turning the Voice Text Reply Incoming Announcement 10.
Page 139 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 137 Bluetooth Communication Link Power-Up Mobile phones have been found to lose connection to the After switching the ignition key from OFF to either the Uconnect Phone. When this happens, the connection can ON or ACC position, or after a language change, you generally be reestablished by switching the phone off/ must wait at least 15 seconds prior to using the system.
Page 140 138 UNDERSTANDING THE FEATURES OF YOUR VEHICLE...
Page 141 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 139...
Page 142 140 UNDERSTANDING THE FEATURES OF YOUR VEHICLE...
Page 143 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 141 Voice Commands Primary Alternate (s) Primary Alternate (s) zero call cancel confirmation prompts three continue four delete five dial download seven edit eight emergency nine English star (*) erase all plus (+) Espanol pound (#) Francais add location...
Page 144 142 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Primary Alternate (s) Primary Alternate (s) home redial language return to main menu return or main menu list names select phone select list phones send mobile set up phone settings or phone set up mute towing assistance mute off...
Page 145: General Information
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 143 General Information VOICE COMMAND — IF EQUIPPED This device complies with Part 15 of the FCC rules and Voice Command System Operation RSS 210 of Industry Canada. Operation is subject to the following conditions: The Uconnect Voice Command system allows •...
Page 146 144 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Pushing the Voice Command button while the sys- WARNING! tem is speaking is known as “barging in.” The system will be interrupted, and after the beep, you can add or Any voice commanded system should be used only change commands.
Page 147: Commands
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 145 To hear the first available Menu, push the Voice Com- 3. Use the ON/OFF VOLUME rotary knob to adjust the mand button and say “Help” or “Main Menu.” volume to a comfortable level while the Voice Com- mand system is speaking.
Page 148 146 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • “Bluetooth Streaming” (to switch to Bluetooth Stream- Radio FM ing mode) To switch to the FM band, say “FM” or “Radio FM.” In • “Memo” (to switch to the memo recorder) this mode, you may say the following commands: •...
Page 149 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 147 • “Previous Channel” (to select the previous channel) USB Mode • “List Channel” (to hear a list of available channels) To switch to USB mode, say “USB.” In this mode, you may say the following commands: •...
Page 150 148 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Memo Mode – “Previous” (to play the previous memo) To switch to the voice recorder mode, say “Memo.” In – “Delete” (to delete a memo) this mode, you may say the following commands: –...
Page 151: Voice Training
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 149 • “Tutorial” 2. Repeat the words and phrases when prompted by Uconnect Voice. For best results, the “Voice Training” • “Voice Training” session should be completed when the vehicle is NOTE: Keep in mind that you have to push the Voice parked, engine running, all windows closed, and the Command button first and wait for the beep before...
Page 152: Power Seats - If Equipped
150 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! (Continued) • Do not allow people to ride in any area of your vehicle that is not equipped with seats and seat belts. In a collision, people riding in these areas are more likely to be seriously injured or killed.
Page 153 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 151 Adjusting The Seat Forward Or Rearward WARNING! The seat can be adjusted both forward and rearward. • Adjusting a seat while driving may be dangerous. Push the seat switch forward or rearward. The seat will Moving a seat while driving could result in loss of move in the direction of the switch.
Page 154: Heated Seats - If Equipped
152 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Heated Seats — If Equipped minutes of continuous operation. At that time, the dis- play will change from HI to LO, indicating the change. On some models, the front driver and passenger seats When the LO-level heating is selected, the system auto- may be equipped with heaters in both the seat cushions matically turns the heater and the indicator light OFF...
Page 155: Manual Front Seat Adjustment
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 153 WARNING! (Continued) • Do not place anything on the seat or seatback that insulates against heat, such as a blanket or cushion. This may cause the seat heater to overheat. Sitting in a seat that has been overheated could cause serious burns due to the increased surface tempera- ture of the seat.
Page 156: Manual Seat Height Adjustment - If Equipped
154 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Manual Seat Height Adjustment — If Equipped WARNING! The driver’s seat height can be raised or lowered by using • Adjusting a seat while driving may be dangerous. a lever, located on the outboard side of the seat. Pull Moving a seat while driving could result in loss of upward on the lever to raise the seat height or push control which could cause a collision and serious...
Page 157: Manual Lumbar - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 155 Manual Lumbar — If Equipped Driver’s Seatback Recline The lumbar adjustment handle is located on the inboard To adjust the seatback, lift the lever located on the or outboard side of the seatback. Rotate the lever down- outboard side of the seat, lean back to the desired angle ward to increase the lumbar support or rotate the lever and release the lever.
Page 158: Head Restraints
156 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! WARNING! The head restraints for all occupants must be prop- Do not ride with the seatback reclined so that the erly installed and adjusted prior to operating the shoulder belt is no longer resting against your chest. vehicle or occupying a seat.
Page 159 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 157 When AHRs deploy during a rear impact, the front half of the head restraint extends forward to minimize the gap between the back of the occupant’s head and the AHR. This system is designed to help prevent or reduce the extent of injuries to the driver and front passenger in certain types of rear impacts.
Page 160 158 UNDERSTANDING THE FEATURES OF YOUR VEHICLE For comfort the Active Head Restraints can be tilted forward and backward. To tilt the head restraint closer to the back of your head, pull forward on the bottom of the head restraint. Push rearward on the bottom of the head restraint to move the head restraint away from your head.
Page 161 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 159 • In the event of deployment of an Active Head Re- WARNING! (Continued) straint, refer to “Occupant Restraints/Resetting Active • Active Head Restraints may be deployed if they are Head Restraints (AHR)” in “Things To Know Before struck by an object such as a hand, foot or loose Starting Your Vehicle”...
Page 162: Folding Rear Seat
160 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Folding Rear Seat To provide additional storage area, each rear seatback can be folded forward. Pull the strap forward to fold the rear seatback flat. Folded Rear Seat To raise the seatback, pull the strap forward and lift the seatback into its upright position.
Page 163: Reclining Rear Seat - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 161 WARNING! WARNING! Be certain that the seatback is securely locked into Do not ride with the seatback reclined so that the position. If the seatback is not securely locked into shoulder belt is no longer resting against your chest. position the seat will not provide the proper stability In a collision you could slide under the seat belt and for child seats and/or passengers.
Page 164: To Open And Close The Hood
162 UNDERSTANDING THE FEATURES OF YOUR VEHICLE TO OPEN AND CLOSE THE HOOD 2. Move the safety latch, located outside the vehicle under the front edge of the hood, toward the center To open the hood, two latches must be released. and raise the hood.
Page 165 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 163 Lift the hood prop rod, clipped to the right side (left side CAUTION! facing hood) of the engine compartment to secure the hood in the open position. Place the hood prop at the To prevent possible damage: •...
Page 166: Lights
164 UNDERSTANDING THE FEATURES OF YOUR VEHICLE LIGHTS Headlights And Parking Lights Turn the end of the multifunction lever to the first detent Multifunction Lever to turn on the parking lights. Turn the end of the lever to The multifunction lever controls the operation of the the second detent to turn on the headlights.
Page 167: Automatic Headlights - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 165 Automatic Headlights — If Equipped With the engine running and the multifunction lever in the AUTO position, the headlights will turn on and turn Turning the end of the multifunction lever to the third off based on the surrounding light levels.
Page 168: Fog Lights - If Equipped
166 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Fog Lights — If Equipped NOTE: The fog lights will only operate with the head- lights on low beam. Selecting high beam headlights will turn off the fog lights. The front fog light switch is on the multifunc- tion lever.
Page 169: High/Low Beam Switch
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 167 Lane Change Assist Tap the lever up or down once, without moving beyond the detent, and the turn signal (right or left) will flash three times then automatically turn off. High/Low Beam Switch Push the multifunction lever away from you to switch the headlights to high beam.
Page 170: Headlights On With Wipers (Available With Automatic Headlights Only)
168 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Headlights On With Wipers (Available With Instrument Panel Dimming Automatic Headlights Only) Rotate the center portion of the lever to the extreme When this feature is active, the headlights will turn on bottom position to fully dim the instrument panel lights approximately 10 seconds after the wipers are turned on and prevent the interior lights from illuminating when a if the headlight switch is placed in the AUTO position.
Page 171: Map/Reading Lights
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 169 light off. The lights also come on when a door is opened or the dimmer control is turned fully upward, past the second detent. Dimmer Control Map/Reading Lights These lights are mounted between the sun visors above Map/Reading Lights the rear view mirror.
Page 172: Windshield Wipers And Washers
170 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: The lights will remain on until the switch is pushed a second time, so be sure they have been turned off before leaving the vehicle. They will not turn off automatically. WINDSHIELD WIPERS AND WASHERS The windshield wiper/washer control lever is located on the right side of the steering column.
Page 173: Windshield Wiper Operation
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 171 Windshield Wiper Operation CAUTION! Rotate the end of the lever upward to the second detent • Turn the windshield wipers off when driving past the intermittent settings for low-speed wiper opera- through an automatic car wash. Damage to the tion.
Page 174: Intermittent Wiper System
172 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Intermittent Wiper System Windshield Washers Use the intermittent wiper when weather conditions To use the washer, pull the control lever toward you and make a single wiping cycle, with a variable pause be- hold while spray is desired.
Page 175: Headlights On With Wipers (Available With Automatic Headlights Only)
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 173 Headlights On With Wipers (Available With NOTE: The mist feature does not activate the washer Automatic Headlights Only) pump; therefore, no washer fluid will be sprayed on the windshield. The wash function must be used in order to When this feature is active, the headlights will turn on spray the windshield with washer fluid.
Page 176: Tilt Steering Column
174 UNDERSTANDING THE FEATURES OF YOUR VEHICLE TILT STEERING COLUMN This feature allows you to tilt the steering column upward or downward. The tilt steering column lever is located on the left side of the steering column, below the turn signal lever. Push down on the lever to unlock the steering column.
Page 177: Electronic Speed Control - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 175 WARNING! Do not adjust the steering column while driving. Adjusting the steering column while driving or driv- ing with the steering column unlocked, could cause the driver to lose control of the vehicle. Failure to follow this warning may result in serious injury or death.
Page 178: To Activate
176 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: In order to ensure proper operation, the Elec- WARNING! tronic Speed Control System has been designed to shut down if multiple Speed Control functions are operated at Leaving the Electronic Speed Control system on the same time.
Page 179: To Deactivate
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 177 To Deactivate The drivers preferred units can be selected through the instrument panel settings if equipped. Refer to “Under- A soft tap on the brake pedal, pushing the CANCEL standing Your Instrument Panel” for more information. button, or normal brake pressure while slowing the The speed increment shown is dependant on the chosen vehicle will deactivate the Electronic Speed Control with-...
Page 180: To Accelerate For Passing
178 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • If the button is continually pushed, the set speed will • If the button is continually pushed, the set speed will continue to increase until the button is released, then continue to decrease until the button is released, then the new set speed will be established.
Page 181: Parkview Rear Back Up Camera - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 179 NOTE: The Electronic Speed Control system maintains PARKVIEW REAR BACK UP CAMERA — IF speed up and down hills. A slight speed change on EQUIPPED moderate hills is normal. Your vehicle may be equipped with the ParkView Rear Back Up Camera that allows you to see an on-screen On steep hills, a greater speed loss or gain may occur so image of the rear surroundings of your vehicle whenever...
Page 182 180 UNDERSTANDING THE FEATURES OF YOUR VEHICLE out of REVERSE unless the forward vehicle speed ex- help indicate the distance to the rear of the vehicle. ceeds 8 mph (13 km/h), the transmission is shifted into Different colored zones indicate the distance to the rear of PARK or the vehicles ignition is cycled to the OFF the vehicle.
Page 183: Garage Door Opener - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 181 GARAGE DOOR OPENER — IF EQUIPPED CAUTION! HomeLink replaces up to three remote controls (hand- • To avoid vehicle damage, ParkView should only be held transmitters) that operate devices such as garage used as a parking aid. The ParkView camera is door openers, motorized gates, lighting or home security unable to view every obstacle or object in your systems.
Page 184 182 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The HomeLink buttons, located on either the overhead console, headliner or sunvisor, designate the three differ- ent HomeLink channels. The HomeLink indicator is located above the center button. HomeLink Buttons/Sunvisor/Headliner NOTE: HomeLink is disabled when the Vehicle Security Alarm is active.
Page 185: Before You Begin Programming Homelink
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 183 Before You Begin Programming HomeLink NOTE: • Erasing all channels should only be performed when Be sure that your vehicle is parked outside of the garage before you begin programming. programming HomeLink for the first time. Do not erase channels when programming additional buttons.
Page 186 184 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 2. Place the hand-held transmitter 1 to 3 inches (3 to 8 cm) away from the HomeLink button you wish to program while keeping the HomeLink indicator light in view. 3. Push and hold the HomeLink button you want to program while you push and hold the hand-held transmitter button.
Page 187: Programming A Non-Rolling Code
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 185 Firmly push and release the “LEARN” or “TRAIN- Reprogramming A Single HomeLink Button ING” button. On some garage door openers/devices (Rolling Code) there may be a light that blinks when the garage door To reprogram a channel that has been previously trained, opener/device is in the LEARN/TRAIN mode.
Page 188 186 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • To program the two remaining HomeLink buttons, 2. Place the hand-held transmitter 1 to 3 inches (3 to 8 cm) away from the HomeLink button you wish to repeat each step for each remaining button. DO NOT program while keeping the HomeLink indicator light erase the channels.
Page 189: Canadian/Gate Operator Programming
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 187 Canadian/Gate Operator Programming 2. Place the hand-held transmitter 1 to 3 inches (3 to 8 cm) away from the HomeLink button you wish to For programming transmitters in Canada/United States program while keeping the HomeLink indicator light that require the transmitter signals to “time-out”...
Page 190: Using Homelink
188 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: 2. Push and hold the desired HomeLink button until the indicator light begins to flash after 20 seconds. Do not • If the indicator light stays on constantly, program- release the button. ming is complete and the garage door/device should activate when the HomeLink button is pushed.
Page 191: Troubleshooting Tips
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 189 To do this, push and hold the two outside buttons for 20 If you have any problems, or require assistance, please seconds until the red indicator flashes. Note that all call toll-free 1-800-355-3515 or, on the Internet at channels will be erased.
Page 192: General Information
190 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: WARNING! (Continued) • The transmitter has been tested and it complies with after 1982. Do not use a garage door opener without FCC and IC rules. Changes or modifications not ex- these safety features. Call toll-free 1-800-355-3515 pressly approved by the party responsible for compli- or, on the Internet at HomeLink.com for safety ance could void the user’s authority to operate the...
Page 193: Power Sunroof - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 191 POWER SUNROOF — IF EQUIPPED WARNING! The power sunroof switch is located on the overhead • Never leave children alone in a vehicle, or with console. access to an unlocked vehicle. Never leave the Key Fob in or near the vehicle, or in a location acces- sible to children.
Page 194: Opening Sunroof - Express
192 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Opening Sunroof — Express position. The sunroof will close fully and stop automati- cally. This is called “Express Close.” During Express Push the switch rearward and release it within one-half Close operation, any other actuation of the switch will second.
Page 195: Venting Sunroof - Express
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 193 Venting Sunroof — Express open or partially open positions. This is a normal occur- rence and can be minimized. If the buffeting occurs with Push and release the Vent button within one half second the rear windows open, open the front and rear windows and the sunroof will open to the vent position.
Page 196: Electrical Power Outlets
194 UNDERSTANDING THE FEATURES OF YOUR VEHICLE For Vehicles Equipped With The EVIC The power sunroof switch will remain active for up to approximately ten minutes after the ignition switch is turned to the LOCK position. Opening either front door will cancel this feature.
Page 197 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 195 NOTE: To ensure proper operation a MOPAR knob and element must be used. CAUTION! • Do not exceed the maximum power of 160 Watts (13 Amps) at 12 Volts. If the 160 Watt (13 Amp) power rating is exceeded the fuse protecting the system will need to be replaced.
Page 198 196 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! CAUTION! • Many accessories that can be plugged in draw To avoid serious injury or death: • Only devices designed for use in this type of outlet power from the vehicle’s battery, even when not in should be inserted into any 12 Volt outlet.
Page 199: Power Inverter - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 197 POWER INVERTER — IF EQUIPPED A 115 Volt (150 Watt) AC power inverter is located on the front of the center console for added convenience. This outlet can power mobile phones, electronics and other low power devices requiring power up to 150 Watts.
Page 200 198 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! CAUTION! • Many accessories that can be plugged in draw To avoid serious injury or death: • Do not use a three-prong adaptor. power from the vehicle’s battery, even when not in •...
Page 201: Cupholders
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 199 CUPHOLDERS There are two cupholders located in the back for the rear passengers. Your vehicle is equipped with four cupholders. There are two illuminated cupholders located in the front. Rear Cupholders Front Cupholders...
Page 202: Storage
200 UNDERSTANDING THE FEATURES OF YOUR VEHICLE STORAGE To open the lower glove compartment, pull outward on the release handle. Glove Compartment And Storage Bin Located on the passenger side of the instrument panel are an upper storage bin and a lower glove compartment. Glove Compartment Storage Bins 1 —...
Page 203: Door Storage
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 201 Door Storage The interior door panels are equipped with lower storage areas. Rear Door Storage CONSOLE FEATURES The floor console contains both an upper and lower storage compartment. Front Door Storage...
Page 204 202 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To open the upper storage compartment, push inward on the upper handle to unlatch the upper lid and lift the lid open. Lower Storage Compartment WARNING! Upper Storage Compartment Do not operate this vehicle with a console compart- To open the lower storage compartment, lift upward on ment lid in the open position.
Page 205: Cargo Area Features
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 203 CARGO AREA FEATURES Cargo Light The light is mounted in the headliner above the cargo area to illuminate the cargo area. Cargo Cover The cargo area trim panels include two notches for mounting the available tonneau cover that accommo- dates the reclining rear seat.
Page 206 204 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Using the handle, pull the cover toward you and guide WARNING! the rear cover posts into the guides located on both sides of the rear trim panel. In a collision a cargo cover loose in the vehicle could cause injury.
Page 207: Removable Load Floor
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 205 Removable Load Floor Cargo Tie-Down Loops The cargo area load floor is removable and can be There are four tie-downs (D-rings) installed in the cargo washed with mild soap and water. area for securing cargo. Removable Load Floor Cargo Area Tie-Downs...
Page 208 206 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! WARNING! (Continued) • Place as much cargo as possible in front of the rear • Cargo tie-down loops are not safe anchors for a axle. Too much weight or improperly placed weight child seat tether strap.
Page 209: Fold Down Speakers - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 207 Fold Down Speakers — If Equipped REAR WINDOW FEATURES When the liftgate is open, the speakers can swing down Rear Window Wiper/Washer off the trim panel to face rearward, for tailgating and The rear wiper/washer is controlled by a rotary switch other activities.
Page 210: Rear Window Defroster
208 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Rotate the center portion of the lever upward to Rear Window Defroster the first detent position for rear wiper operation. The rear window defroster button is located on NOTE: The rear wiper operates in an intermittent mode the climate controls mode control knob.
Page 211: Roof Luggage Rack - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 209 ROOF LUGGAGE RACK — IF EQUIPPED CAUTION! The crossbars and siderails are designed to carry the Failure to follow these cautions can cause damage to cargo on vehicles equipped with a luggage rack. The load the heating elements: must not exceed 150 lbs (68 kg), and should be uniformly •...
Page 212 210 UNDERSTANDING THE FEATURES OF YOUR VEHICLE approximately eight turns, then move the crossbar to the CAUTION! desired position, keeping the crossbars perpendicular to • To prevent damage to the roof of your vehicle, DO the luggage rack side rails. Once the crossbar is in one of the seven detent positions, retighten the thumb screws to NOT carry any loads on the luggage rack without lock the crossbar into position.
Page 213 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 211 CAUTION! (Continued) WARNING! • Travel at reduced speeds and turn corners carefully Cargo must be securely tied before driving your when carrying large or heavy loads on the roof vehicle. Improperly secured loads can fly off the rack.
Page 215 UNDERSTANDING YOUR INSTRUMENT PANEL CONTENTS INSTRUMENT PANEL FEATURES ..217 ELECTRONIC VEHICLE INFORMATION CENTER (EVIC) — IF EQUIPPED ....249 INSTRUMENT CLUSTER .
Page 216 214 UNDERSTANDING YOUR INSTRUMENT PANEL ▫ Display Units Of Measure In ... . .255 ▫ Hill Start Assist (HSA) — If Equipped ..258 ▫ Display Units In ..... .258 Personal Settings (Customer-Programmable Features) .
Page 217 UNDERSTANDING YOUR INSTRUMENT PANEL 215 ▫ Uconnect (Satellite Radio) — If Equipped ..277 ▫ Operating Instructions — Radio Mode ..292 ▫ Operation Instructions — CD MODE For CD And UCONNECT 430/430N CD/DVD/HDD/NAV — IF EQUIPPED .
Page 218 216 UNDERSTANDING YOUR INSTRUMENT PANEL ▫ List Or Browse Mode ....312 RADIO OPERATION AND MOBILE DEVICES . .318 ▫ Bluetooth Streaming Audio (BTSA) ..314 CLIMATE CONTROLS .
Page 219: Instrument Panel Features
UNDERSTANDING YOUR INSTRUMENT PANEL 217 INSTRUMENT PANEL FEATURES 1 — Air Outlet 5 — Storage Bin 9 — Heated Seat Switch – If Equipped 2 — Demisters 6 — Glove Compartment 10 — Hazard Warning Flasher 3 — Instrument Cluster 7 —...
Page 220: Instrument Cluster
218 UNDERSTANDING YOUR INSTRUMENT PANEL INSTRUMENT CLUSTER...
Page 221 UNDERSTANDING YOUR INSTRUMENT PANEL 219 1. Speedometer 2. Tachometer • The Speedometer shows the vehicle speed in miles • This gauge measures engine revolutions per minute per hour (MPH) and kilometers per hour (km/h). (RPM x 1000). Before the pointer reaches the red area, ease up on the accelerator to prevent engine damage.
Page 222 220 UNDERSTANDING YOUR INSTRUMENT PANEL 4. Electronic Vehicle Information Center (EVIC) — If CAUTION! Equipped / Odometer Display / Trip Odometer Dis- play Driving with a hot engine cooling system could damage your vehicle. If the temperature gauge reads Electronic Vehicle Information Center (EVIC) — If “H”...
Page 223 UNDERSTANDING YOUR INSTRUMENT PANEL 221 Message Display Area LoW tirE When the appropriate conditions exist, the following When the appropriate condition exists, the odometer odometer messages will display: display will toggle between LoW and tirE for three door ......Door Ajar cycles.
Page 224 222 UNDERSTANDING YOUR INSTRUMENT PANEL noFUSE position. To reset the oil change indicator system (after performing the scheduled maintenance), perform the If the vehicle diagnostic system determines that the following steps. Ignition Off Draw (IOD) fuse is improperly installed, or damaged, a “noFUSE”...
Page 225: Warning And Indicator Lights
UNDERSTANDING YOUR INSTRUMENT PANEL 223 WARNING AND INDICATOR LIGHTS IMPORTANT: The warning / indicator light switches on in the instrument panel together with a dedicated mes- sage and/or acoustic signal when applicable. These indications are indicative and precautionary and as such must not be considered as exhaustive and/or alternative to the information contained in the Owner Manual, which you are advised to read carefully in all cases.
Page 226: Red Telltale Indicator Lights
224 UNDERSTANDING YOUR INSTRUMENT PANEL Red Telltale Indicator Lights Seat Belt Reminder Warning Light Red Telltale What It Means Light Seat Belt Reminder Warning Light When the ignition switch is first turned to ON/RUN, this light will turn on for four to eight seconds as a bulb check.
Page 227 UNDERSTANDING YOUR INSTRUMENT PANEL 225 Air Bag Warning Light Red Telltale What It Means Light Air Bag Warning Light This light will turn on for four to eight seconds as a bulb check when the ignition switch is first turned to ON/RUN. If the light is either not on during starting, stays on, or turns on while driving, have the system inspected at an authorized dealer as soon as possible.
Page 228 226 UNDERSTANDING YOUR INSTRUMENT PANEL Brake Warning Light Red Telltale What It Means Light Brake Warning Light This light monitors various brake functions, including brake fluid level and parking brake application. If the brake light turns on it may indicate that the parking brake is applied, that the brake fluid level is low, or that there is a problem with the anti-lock brake system reser- voir.
Page 229 UNDERSTANDING YOUR INSTRUMENT PANEL 227 The light will remain on until the cause is corrected. Brake Warning Light will turn on along with the ABS Light. Immediate repair to the ABS system is required. NOTE: The light may flash momentarily during sharp cornering maneuvers, which change fluid level condi- Operation of the Brake Warning Light can be checked by tions.
Page 230 228 UNDERSTANDING YOUR INSTRUMENT PANEL Vehicle Security Warning Light — If Equipped Red Telltale What It Means Light Vehicle Security Warning Light This light will flash at a fast rate for approximately 15 seconds when the vehicle security alarm is arming, and then will flash slowly until the vehicle is disarmed. Oil Pressure Warning Light Red Telltale What It Means...
Page 231 UNDERSTANDING YOUR INSTRUMENT PANEL 229 Engine Temperature Warning Light Red Warning What It Means Light Engine Temperature Warning Light This light warns of an overheated engine condition. As engine coolant temperatures rise and the gauge approaches H, this indicator will illuminate and a single chime will sound after reaching a set threshold.
Page 232 230 UNDERSTANDING YOUR INSTRUMENT PANEL Oil Temperature Warning Light Red Telltale What It Means Light Oil Temperature Warning Light This telltale indicates engine oil temperature is high. If the light turns on while driving, stop the vehicle and shut off the engine as soon as possible.
Page 233 UNDERSTANDING YOUR INSTRUMENT PANEL 231 Charging System Warning Light Red Telltale What It Means Light Charging System Warning Light This light shows the status of the electrical charging system. If the light stays on or comes on while driving, turn off some of the vehicle’s nonessential electrical devices or increase engine speed (if at idle).
Page 234 232 UNDERSTANDING YOUR INSTRUMENT PANEL Electronic Throttle Control (ETC) Warning Light Red Telltale What It Means Light Electronic Throttle Control (ETC) Warning Light This light informs you of a problem with the Electronic Throttle Control (ETC) system. If a problem is detected while the engine is running, the light will either stay on or flash de- pending on the nature of the problem.
Page 235: Yellow Telltale Indicator Lights
UNDERSTANDING YOUR INSTRUMENT PANEL 233 Yellow Telltale Indicator Lights Engine Check/Malfunction Indicator Light (MIL) Yellow Telltale What It Means Light Engine Check/Malfunction Indicator Light (MIL) The Engine Check/Malfunction Indicator Light (MIL) is a part of an Onboard Diagnostic System called OBD II that monitors engine and automatic transmission control systems. The light will illuminate when the ignition is in the ON position before engine start.
Page 236 234 UNDERSTANDING YOUR INSTRUMENT PANEL CAUTION! WARNING! Prolonged driving with the Malfunction Indicator A malfunctioning catalytic converter, as referenced Light (MIL) on could cause damage to the engine above, can reach higher temperatures than in normal control system. It also could affect fuel economy and operating conditions.
Page 237 UNDERSTANDING YOUR INSTRUMENT PANEL 235 Tire Pressure Monitoring Indicator Light Yellow Telltale What It Means Light Tire Pressure Monitoring Indicator Light The warning light switches on and a message is displayed to indicate that the tire pressure is lower than the recommended value and/or that slow pressure loss is occurring. In these cases, optimal tire duration and fuel consumption may not be guaranteed.
Page 238 236 UNDERSTANDING YOUR INSTRUMENT PANEL on the vehicle placard or tire inflation pressure label, you Your vehicle has also been equipped with a TPMS should determine the proper tire inflation pressure for malfunction indicator to indicate when the system is not those tires.
Page 239 UNDERSTANDING YOUR INSTRUMENT PANEL 237 CAUTION! The TPMS has been optimized for the original equipment tires and wheels. TPMS pressures and warning have been established for the tire size equipped on your vehicle. Undesirable system opera- tion or sensor damage may result when using re- placement equipment that is not of the same size, type, and/or style.
Page 240 238 UNDERSTANDING YOUR INSTRUMENT PANEL Electronic Stability Control (ESC) OFF Indicator Light — If Equipped Yellow Telltale What It Means Light Electronic Stability Control (ESC) OFF Indicator Light This light indicates the Electronic Stability Control (ESC) is off.
Page 241 UNDERSTANDING YOUR INSTRUMENT PANEL 239 Electronic Stability Control (ESC) Indicator Light — If Equipped Yellow Telltale What It Means Light Electronic Stability Control (ESC) Indicator Light The “ESC Indicator Light” in the instrument cluster will come on when the ignition switch is turned to the ON/RUN position.
Page 242 240 UNDERSTANDING YOUR INSTRUMENT PANEL Anti-Lock Brake (ABS) Indicator Light Yellow Telltale What It Means Light Anti-Lock Brake (ABS) Indicator Light This light monitors the Anti-Lock Brake System (ABS). The light will turn on when the igni- tion switch is placed in the ON/RUN position and may stay on for as long as four seconds. If the ABS light remains on or turns on while driving, then the Anti-Lock portion of the brake system is not functioning and service is required.
Page 243 UNDERSTANDING YOUR INSTRUMENT PANEL 241 Low Fuel Warning Indicator Light Yellow Telltale What It Means Light Low Fuel Warning Indicator Light When the fuel level reaches approximately 2.8 gal (10.6 L), this light will turn on and a single chime will sound. 4WD! Warning Light —...
Page 244 242 UNDERSTANDING YOUR INSTRUMENT PANEL Loose Fuel Filler Cap Indicator Light — If Equipped Yellow Telltale What It Means Light Loose Fuel Filler Cap Indicator Light This light will illuminate when fuel filler cap is loose. Properly close the filler cap to disen- gage the light.
Page 245 UNDERSTANDING YOUR INSTRUMENT PANEL 243 Transmission Temperature Indicator Light Red Telltale What It Means Light Transmission Temperature Indicator Light This light indicates that the transmission fluid temperature is running hot. This may occur with severe usage, such as trailer towing. If this light turns on, safely pull over and stop them ve- hicle.
Page 246: Green Telltale Indicator Lights
244 UNDERSTANDING YOUR INSTRUMENT PANEL Green Telltale Indicator Lights Turn Signal Indicator Lights Green Tell- What It Means tale Light Turn Signal Indicator Lights The instrument cluster arrow will flash independently for the LEFT or RIGHT turn signal as se- lected, as well as the exterior turn signal lamp(s) (front and rear) as selected when the multi- function lever is moved down (LEFT) or up (RIGHT).
Page 247 UNDERSTANDING YOUR INSTRUMENT PANEL 245 Park/Headlight ON Indicator Light Green Telltale What It Means Light Park/Headlight ON Indicator Light This indicator will illuminate when the park lights or headlights are turned on. Front Fog Indicator Light — If Equipped Green Telltale What It Means Light Front Fog Indicator Light...
Page 248: Blue Telltale Indicator Light
246 UNDERSTANDING YOUR INSTRUMENT PANEL Blue Telltale Indicator Light High Beam Indicator Light Blue Telltale What It Means Light High Beam Indicator Light This indicator shows that the high beam headlights are on. Push the multifunction control lever away from you to switch the headlights to high beam. Pull the lever toward you to switch the headlights back to low beam.
Page 249: Mini-Trip Computer - If Equipped
UNDERSTANDING YOUR INSTRUMENT PANEL 247 Hill Descent Indicator Light — If Equipped White Tell- What It Means tale Light Hill Descent Indicator Light This indicator shows when the Hill Descent Control (HDC) feature is turned on. The lamp will be on solid when HDC is armed. HDC can only be armed when the transfer case is in the “4WD LOW”...
Page 250: Control Buttons
248 UNDERSTANDING YOUR INSTRUMENT PANEL Control Buttons RESET Button To reset the display shown, turn the ignition switch to the ON position, then push and hold the RESET button located on the steering wheel. The following displays can be reset or changed: •...
Page 251: Electronic Vehicle Information Center (Evic) - If Equipped
UNDERSTANDING YOUR INSTRUMENT PANEL 249 ELECTRONIC VEHICLE INFORMATION CENTER The EVIC consists of the following: (EVIC) — IF EQUIPPED • System Status The Electronic Vehicle Information Center (EVIC) fea- • Units tures a driver-interactive display that is located in the •...
Page 252 250 UNDERSTANDING YOUR INSTRUMENT PANEL The system allows the driver to select information by MENU Button pushing the following buttons mounted on the steering Push and release the MENU button to scroll wheel: through the main menus (Fuel Economy, Warn- ings, Timer, Units, System, Personal Settings) or to exit submenus.
Page 253 UNDERSTANDING YOUR INSTRUMENT PANEL 251 • Personal Settings Not Avail. — Vehicle is not in PARK DOWN Button (automatic transmission), or vehicle is in motion Push and release the DOWN button to scroll (manual transmission). downward through the submenus. • Door Ajar (with vehicle graphic showing which door is open.
Page 254: Engine Oil Change Indicator System - If Equipped
252 UNDERSTANDING YOUR INSTRUMENT PANEL • Remote Start Aborted — Fuel Low indicator system is duty-cycle based, which means the engine oil change interval may fluctuate dependent upon • Remote Start Aborted — System Fault your personal driving style. • Key In Ignition Unless reset, this message will continue to display each •...
Page 255: Evic Functions
UNDERSTANDING YOUR INSTRUMENT PANEL 253 NOTE: If the indicator message illuminates when you To Reset The Display start the vehicle, the oil change indicator system did not Pushing and holding the RIGHT arrow button once will reset. If necessary, repeat this procedure. clear the function currently being displayed.
Page 256: Average Fuel Economy
254 UNDERSTANDING YOUR INSTRUMENT PANEL Average Fuel Economy When the DTE value is less than 30 miles (48 km) estimated driving distance, the DTE display will change Shows the average fuel economy since the last reset to a text display of LOW FUEL. This display will (pushing and holding the RIGHT arrow button as continue until the vehicle runs out of fuel.
Page 257: Display Units Of Measure In
UNDERSTANDING YOUR INSTRUMENT PANEL 255 Elapsed time is displayed as follows: Push and release the MENU or DOWN buttons until “Personal Settings” is displayed in the EVIC then push hours: minutes: seconds and release the RIGHT button. Elapsed time can be reset by pushing and holding the Use the RIGHT button to display one of the following RIGHT arrow button (as prompted in the EVIC display).
Page 258: Auto Lock Doors
256 UNDERSTANDING YOUR INSTRUMENT PANEL Auto Lock Doors RKE Unlock When ON is selected, all doors lock automatically when When Driver’s Door 1st is selected, only the driver’s door the speed of the vehicle reaches 15 mph (24 km/h). Push will unlock on the first push of the Remote Keyless Entry and hold the RIGHT arrow button when in this display (RKE) transmitter UNLOCK button and require a second...
Page 259: Sound Horn With Lock
UNDERSTANDING YOUR INSTRUMENT PANEL 257 Sound Horn With Lock Headlamps with Wipers (Available with Auto Headlights Only) When ON is selected, a short horn sound will occur when the RKE transmitter LOCK button is pushed. This feature When on is selected, and the headlight switch is in the may be selected with or without the Flash Lights with AUTO position, the headlights will turn on approxi- Lock feature.
Page 260: Illuminated Approach
258 UNDERSTANDING YOUR INSTRUMENT PANEL either front vehicle door will cancel this feature. Push and Display Units In hold the RIGHT button when in this display until “OFF,” The EVIC, odometer, and Uconnect GPS system units can “45 sec.”, “5 min.”, or “10 min.” appears to make your be changed between U.S and Metric.
Page 261: Manual Compass Calibration
UNDERSTANDING YOUR INSTRUMENT PANEL 259 NOTE: A good calibration requires a level surface and 4. Push and release the RIGHT arrow button to start the an environment free from large metallic objects such as calibration. The “CAL” indicator will display in the buildings, bridges, underground cables, railroad tracks, EVIC.
Page 262 260 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: Magnetic materials should be kept away from 2. Push and hold the COMPASS button for approxi- the top of the right rear quarter window. This is where mately two seconds. the compass sensor is located. 3.
Page 263: Uconnect 230 - Am/Fm Stereo Radio And 6-Disc Cd/Dvd Changer
UNDERSTANDING YOUR INSTRUMENT PANEL 261 UCONNECT 230 – AM/FM STEREO RADIO AND Operating Instructions — Radio Mode 6–DISC CD/DVD CHANGER (MP3/WMA AUX NOTE: The ignition switch must be in the ON or ACC JACK) position to operate the radio. Power Switch/Volume Control (Rotary) Push the ON/VOLUME control knob to turn on the radio.
Page 264 262 UNDERSTANDING YOUR INSTRUMENT PANEL SEEK Buttons Voice Command Button Uconnect Phone — If Equipped Push and release the SEEK buttons to search for the next listenable station in AM/FM mode. Push the right switch Push this button to operate the Uconnect Phone feature to seek up and the left switch to seek down.
Page 265 UNDERSTANDING YOUR INSTRUMENT PANEL 263 TIME Button The clock can also be set by pushing the SETUP button and selecting the “SET HOME CLOCK” entry. Once in this Push the TIME button to alternate locations of the time display follow the above procedure, starting at step 2. and frequency display.
Page 266 264 UNDERSTANDING YOUR INSTRUMENT PANEL Setting The Tone, Balance And Fade Push the rotary TUNE/SCROLL control knob a fifth time and FADE will display. Turn the TUNE/SCROLL control Push the rotary TUNE/SCROLL control knob and BASS knob to the left or right to adjust the sound level between will display.
Page 267 UNDERSTANDING YOUR INSTRUMENT PANEL 265 Toggle the MUSIC TYPE button to select the following 16-Digit Character Program Type format types: Display Oldies Oldies 16-Digit Character Program Type Personality Persnlty Display Public Public No program type or un- None defined Rhythm and Blues R &...
Page 268 266 UNDERSTANDING YOUR INSTRUMENT PANEL • DVD Enter — When the disc is in DVD Menu mode, By pushing the SEEK button when the Music Type icon is displayed, the radio will be tuned to the next frequency selecting DVD Enter will allow you to play the current station with the same selected Music Type name.
Page 269 UNDERSTANDING YOUR INSTRUMENT PANEL 267 • Angle — Repeatedly pressing SELECT will change the • Set Home Clock — Pressing the SELECT button viewing angle if supported by the DVD disc (if allows you to set the clock. Turn the TUNE/SCROLL equipped).
Page 270 268 UNDERSTANDING YOUR INSTRUMENT PANEL Audio Language — If Equipped Audio DRC — If Equipped Selecting this item allows you to choose a default audio Selecting this item allows you to limit maximum audio language (effective only if the language is supported by dynamic range.
Page 271 UNDERSTANDING YOUR INSTRUMENT PANEL 269 NOTE: The user will have to set these defaults before You may add a second station to each pushbutton by loading a disc. If changes are made to these settings after repeating the above procedure with this exception: Push a disc is loaded, changes will not be effective.
Page 272: Operation Instructions - Disc Mode For Cd And Mp3/Wma Audio Play, Dvd - Video
270 UNDERSTANDING YOUR INSTRUMENT PANEL DISC Button CAUTION! Pushing the DISC button will allow you to switch from The radio may shut down during extremely hot AM/FM modes to Disc modes. conditions. When this occurs, the radio will indicate Operation Instructions — DISC Mode For CD And “Disc Hot”...
Page 273 UNDERSTANDING YOUR INSTRUMENT PANEL 271 Radio display will show LOADING DISC when the disc Push and hold the EJECT button for five seconds and all is loading and “READING DISC” when the radio is CDs will be ejected from the radio. reading the disc.
Page 274 272 UNDERSTANDING YOUR INSTRUMENT PANEL TIME Button (CD MODE) Supported Media (Disc Types) Push this button to change the display from a large CD The MP3/WMA file recording media supported by the playing time display to a small CD playing time display. radio are CDDA, CD-R, CD-RW, MP3,WMA, DVD Video, DVD-R, DVD-RW, DVD+R, DVD+RW, and CDDA+MP3.
Page 275 UNDERSTANDING YOUR INSTRUMENT PANEL 273 • Maximum number of characters in file/folder names: Supported MP3/WMA File Formats • Level 1: 12 (including a separator . and a three- The radio will recognize only files with the *.MP3/WMA character extension) extension as MP3/WMA files. Non-MP3/WMA files •...
Page 276 274 UNDERSTANDING YOUR INSTRUMENT PANEL Playlist files are not supported. MP3 Pro files are not Sampling MPEG supported. Frequency Bit Rate (kbps) Specification (kHz) Playback Of MP3/WMA Files MPEG-1 Audio 48, 44.1, 32 320, 256, 224, When a medium containing MP3/WMA data is loaded, Layer 3 192, 160, 128, the radio checks all files on the medium.
Page 277: List Button - Disc Mode For Mp3/Wma Play
UNDERSTANDING YOUR INSTRUMENT PANEL 275 To increase the speed of disc loading, it is recommended Push the INFO button once more to return to elapsed to use CD-R media and single-session discs. To create a time priority mode. single-session disc, enable the “Disc at Once” option Push and hold the INFO button for three seconds or more before writing to the disc.
Page 278 276 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: The AUX device must be turned on and the TIME Button (Auxiliary Mode) device’s volume set to the proper level. If the AUX audio Push the TIME button to change the display from elapsed is not loud enough, turn the device’s volume up.
Page 279: Uconnect (Satellite Radio) - If Equipped
UNDERSTANDING YOUR INSTRUMENT PANEL 277 Operating Instructions — Video Entertainment System (VES) (If Equipped) “DTS and “DTS 2.0” are trademarks of Digital Theater Refer to “Video Entertainment System (VES)” for further Systems, Inc. details. Uconnect (Satellite Radio) — If Equipped Dolby Satellite radio uses direct satellite-to-receiver broadcast- Manufactured under license from Dolby Laboratories.
Page 280 278 UNDERSTANDING YOUR INSTRUMENT PANEL System Activation To access the ESN/SID, refer to the following steps: Sirius Satellite Radio service is pre-activated, and you ESN/SID Access may begin listening immediately to the one year of audio With the ignition switch in the ON/RUN or ACC posi- service that is included with the factory-installed satellite tion and the radio on, push the SETUP button and scroll radio system in your vehicle.
Page 281 UNDERSTANDING YOUR INSTRUMENT PANEL 279 decreased performance. Larger luggage items such as Operating Instructions — Uconnect (Satellite) bikes should be placed as far rearward as possible, within Mode the loading design of the rack. Do not place items directly NOTE: The ignition switch must be in the ON/RUN or on or above the antenna.
Page 282 280 UNDERSTANDING YOUR INSTRUMENT PANEL INFO Button MUSIC TYPE Button Pushing the INFO button will cycle the display informa- Pushing this button once will turn on the Music Type tion between Artist, Song Title, and Composer (if avail- mode for five seconds. Pushing the MUSIC TYPE button able).
Page 283 UNDERSTANDING YOUR INSTRUMENT PANEL 281 SETUP Button You may add a second station to each pushbutton by repeating the above procedure with this exception: Push Pushing the SETUP button allows you to select the the SET/RND button twice and SET 2 will show in the following items: display window.
Page 284: Equipped
282 UNDERSTANDING YOUR INSTRUMENT PANEL UCONNECT 430/430N CD/DVD/HDD/NAV — IF UCONNECT 130 EQUIPPED Refer to your Uconnect Supplement Manual for detailed operating instructions. Operating Instructions (Voice Command System) — If Equipped Refer to “Voice Command” for further details. Operating Instructions (Uconnect Phone) — If Equipped Refer to “Uconnect Phone”...
Page 285 UNDERSTANDING YOUR INSTRUMENT PANEL 283 Power Switch/Volume Control (Rotary) another selection. Holding either button will bypass stations without stopping, until you release it. Push the ON/VOLUME control knob to turn on the radio. Push the ON/VOLUME control knob a second TIME Button time to turn off the radio.
Page 286 284 UNDERSTANDING YOUR INSTRUMENT PANEL 5. To exit, push any button/knob, or wait five seconds. Push the rotary TUNE/SCROLL control knob a second time and MID will display. Turn the TUNE/SCROLL RW/FF control knob to the right or left to increase or decrease the Pushing the RW (Rewind) or FF (Fast Forward) buttons mid-range tones.
Page 287 UNDERSTANDING YOUR INSTRUMENT PANEL 285 Push the rotary TUNE/SCROLL control knob again to display window. Each button can be set for SET 1 and exit setting tone, balance, and fade. SET 2 in both AM and FM. This allows a total of 12 AM and 12 FM stations to be stored into pushbutton memory.
Page 288: Operation Instructions - Cd Mode For Cd And Mp3 Audio Play
286 UNDERSTANDING YOUR INSTRUMENT PANEL Operation Instructions — CD MODE For CD And If you insert a disc with the ignition ON and the radio MP3 Audio Play ON, the unit will switch from radio to CD mode and begin to play when you insert the disc. The display will NOTE: show the track number, and index time in minutes and •...
Page 289 UNDERSTANDING YOUR INSTRUMENT PANEL 287 EJECT Button — Ejecting A CD the current selection. Pushing and holding the SEEK button will allow faster scrolling through the tracks in CD and MP3 modes. Push the EJECT button to eject the CD. TIME Button Push this button to change the display from a large CD If you have ejected a disc and have not removed it within...
Page 290: Notes On Playing Mp3 Files
288 UNDERSTANDING YOUR INSTRUMENT PANEL SET/RND Button (Random Play Button) Supported Medium Formats (File Systems) Push this button while the CD is playing to activate The medium formats supported by the radio are ISO 9660 Random Play. This feature plays the selections on the Level 1 and Level 2 and includes the Joliet extension.
Page 291 UNDERSTANDING YOUR INSTRUMENT PANEL 289 Maximum number of characters in file/folder names: Supported MP3 File Formats • Level 1: 12 (including a separator . and a three- The radio will recognize only files with the *.MP3 exten- sion as MP3 files. Non-MP3 files named with the *.MP3 character extension) extension may cause playback problems.
Page 292 290 UNDERSTANDING YOUR INSTRUMENT PANEL Playback Of MP3 Files Sampling MPEG Frequency Bit Rate (kbps) When a medium containing MP3 data is loaded, the Specification (kHz) radio checks all files on the medium. If the medium contains a lot of folders or files, the radio will take more MPEG-1 Audio 48, 44.1, 32 320, 256, 224,...
Page 293: Operation Instructions - Auxiliary Mode
UNDERSTANDING YOUR INSTRUMENT PANEL 291 To increase the speed of disc loading, it is recommended NOTE: The AUX device must be turned on and the to use CD-R media and single-session discs. To create a device’s volume set to proper level. If the AUX audio is single-session disc, enable the “Disc at Once”...
Page 294: Uconnect 130 With Satellite Radio
292 UNDERSTANDING YOUR INSTRUMENT PANEL UCONNECT 130 WITH SATELLITE RADIO Power Switch/Volume Control (Rotary) Push the ON/VOLUME control knob to turn on the radio. Push the ON/VOLUME control knob a second time to turn off the radio. Electronic Volume Control The electronic volume control turns continuously (360 degrees) in either direction, without stopping.
Page 295 UNDERSTANDING YOUR INSTRUMENT PANEL 293 another selection. Holding either button will bypass Phone Button Uconnect Phone — If Equipped stations without stopping, until you release it. Push this button to operate the Uconnect Phone feature (if equipped). Refer to “Uconnect Phone” in “Under- Voice Command System (Radio) —...
Page 296 294 UNDERSTANDING YOUR INSTRUMENT PANEL 3. After adjusting the hours, push the right side TUNE/ INFO Button SCROLL control knob to set the minutes. The minutes Push the INFO button for an RDS station (one with call will begin to blink. letters displayed).
Page 297 UNDERSTANDING YOUR INSTRUMENT PANEL 295 Setting The Tone, Balance And Fade Push the rotary TUNE/SCROLL control knob a fifth time and FADE will display. Turn the TUNE/SCROLL control Push the rotary TUNE/SCROLL control knob and BASS knob to the left or right to adjust the sound level between will display.
Page 298 296 UNDERSTANDING YOUR INSTRUMENT PANEL Toggle the MUSIC TYPE button to select the following 16-Digit Character Program Type format types: Display Oldies Oldies 16-Digit Character Program Type Personality Persnlty Display Public Public No program type or un- None defined Rhythm and Blues R &...
Page 299 UNDERSTANDING YOUR INSTRUMENT PANEL 297 By pushing the SEEK button when the Music Type icon is the minutes using the right side TUNE/SCROLL con- displayed, the radio will be tuned to the next frequency trol knob. Push the TUNE/SCROLL control knob to station with the same selected Music Type name.
Page 300: Operation Instructions - Cd Mode For Cd And Mp3 Audio Play
298 UNDERSTANDING YOUR INSTRUMENT PANEL You may add a second station to each pushbutton by Operation Instructions — CD MODE For CD And repeating the above procedure with this exception: Push MP3 Audio Play the SET/RND button twice and SET 2 will show in the NOTE: display window.
Page 301 UNDERSTANDING YOUR INSTRUMENT PANEL 299 If you insert a disc with the ignition ON and the radio EJECT Button — Ejecting A CD ON, the unit will switch from radio to CD mode and Push the EJECT button to eject the CD. begin to play when you insert the disc.
Page 302: Notes On Playing Mp3 Files
300 UNDERSTANDING YOUR INSTRUMENT PANEL the current selection. Pushing and holding the SEEK SET/RND Button (Random Play Button) button will allow faster scrolling through the tracks in Push this button while the CD is playing to activate CD and MP3 modes. Random Play.
Page 303 UNDERSTANDING YOUR INSTRUMENT PANEL 301 Supported Media (Disc Types) display the file name and folder name, and will assign a number instead. With a maximum number of files, The MP3 file recording media supported by the radio are exceeding 20 folders will result in this display. With CDDA, CD-R, CD-RW, MP3, and CDDA+MP3.
Page 304 302 UNDERSTANDING YOUR INSTRUMENT PANEL Supported MP3 File Formats Sampling MPEG Frequency Bit Rate (kbps) The radio will recognize only files with the *.MP3 exten- Specification (kHz) sion as MP3 files. Non-MP3 files named with the *.MP3 extension may cause playback problems. The radio is MPEG-1 Audio 48, 44.1, 32 320, 256, 224,...
Page 305: List Button - Cd Mode For Mp3 Play
UNDERSTANDING YOUR INSTRUMENT PANEL 303 Playback Of MP3 Files LIST Button — CD Mode For MP3 Play When a medium containing MP3 data is loaded, the Pushing the LIST button will bring up a list of all folders radio checks all files on the medium. If the medium on the disc.
Page 306: Uconnect (Satellite Radio) - If Equipped
304 UNDERSTANDING YOUR INSTRUMENT PANEL Push and hold the INFO button again for three seconds TIME Button (Auxiliary Mode) to return to elapsed time display. Push this button to change the display to time of day. The time of day will display for five seconds (when the Operation Instructions —...
Page 307 UNDERSTANDING YOUR INSTRUMENT PANEL 305 System Activation To access the ESN/SID, refer to the following steps: Sirius Satellite Radio service is pre-activated, and you ESN/SID Access may begin listening immediately to the one year of audio With the ignition switch in the ON/RUN or ACC posi- service that is included with the factory-installed satellite tion and the radio on, push the SETUP button and scroll radio system in your vehicle.
Page 308 306 UNDERSTANDING YOUR INSTRUMENT PANEL decreased performance. Larger luggage items such as Operating Instructions — Uconnect (Satellite) bikes should be placed as far rearward as possible, within Mode the loading design of the rack. Do not place items directly NOTE: The ignition switch must be in the ON/RUN or on or above the antenna.
Page 309 UNDERSTANDING YOUR INSTRUMENT PANEL 307 SCAN Button TUNE Control (Rotary) Pushing the SCAN button causes the tuner to search for Turn the rotary TUNE/SCROLL control knob clockwise the next channel, pausing for eight seconds before con- to increase or counterclockwise to decrease the channel. tinuing to the next.
Page 310 308 UNDERSTANDING YOUR INSTRUMENT PANEL SETUP Button You may add a second channel to each pushbutton by repeating the above procedure with this exception: Push Pushing the SETUP button allows you to select the the SET button twice and SET 2 will show in the display following items: window.
Page 311: Ipod/Usb/Mp3 Control - If Equipped
UNDERSTANDING YOUR INSTRUMENT PANEL 309 iPod/USB/MP3 CONTROL — IF EQUIPPED Connecting The iPod Or External USB Device This feature allows an iPod or external USB device to be Use the connection cable to connect an iPod or external plugged into the USB port, located in the center console USB device to the vehicle’s USB/AUX connector port or glove compartment.
Page 312: Using This Feature
310 UNDERSTANDING YOUR INSTRUMENT PANEL • The audio device can be controlled using the radio Once the audio device is connected and synchronized to the vehicle’s iPod/USB/MP3 control system (iPod or buttons to Play, Browse, and List the iPod contents. external USB device may take a few minutes to connect), •...
Page 313: Play Mode
UNDERSTANDING YOUR INSTRUMENT PANEL 311 • Jump forward in the current track by pushing and Play Mode holding the FF >> button. When switched to iPod/USB/MP3 control mode, the iPod or external USB device automatically starts Play • A single push backward << RW or forward FF >> will mode.
Page 314: List Or Browse Mode
312 UNDERSTANDING YOUR INSTRUMENT PANEL • Pushing the REPEAT button will change the audio List Or Browse Mode device mode to repeat the current playing track or During Play mode, pushing any of the buttons described push the VR button and say Repeat ON or Repeat below, will bring up List mode.
Page 315 UNDERSTANDING YOUR INSTRUMENT PANEL 313 During all List modes, the iPod displays all lists in To exit List mode without selecting a track, push the “wrap-around” mode. So if the track is at the bottom of same PRESET button again to go back to Play mode. the list, just turn the wheel backward (counterclockwise) LIST button: The LIST button will display the top level to get to the track faster.
Page 316: Bluetooth Streaming Audio (Btsa)
314 UNDERSTANDING YOUR INSTRUMENT PANEL Bluetooth Streaming Audio (BTSA) CAUTION! Music can be streamed from your cellular phone to the • Leaving the iPod or external USB device (or any Uconnect phone system. supported device) anywhere in the vehicle in ex- Refer to the Uconnect Radio Supplement for further treme heat or cold can alter the operation or dam- information on Bluetooth connectivity.
Page 317: Steering Wheel Audio Controls
UNDERSTANDING YOUR INSTRUMENT PANEL 315 Selecting A Different Audio Device Browse Browsing is not available on a Bluetooth Streaming 1. Push the Phone button to begin. Audio (BTSA) device. Only the current song that is 2. After the Ready prompt and following the beep, say playing will display info.
Page 318: Radio Operation
316 UNDERSTANDING YOUR INSTRUMENT PANEL Pushing the center button will make the radio switch between the various modes available (AM/FM/SAT/ CD/HDD/AUX/VES, etc.). The left-hand control is a rocker-type switch with a pushbutton in the center. The function of the left-hand control is different depending on which mode you are in.
Page 319: Cd Player
UNDERSTANDING YOUR INSTRUMENT PANEL 317 CD Player CD/DVD DISC MAINTENANCE Pushing the top of the switch once will go to the next To keep a CD/DVD in good condition, take the following track on the CD. Pushing the bottom of the switch once precautions: will go to the beginning of the current track, or to the 1.
Page 320: Radio Operation And Mobile Devices
318 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: If you experience difficulty in playing a particular CLIMATE CONTROLS disc, it may be damaged (e.g., scratched, reflective coat- The air conditioning and heating system is designed to ing removed, a hair, moisture or dew on the disc) make you comfortable in all types of weather.
Page 321 UNDERSTANDING YOUR INSTRUMENT PANEL 319 The Manual Temperature Controls consist of a series of Temperature Control outer rotary dials and inner push knobs. Blower Control Rotate this control to regulate the tem- perature of the air inside the passenger Rotate this control to regulate the compartment.
Page 322 320 UNDERSTANDING YOUR INSTRUMENT PANEL • ECONOMY MODE Air Conditioning Control If economy mode is desired, push the A/C button to turn Push this button to engage the Air OFF the indicator light and the A/C compressor. Then, Conditioning. A light will illuminate select Panel, Bi-Level or Floor mode and move the when the Air Conditioning system is temperature control to the desired temperature.
Page 323 UNDERSTANDING YOUR INSTRUMENT PANEL 321 • Panel • Floor Air is directed through the outlets in the instru- Air is directed through the floor outlets with a ment panel. These outlets can be adjusted to direct small amount flowing through the defrost and airflow.
Page 324 322 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: NOTE: • The air conditioning compressor operates in Mix, • Continuous use of the Recirculation mode may make Defrost, or a blend of these modes, even if the Air the inside air stuffy and window fogging may occur. Conditioning (A/C) button is not pushed.
Page 325: Automatic Temperature Control (Atc) - If Equipped
UNDERSTANDING YOUR INSTRUMENT PANEL 323 Automatic Temperature Control (ATC) — If Automatic Operation Equipped Operation of the system is quite simple. The Automatic Temperature Control system automati- 1. Turn the Mode Control knob (right knob) and the cally maintains the climate in the cabin of the vehicle at Blower Control knob (left knob) to AUTO.
Page 326 324 UNDERSTANDING YOUR INSTRUMENT PANEL • If your air conditioning performance seems lower than You will experience the greatest efficiency by simply allowing the system to function automatically. Selecting expected, check the front of the A/C condenser located the “O” (OFF) position on the blower control stops the in front of the radiator for an accumulation of dirt or system completely and closes the outside air intake.
Page 327 UNDERSTANDING YOUR INSTRUMENT PANEL 325 Manual Operation Override This system offers a full complement of manual override features, which consist of Blower Preferred Automatic, Mode Preferred Automatic, or Blower and Mode Pre- ferred Automatic. This means the operator can override the blower, the mode, or both.
Page 328 326 UNDERSTANDING YOUR INSTRUMENT PANEL...
Page 329 UNDERSTANDING YOUR INSTRUMENT PANEL 327 The operator can override the AUTO mode setting to This feature gives improved comfort during sunny but change airflow distribution by rotating the Mode Control cool conditions. knob (on the right) to one of the following positions. •...
Page 330 328 UNDERSTANDING YOUR INSTRUMENT PANEL • Air Conditioner Control NOTE: • When the ignition switch is turned to the LOCK Push this button to turn on the air conditioning during manual operation position, the recirculation feature will be cancelled. only. When the air conditioning is •...
Page 331: Operating Tips
UNDERSTANDING YOUR INSTRUMENT PANEL 329 • Most of the time, when in Automatic Operation, you Summer Operation can temporarily put the system into Recirculation The engine cooling system must be protected with a Mode by pushing the Recirculation button. However, high-quality antifreeze coolant to provide proper corro- under certain conditions, while in Automatic Mode, sion protection and to protect against engine overheating.
Page 332 330 UNDERSTANDING YOUR INSTRUMENT PANEL Window Fogging Outside Air Intake Interior fogging on the windshield can be quickly re- Make sure the air intake, located directly in front of the moved by turning the mode selector to Defrost. The windshield, is free of obstructions such as leaves. Leaves Defrost/Floor mode can be used to maintain a clear collected in the air intake may reduce airflow, and if they windshield and provide sufficient heating.
Page 333 UNDERSTANDING YOUR INSTRUMENT PANEL 331 Control Setting Suggestions For Various Weather Conditions...
Page 335 STARTING AND OPERATING CONTENTS ▫ Five-Speed Manual Transmission...340 STARTING PROCEDURES ....337 ▫ Manual Transmission — If Equipped ..337 ▫...
Page 336 334 STARTING AND OPERATING AUTOSTICK ......357 POWER STEERING .....371 ▫...
Page 337 STARTING AND OPERATING 335 ▫ Electronic Roll Mitigation (ERM) ..388 ▫ Run Flat Tires — If Equipped ... . .408 ▫ Hill Descent Control (HDC) — If Equipped . . .389 ▫...
Page 338 336 STARTING AND OPERATING FUEL REQUIREMENTS ....426 VEHICLE LOADING ....433 ▫...
Page 339: Starting Procedures
STARTING AND OPERATING 337 STARTING PROCEDURES WARNING! (Continued) Before starting your vehicle, adjust your seat, adjust both • Do not leave the Key Fob in or near the vehicle, or inside and outside mirrors, and fasten your seat belts. in a location accessible to children. A child could operate power windows, other controls, or move WARNING! the vehicle.
Page 340: Automatic Transmission - If Equipped
338 STARTING AND OPERATING Automatic Transmission — If Equipped Normal Starting The shift lever must be in the PARK or NEUTRAL Normal starting of either a cold or a warm engine does position before you can start the engine. Press the brake not require pumping or pressing the accelerator pedal.
Page 341: Extreme Cold Weather
STARTING AND OPERATING 339 in the ON position, release the accelerator pedal and WARNING! (Continued) repeat the “Normal Starting” procedure. another vehicle. This type of start can be dangerous if done improperly, so follow the procedure carefully. WARNING! Refer to “Jump-Starting” in “What To Do In Emer- Never pour fuel or other flammable liquid into the gencies”...
Page 342: Engine Block Heater - If Equipped
340 STARTING AND OPERATING ENGINE BLOCK HEATER — IF EQUIPPED MANUAL TRANSMISSION — IF EQUIPPED The engine block heater warms the engine, and permits Five-Speed Manual Transmission quicker starts in cold weather. Connect the cord to a standard 110-115 Volt AC electrical outlet with a WARNING! grounded, three-wire extension cord.
Page 343 STARTING AND OPERATING 341 CAUTION! • Launching in any gear except 1st gear will result in excessive slipping of the clutch and potentially lugging or stalling the engine. • Use each gear in numerical order, do not skip a gear. Be sure the transmission is in first gear, (not third), when starting from a standing position.
Page 344: Recommended Shift Speeds
342 STARTING AND OPERATING Never shift into REVERSE until the vehicle has come to a Recommended Shift Speeds complete stop. To use your manual transmission for optimal fuel economy, it should be upshifted as listed in the following NOTE: During cold weather, until the transmission lu- table.
Page 345: Downshifting
STARTING AND OPERATING 343 Downshifting When turning a corner or driving up a steep grade, downshift early so that the engine will not be overbur- Proper downshifting will improve fuel economy and dened. prolong engine life. AUTOMATIC TRANSMISSION — IF EQUIPPED CAUTION! CAUTION! If you skip a gear while downshifting or downshift...
Page 346 344 STARTING AND OPERATING NOTE: You must press and hold the brake pedal while WARNING! (Continued) shifting out of PARK. turn the engine OFF, and remove the ignition key. Once the key is removed, the transmission is WARNING! locked in PARK, securing the vehicle against un- •...
Page 347: Key Ignition Park Interlock
STARTING AND OPERATING 345 Key Ignition Park Interlock out of PARK, the ignition switch must be turned to the ON/RUN position (engine running or not) and the brake This vehicle is equipped with a Key Ignition Park Inter- pedal must be pressed. lock which requires the transmission to be in PARK before the ignition switch can be turned to the LOCK/ Six-Speed Automatic Transmission —...
Page 348 346 STARTING AND OPERATING Only shift from DRIVE to PARK or REVERSE when the PARK (P) accelerator pedal is released and the vehicle is stopped. This range supplements the parking brake by locking the Be sure to keep your foot on the brake pedal when transmission.
Page 349 STARTING AND OPERATING 347 WARNING! WARNING! (Continued) • Unintended movement of a vehicle could injure those • Never use the PARK position as a substitute for the in or near the vehicle. As with all vehicles, you should parking brake. Always apply the parking brake never exit a vehicle while the engine is running.
Page 350 348 STARTING AND OPERATING The following indicators should be used to ensure that WARNING! (Continued) you have engaged the transmission into the PARK posi- • Do not leave the ignition key in or near the vehicle tion: (or in a location accessible to children). A child •...
Page 351 STARTING AND OPERATING 349 NEUTRAL (N) CAUTION! Use this range when the vehicle is standing for prolonged Towing the vehicle, coasting, or driving for any other periods with the engine running. The engine may be reason with the transmission in NEUTRAL can cause started in this range.
Page 352 350 STARTING AND OPERATING When frequent transmission shifting occurs (such as During very cold temperatures (-4°F [-20°C] or below), when operating the vehicle under heavy loading condi- transmission operation may be modified depending on tions, in hilly terrain, traveling into strong head winds, or engine and transmission temperature as well as vehicle while towing heavy trailers), use the AutoStick shift speed.
Page 353 STARTING AND OPERATING 351 In the event of a momentary problem, the transmission If the transmission cannot be reset, authorized dealer can be reset to regain all forward gears by performing the service is required. following steps: Overdrive Operation 1. Stop the vehicle. The automatic transmission includes an electronically controlled Overdrive (sixth gear).
Page 354: Continuously Variable Automatic Transmission (Cvt) - If Equipped
352 STARTING AND OPERATING Torque Converter Clutch Continuously Variable Automatic Transmission (CVT) — If Equipped A feature designed to improve fuel economy has been included in the automatic transmission on your vehicle. The transmission gear position display (located in the A clutch within the torque converter engages automati- instrument cluster) indicates the transmission gear range.
Page 355 STARTING AND OPERATING 353 The transmission shift lever has PARK, REVERSE, NEU- PARK (P) TRAL, and DRIVE shift positions. Some models include a This range supplements the parking brake by locking the LOW position (the LOW position manually downshifts transmission. The engine can be started in this range. the transmission to a lower available ratio based on Never attempt to use PARK while the vehicle is in vehicle speed);...
Page 356 354 STARTING AND OPERATING WARNING! WARNING! (Continued) • Unintended movement of a vehicle could injure those • Never use the PARK position as a substitute for the in or near the vehicle. As with all vehicles, you should parking brake. Always apply the parking brake never exit a vehicle while the engine is running.
Page 357 STARTING AND OPERATING 355 The following indicators should be used to ensure that WARNING! (Continued) you have engaged the transmission into the PARK posi- • Do not leave the ignition key in or near the vehicle tion: (or in a location accessible to children). A child •...
Page 358 356 STARTING AND OPERATING NEUTRAL (N) CAUTION! Use this range when the vehicle is standing for prolonged Towing the vehicle, coasting, or driving for any other periods with the engine running. The engine may be reason with the transmission in NEUTRAL can cause started in this range.
Page 359: Autostick
STARTING AND OPERATING 357 further information) to select a lower gear ratio. Under LOW (L) — If Equipped these conditions, using a lower gear ratio will improve Use this range for engine braking when descending very performance and extend transmission life by reducing steep grades.
Page 360 358 STARTING AND OPERATING • The transmission will automatically downshift as the Operation vehicle slows (to prevent engine lugging) and will When the shift lever is in the DRIVE position, the display the current gear. transmission will operate automatically, shifting between •...
Page 361: Autostick (Cvt) - If Equipped
STARTING AND OPERATING 359 • The system may revert to automatic shift mode if a maximize engine braking, eliminate undesirable upshifts fault or overheat condition is detected. and downshifts, and improve overall vehicle perfor- mance. This system can also provide you with more To disengage AutoStick mode, hold the shift lever to the control during passing, city driving, cold slippery condi- right (+) until “D”...
Page 362 360 STARTING AND OPERATING • Transmission shifting will be more noticeable when In AutoStick mode, the transmission will shift up or down when (+/-) is manually selected by the driver, AutoStick is engaged. unless an engine lugging or overspeed condition would •...
Page 363: Four-Wheel Drive Operation - If Equipped
STARTING AND OPERATING 361 FOUR-WHEEL DRIVE OPERATION — IF traction surfaces, activate the “4WD LOCK” switch by EQUIPPED pulling up once and releasing. This locks the center coupling allowing more torque to be sent to the rear This feature provides full time, on-demand, four–wheel wheels.
Page 364: Off-Road Driving Tips
362 STARTING AND OPERATING An advantage of the higher ground clearance is a better and maintain a good driving posture. Avoid sudden view of the road, allowing you to anticipate problems. accelerations, turns or braking. In most cases there are no They are not designed for cornering at the same speeds as road signs, posted speed limits or signal lights.
Page 365: When To Use Low (L Off-Road) With The 4Wd Lock Lever Engaged - If Equipped
STARTING AND OPERATING 363 NOTE: For maximum off-road performance, premium WARNING! fuel is recommended. While the vehicle will operate on regular fuel when in L Off-Road mode (if equipped), the Always wear your seat belt and firmly tie down engine has been calibrated for maximum performance cargo.
Page 366 364 STARTING AND OPERATING headway. Over-revving the engine can spin the wheels turn quickly back and forth for additional traction. Mud and traction will be lost. If you start to slow to a stop, try holes pose an increased threat of vehicle damage and turning your steering wheel no more than a 1/4 turn getting stuck.
Page 367: Hill Climbing
STARTING AND OPERATING 365 LOCK engaged and ESC turned off. Reduced tire pres- to climb and should not be attempted. You should always sure will drastically improve your traction and handling, feel confident with the vehicle and your abilities. You while driving on the soft sand, but you must return the should always climb hills straight up and down.
Page 368 366 STARTING AND OPERATING Driving Up Hill WARNING! Once you have determined your ability to proceed and Never attempt to climb a hill at an angle or turn have shifted into the appropriate gear, line your vehicle around on a steep grade. Driving across an incline up for the straightest possible run.
Page 369 STARTING AND OPERATING 367 LOCK engaged and proceed with caution. Allow engine WARNING! and hill descent braking to control the descent and apply your brakes if necessary, but do not allow the tires to lock. Driving across an incline increases the risk of a rollover, which may result in severe injury.
Page 370: Driving Through Water
368 STARTING AND OPERATING your vehicles abilities and be able to recover it if some- WARNING! thing goes wrong. You should never stop or shut a vehicle off when crossing deep water unless you ingested If the engine stalls or you lose headway or cannot water into the engine air intake.
Page 371 STARTING AND OPERATING 369 soft bottoms, the vehicle will sink in, effectively increas- CAUTION! ing the water level on the vehicle. Be sure to consider this when determining the depth and the ability to safely Water ingestion into the transaxle, transfer case, cross.
Page 372: After Driving Off-Road
370 STARTING AND OPERATING • Check threaded fasteners for looseness, particularly on CAUTION! the chassis, drivetrain components, steering, and sus- pension. Retighten them, if required, and torque to the Muddy waters can reduce the cooling system effec- values specified in the Service Manual. tiveness by depositing debris onto the radiator.
Page 373: Power Steering
STARTING AND OPERATING 371 light efforts while parking and good feel while driving. If WARNING! the electric steering system experiences a fault that prevents it from providing assist, you will still have the Abrasive material in any part of the brakes may cause ability to steer the vehicle manually.
Page 374: Power Steering Fluid Check
372 STARTING AND OPERATING If the Electric Power Steering warning icon is Power Steering Fluid Check displayed and the “SERVICE POWER STEER- Checking the power steering fluid level at a defined ING” or the “POWER STEERING ASSIST OFF service interval is not required. The fluid should only be –...
Page 375: Parking Brake
STARTING AND OPERATING 373 The parking brake lever is located in the center console. WARNING! To apply the parking brake, pull the lever up as firmly as possible. To release the parking brake, pull the lever up Fluid level should be checked on a level surface and slightly, push the center button, then lower the lever with the engine off to prevent injury from moving completely.
Page 376 374 STARTING AND OPERATING When the parking brake is applied with the ignition difficult to move the shift lever out of PARK. The parking switch in the ON position, the “Brake Warning Light” in brake should always be applied whenever the driver is the instrument cluster will illuminate.
Page 377: Brake System
STARTING AND OPERATING 375 BRAKE SYSTEM WARNING! (Continued) Your vehicle is equipped with power assisted brakes as • Be sure the parking brake is fully disengaged standard equipment. In the event power assist is lost for before driving; failure to do so can lead to brake any reason (for example, repeated brake applications failure and a collision.
Page 378: Electronic Brake Control System
376 STARTING AND OPERATING If either of the two hydraulic systems lose normal capa- ELECTRONIC BRAKE CONTROL SYSTEM bility, the remaining system will still function with some Your vehicle is equipped with an advanced Electronic loss of overall braking effectiveness. This will be evident Brake Control system (EBC).
Page 379: Brake System Warning Light
STARTING AND OPERATING 377 Brake System Warning Light and driven. During this self-check you may hear a slight clicking sound as well as some related motor noises. The red “Brake System Warning Light” will turn on when the ignition switch is turned to the ON position and may ABS is activated during braking when the system detects stay on for as long as four seconds.
Page 380 378 STARTING AND OPERATING WARNING! WARNING! (Continued) • The ABS cannot prevent the natural laws of phys- • The ABS contains sophisticated electronic equip- ics from acting on the vehicle, nor can it increase ment that may be susceptible to interference braking or steering efficiency beyond that afforded caused by improperly installed or high output by the condition of the vehicle brakes and tires or...
Page 381: Anti-Lock Brake Warning Light
STARTING AND OPERATING 379 Anti-Lock Brake Warning Light Brake Assist System (BAS) The amber “Anti-Lock Brake Warning Light” will turn on The BAS is designed to optimize the vehicle’s braking when the ignition switch is turned to the ON position capability during emergency braking maneuvers.
Page 382: Hill Start Assist (Hsa)
380 STARTING AND OPERATING does not apply the throttle before this time expires, the WARNING! system will release brake pressure and the vehicle will roll down the hill as normal. The Brake Assist System (BAS) cannot prevent the natural laws of physics from acting on the vehicle, The following conditions must be met in order for HSA to nor can it increase the traction afforded by prevailing activate:...
Page 383 STARTING AND OPERATING 381 is in PARK or NEUTRAL. For vehicles equipped with Towing With HSA a manual transmission if the clutch is pressed HSA will HSA will also provide assistance to mitigate roll back remain active. while towing a trailer. WARNING! WARNING! There may be situations where the Hill Start Assist...
Page 384 382 STARTING AND OPERATING For vehicles not equipped with the EVIC, perform the WARNING! (Continued) following steps: • Failure to follow these warnings can result in a 1. Center the steering wheel (front wheels pointing collision or serious personal injury. straight forward).
Page 385: Traction Control System (Tcs)
STARTING AND OPERATING 383 8. Turn the ignition switch to the OFF position and then Electronic Stability Control (ESC) back to the ON position. If the sequence was com- This system enhances directional control and stability of pleted properly, the “ESC Off Indicator Light” will the vehicle under various driving conditions.
Page 386 384 STARTING AND OPERATING WARNING! WARNING! (Continued) • Vehicle modifications, or failure to properly main- • The Electronic Stability Control (ESC) cannot pre- tain your vehicle, may change the handling charac- vent the natural laws of physics from acting on the teristics of your vehicle, and may negatively affect vehicle, nor can it increase the traction afforded by the performance of the ESC system.
Page 387 STARTING AND OPERATING 385 Full On (Four-Wheel Drive Models) Or On (Two-Wheel To turn ESC on again, momentarily push the “ESC Off” Drive Models) switch. This will restore the normal “ESC On” mode of operation. This is the normal operating mode for ESC. Whenever the vehicle is started the ESC system will be in this “On”...
Page 388 386 STARTING AND OPERATING Light will illuminate and the “ESC OFF” message will WARNING! appear in the odometer. Push and release the Trip Odom- eter button located on the instrument cluster to clear this When in “Partial Off” mode, the TCS functionality of message.
Page 389 STARTING AND OPERATING 387 NOTE: The “ESC OFF” message will display and an ESC Activation/Malfunction Indicator Light And audible chime will sound when the shift lever is placed ESC OFF Indicator Light into the PARK position from any other position, and then moved out of the PARK position.
Page 390: Electronic Roll Mitigation (Erm)
388 STARTING AND OPERATING The “ESC Activation/Malfunction Indicator Light” also when ESC becomes inactive following the maneuver flashes when TCS is active. If the “ESC Activation/ that caused the ESC activation. Malfunction Indicator Light” begins to flash during ac- celeration, ease up on the accelerator and apply as little The “ESC OFF Indicator Light”...
Page 391: Hill Descent Control (Hdc) - If Equipped
STARTING AND OPERATING 389 cannot prevent wheel lift due to other factors, such as Hill Descent Control (HDC) — If Equipped road conditions, leaving the roadway, or striking objects This system maintains vehicle speed while descending or other vehicles. hills during off-road driving situations. HDC will auto- matically apply the brakes to control downhill speed to NOTE: ERM is disabled anytime the ESC is in “Full Off”...
Page 392 390 STARTING AND OPERATING Off” button for five seconds. Refer to “Electronic Stability WARNING! Control (ESC)” in this section of the manual. HDC is only intended to assist the driver in control- HDC operation can be overridden with brake application ling vehicle speed when descending hills.
Page 393: Tire Safety Information
STARTING AND OPERATING 391 TIRE SAFETY INFORMATION NOTE: • P (Passenger) — Metric tire sizing is based on U.S. Tire Markings design standards. P-Metric tires have the letter “P” molded into the sidewall preceding the size designa- tion. Example: P215/65R15 95H. •...
Page 394 392 STARTING AND OPERATING • Temporary spare tires are designed for temporary • High flotation tire sizing is based on U.S. design emergency use only. Temporary high pressure com- standards and it begins with the tire diameter molded pact spare tires have the letter “T” or “S” molded into into the sidewall.
Page 395 STARTING AND OPERATING 393 EXAMPLE: R = Construction code – R means radial construction, or – D means diagonal or bias construction 15, 16, 18 = Rim diameter in inches (in) Service Description: 95 = Load Index – A numerical code associated with the maximum load a tire can carry H = Speed Symbol –...
Page 396: Tire Identification Number (Tin)
394 STARTING AND OPERATING EXAMPLE: Load Identification: Absence of the following load identification symbols on the sidewall of the tire indicates a Standard Load (SL) tire: • XL = Extra load (or reinforced) tire, or • LL = Light load tire or •...
Page 397 STARTING AND OPERATING 395 EXAMPLE: DOT MA L9 ABCD 0301 DOT = Department of Transportation – This symbol certifies that the tire is in compliance with the U.S. Department of Transportation tire safety standards and is approved for highway use MA = Code representing the tire manufacturing location (two digits) L9 = Code representing the tire size (two digits) ABCD = Code used by the tire manufacturer (one to four digits)
Page 398: Tire Terminology And Definitions
396 STARTING AND OPERATING Tire Terminology And Definitions Term Definition B-Pillar The vehicle B-Pillar is the structural member of the body located behind the front door. Cold tire inflation pressure is defined as the tire pressure after Cold Tire Inflation Pressure the vehicle has not been driven for at least three hours, or driven less than 1 mile (1.6 km) after sitting for a minimum of three hours.
Page 399: Tire Loading And Tire Pressure
STARTING AND OPERATING 397 Tire Loading And Tire Pressure Tire And Loading Information Placard Location NOTE: The proper cold tire inflation pressure is listed on the driver’s side B-Pillar or the rear edge of the driver’s side door. Example Tire Placard Location (Door)
Page 400 398 STARTING AND OPERATING Tire And Loading Information Placard Example Tire Placard Location (B-Pillar) Tire And Loading Information Placard This placard tells you important information about the: 1. Number of people that can be carried in the vehicle. 2. Total weight your vehicle can carry.
Page 401 STARTING AND OPERATING 399 3. Tire size designed for your vehicle. To determine the maximum loading conditions of your vehicle, locate the statement “The combined weight of 4. Cold tire inflation pressures for the front, rear, and occupants and cargo should never exceed XXX lbs or spare tires.
Page 402 400 STARTING AND OPERATING 4. The resulting figure equals the available amount of NOTE: cargo and luggage load capacity. For example, if • If your vehicle will be towing a trailer, load from your “XXX” amount equals 1,400 lbs (635 kg) and there will trailer will be transferred to your vehicle.
Page 403 STARTING AND OPERATING 401...
Page 404: Tires - General Information
402 STARTING AND OPERATING Safety WARNING! WARNING! Overloading of your tires is dangerous. Overloading can cause tire failure, affect vehicle handling, and • Improperly inflated tires are dangerous and can increase your stopping distance. Use tires of the cause collisions. recommended load capacity for your vehicle.
Page 405: Tire Inflation Pressures
STARTING AND OPERATING 403 Fuel Economy WARNING! (Continued) Underinflated tires will increase tire rolling resistance • Unequal tire pressures from one side of the vehicle resulting in higher fuel consumption. to the other can cause the vehicle to drift to the right or left.
Page 406 404 STARTING AND OPERATING At least once a month: 1 mile (1.6 km) after sitting for a minimum of three hours. The cold tire inflation pressure must not exceed the • Check and adjust tire pressure with a good quality maximum inflation pressure molded into the tire side- pocket-type pressure gauge.
Page 407: Tire Pressures For High Speed Operation
STARTING AND OPERATING 405 Tire pressure may increase from 2 to 6 psi (13 to 40 kPa) WARNING! during operation. DO NOT reduce this normal pressure build up or your tire pressure will be too low. High speed driving with your vehicle under maxi- mum load is dangerous.
Page 408: Tire Types
406 STARTING AND OPERATING Tire Repair Tire Types If your tire becomes damaged, it may be repaired if it All Season Tires — If Equipped meets the following criteria: All Season tires provide traction for all seasons (Spring, • The tire has not been driven on when flat. Summer, Fall and Winter).
Page 409 STARTING AND OPERATING 407 Summer tires do not contain the all season designation or Snow Tires mountain/snowflake symbol on the tire sidewall. Use Some areas of the country require the use of snow tires Summer tires only in sets of four; failure to do so may during the Winter.
Page 410: Run Flat Tires - If Equipped
408 STARTING AND OPERATING While studded tires improve performance on ice, skid See the tire pressure monitoring section for more infor- and traction capability on wet or dry surfaces may be mation. poorer than that of non-studded tires. Some states pro- Spare Tires —...
Page 411 STARTING AND OPERATING 409 equipment tire and wheel found on the front or rear axle Since this tire has limited tread life, the original equip- of your vehicle. This spare tire may be used in the tire ment tire should be repaired (or replaced) and reinstalled rotation for your vehicle.
Page 412 410 STARTING AND OPERATING Full Size Spare — If Equipped your original equipment tire, replace (or repair) the original equipment tire and reinstall on the vehicle at the The full size spare is for temporary emergency use only. first opportunity. This tire may look like the originally equipped tire on the front or rear axle of your vehicle, but it is not.
Page 413: Tire Spinning
STARTING AND OPERATING 411 Tire Spinning Tread Wear Indicators When stuck in mud, sand, snow, or ice conditions, do not Tread wear indicators are in the original equipment tires to spin your vehicle’s wheels above 30 mph (48 km/h) or help you in determining when your tires should be replaced.
Page 414: Life Of Tire
412 STARTING AND OPERATING • Performance tires, tires with a speed rating of V or These indicators are molded into the bottom of the tread grooves. They will appear as bands when the tread depth higher, and Summer tires typically have a reduced becomes a 1/16 of an inch (1.6 mm).
Page 415: Replacement Tires
STARTING AND OPERATING 413 Replacement Tires affect your vehicle’s handling. If you ever replace a wheel, make sure that the wheel’s specifications match The tires on your new vehicle provide a balance of many those of the original wheels. characteristics. They should be inspected regularly for wear and correct cold tire inflation pressures.
Page 416: Tire Chains (Traction Devices)
414 STARTING AND OPERATING WARNING! (Continued) CAUTION! braking of your vehicle. This can cause unpredict- Replacing original tires with tires of a different size able handling and stress to steering and suspen- may result in false speedometer and odometer read- sion components.
Page 417: Tire Rotation Recommendations
STARTING AND OPERATING 415 TIRE ROTATION RECOMMENDATIONS The suggested rotation method is the “rearward cross” shown in the following diagram. This rotation pattern The tires on the front and rear of your vehicle operate at does not apply to some directional tires that must not be different loads and perform different steering, driving, reversed.
Page 418: Tire Pressure Monitoring System (Tpms)
416 STARTING AND OPERATING TIRE PRESSURE MONITORING SYSTEM (TPMS) The TPMS will warn the driver of a low tire pressure if the tire pressure falls below the low-pressure warning The Tire Pressure Monitor System (TPMS) will warn the limit for any reason, including low temperature effects, or driver of a low tire pressure based on the vehicle recom- natural pressure loss through the tire.
Page 419 STARTING AND OPERATING 417 NOTE: When filling warm tires, the tire pressure may Monitoring Telltale Light will turn OFF only after the need to be increased up to an additional 4 psi (30 kPa) tires are inflated to the vehicle’s recommended cold above the recommended cold placard pressure in order placard pressure value.
Page 420 418 STARTING AND OPERATING • Driving on a significantly under-inflated tire causes CAUTION! (Continued) the tire to overheat and can lead to tire failure. • Using aftermarket tire sealants may cause the Tire Under-inflation also reduces fuel efficiency and tire Pressure Monitoring System (TPMS) sensor to be- tread life, and may affect the vehicle’s handling and come inoperable.
Page 421: Base System
STARTING AND OPERATING 419 Base System Tire Pressure Monitoring Low Pressure Warnings The Tire Pressure Monitoring Telltale Light will illuminate This is the TPMS warning indicator located in the in the instrument cluster, a LOW TIRE message will be instrument cluster. displayed for a minimum of five seconds, and an audible chime will be activated when one or more of the four active The TPMS uses wireless technology with wheel rim...
Page 422 420 STARTING AND OPERATING Check TPMS Warnings 5. Using wheels/tires not equipped with TPM sensors. The Tire Pressure Monitoring Telltale Light will flash on NOTE: Your vehicle is equipped with a compact spare and off for 75 seconds and remain on solid when a system wheel and tire assembly.
Page 423: Premium System - If Equipped
STARTING AND OPERATING 421 4. For each subsequent ignition key cycle, a chime will Premium System — If Equipped sound and the Tire Pressure Monitoring Telltale Light The TPMS uses wireless technology with wheel rim will flash on and off for 75 seconds and then remain on mounted electronic sensors to monitor tire pressure lev- solid.
Page 424 422 STARTING AND OPERATING • Various Tire Pressure Monitoring System Messages, which display in the Electronic Vehicle Information Center (EVIC) • Tire Pressure Monitoring Telltale Light Tire Pressure Monitoring Low Pressure Warnings The Tire Pressure Monitoring Telltale Light will illumi- nate in the instrument cluster and an audible chime will be activated when one or more of the four active road tire pressures are low.
Page 425 STARTING AND OPERATING 423 the graphic display of the pressure value(s) will stop in place of the pressure value(s) indicating which Tire flashing, and the Tire Pressure Monitoring Light will Pressure Monitoring Sensor(s) is not being received. extinguish once the updated tire pressure(s) have been received.
Page 426 424 STARTING AND OPERATING text message will not be present, and a pressure value pressure values still shown. This indicates that the pres- will be displayed instead of dashes. A system fault can sure values are still being received from the TPM sensors occur with any of the following scenarios: but they may not be located in the correct vehicle position.
Page 427: General Information
STARTING AND OPERATING 425 3. However, after driving the vehicle for up to 20 min- long as no tire pressure is below the low-pressure utes above 15 mph (24 km/h), the Tire Pressure warning limit in any of the four active road tires. The Monitoring Telltale Light will flash on and off for 75 vehicle may need to be driven for up to 10 minutes seconds and then remain on solid.
Page 428: 2.0L And 2.4L Engine
426 STARTING AND OPERATING FUEL REQUIREMENTS than 87 can cause engine failure and may void or not be covered by the New Vehicle Limited Warranty. 2.0L And 2.4L Engine Poor quality gasoline can cause problems such as hard starting, stalling, and hesitations. If you experience these These engines are designed to meet all symptoms, try another brand of gasoline before consid- emissions regulations and provide opti-...
Page 429: Gasoline/Oxygenate Blends
STARTING AND OPERATING 427 Gasoline/Oxygenate Blends are not the responsibility of the manufacturer and may void or not be covered under New Vehicle Limited Some fuel suppliers blend unleaded gasoline with oxy- Warranty. genates such as ethanol. E-85 Usage In Non-Flex Fuel Vehicles CAUTION! Non-Flex Fuel Vehicles (FFV) are compatible with gaso- line containing up to 15% ethanol (E-15).
Page 430: Mmt In Gasoline
428 STARTING AND OPERATING MMT In Gasoline Materials Added To Fuel Methylcyclopentadienyl Manganese Tricarbonyl (MMT) Besides using unleaded gasoline with the proper octane is a manganese-containing metallic additive that is rating, gasolines that contain detergents, corrosion and blended into some gasoline to increase octane. Gasoline stability additives are recommended.
Page 431: Fuel System Cautions
STARTING AND OPERATING 429 Fuel System Cautions CAUTION! (Continued) • The use of fuel additives, which are now being CAUTION! sold as octane enhancers, is not recommended. Follow these guidelines to maintain your vehicle’s Most of these products contain high concentrations performance: of methanol.
Page 432: Carbon Monoxide Warnings
430 STARTING AND OPERATING Carbon Monoxide Warnings WARNING! (Continued) • Guard against carbon monoxide with proper main- WARNING! tenance. Have the exhaust system inspected every Carbon monoxide (CO) in exhaust gases is deadly. time the vehicle is raised. Have any abnormal Follow the precautions below to prevent carbon conditions repaired promptly.
Page 433 STARTING AND OPERATING 431 After removing the gas cap, place the gas cap tether cable CAUTION! over a hook on the inside of the fuel door. This keeps the • Damage to the fuel system or emission control gas cap suspended away from and protects the vehicle’s surface.
Page 434: Loose Fuel Filler Cap Message
432 STARTING AND OPERATING • If the gas cap is not tightened properly, the MIL will WARNING! come on. Be sure the gas cap is tightened every time • Never have any smoking materials lit in or near the the vehicle is refueled. vehicle when the gas cap is removed or the tank is Loose Fuel Filler Cap Message being filled.
Page 435: Vehicle Loading
STARTING AND OPERATING 433 VEHICLE LOADING The bar code allows a computer scanner to read the Vehicle Identification Number (VIN). As required by National Highway Traffic Safety Admin- istration regulations, your vehicle has a certification label Gross Vehicle Weight Rating (GVWR) affixed to the driver’s side door or B-Pillar.
Page 436 434 STARTING AND OPERATING Inflation Pressure The best way to figure out the total weight of your vehicle is to weigh it when it is fully loaded and ready for This is the cold tire inflation pressure for your vehicle for operation.
Page 437: Trailer Towing
STARTING AND OPERATING 435 Common Towing Definitions CAUTION! The following trailer towing related definitions will assist Do not load your vehicle any heavier than the you in understanding the following information: GVWR. If you do, parts on your vehicle can break, or Gross Vehicle Weight Rating (GVWR) it can change the way your vehicle handles.
Page 438 436 STARTING AND OPERATING The recommended way to measure GTW is to put your WARNING! fully loaded trailer on a vehicle scale. The entire weight of the trailer must be supported by the scale. It is important that you do not exceed the maximum front or rear GAWR.
Page 439 STARTING AND OPERATING 437 Trailer Sway Control tow vehicle’s front axle and the trailer axle(s). When used in accordance with the manufacturer’s directions, it pro- The trailer sway control is a telescoping link that can be vides for a more level ride, offering more consistent installed between the hitch receiver and the trailer tongue steering and brake control thereby enhancing towing that typically provides adjustable friction associated with...
Page 440: Trailer Hitch Classification
438 STARTING AND OPERATING Trailer Hitch Classification WARNING! (Continued) The following chart provides the industry standard for • Weight Distributing Systems may not be compat- the maximum trailer weight a given trailer hitch class can ible with Surge Brake Couplers. Consult with your tow and should be used to assist you in selecting the hitch and trailer manufacturer or a reputable Rec- correct trailer hitch for your intended towing condition.
Page 441: Trailer Towing Weights (Maximum Trailer Weight Ratings)
STARTING AND OPERATING 439 Trailer Towing Weights (Maximum Trailer Weight Ratings) The following chart provides the maximum trailer weight ratings towable for your given drivetrain. Maximum GTW (Gross Maximum Tongue Wt. Engine/Transmission Frontal Area Trailer Wt.) (See Note) 2.0L Auto/Man 22 sq ft (2.04 sq m) 1,000 lbs (450 kg) 150 lbs (68 kg)
Page 442: Trailer And Tongue Weight
440 STARTING AND OPERATING NOTE: The trailer tongue weight must be considered as part of the combined weight of occupants and cargo, and should never exceed the weight referenced on the Tire and Loading Information placard. Refer to “Tire Safety Information”...
Page 443: Towing Requirements
STARTING AND OPERATING 441 NOTE: Remember that everything put into or on the CAUTION! trailer adds to the load on your vehicle. Also, additional • Do not tow a trailer at all during the first 500 miles factory-installed options or dealer-installed options must be considered as part of the total load on your vehicle.
Page 444 442 STARTING AND OPERATING WARNING! WARNING! (Continued) Cross the chains under the trailer tongue and allow Improper towing can lead to a collision. Follow these enough slack for turning corners. guidelines to make your trailer towing as safe as • Vehicles with trailers should not be parked on a grade. possible: When parking, apply the parking brake on the tow •...
Page 445 STARTING AND OPERATING 443 Towing Requirements — Tires tire replacement procedures. Replacing tires with a higher load carrying capacity will not increase the • Do not attempt to tow a trailer while using a compact vehicle’s GVWR and GAWR limits. spare tire.
Page 446 444 STARTING AND OPERATING WARNING! CAUTION! • Do not connect trailer brakes to your vehicle’s If the trailer weighs more than 1,000 lbs (454 kg) loaded, it should have its own brakes and they hydraulic brake lines. It can overload your brake should be of adequate capacity.
Page 447 STARTING AND OPERATING 445 The electrical connections are all complete to the vehicle but you must mate the harness to a trailer connector. Refer to the following illustrations. Seven-Pin Connector 1 — Battery 5 — Ground 2 — Backup Lamps 6 —...
Page 448: Towing Tips
446 STARTING AND OPERATING Towing Tips NOTE: • Using a lower gear ratio while operating the vehicle Before setting out on a trip, practice turning, stopping, and backing up the trailer in an area located away from under heavy loading conditions, will improve perfor- heavy traffic.
Page 449 STARTING AND OPERATING 447 • Use speed control in flat terrain and with light loads to AutoStick — If Equipped maximize fuel efficiency. When using the AutoStick shift control, select the highest gear that allows for adequate performance and avoids Cooling System frequent downshifts.
Page 450: Recreational Towing (Behind Motorhome, Etc.)
448 STARTING AND OPERATING RECREATIONAL TOWING (BEHIND MOTORHOME, ETC.) Towing This Vehicle Behind Another Vehicle Towing Condition Wheels OFF the Ground Manual Transmission Automatic Transmission • Transmission in NEU- Flat Tow None NOT ALLOWED TRAL • Key in ACC Position Dolly Tow Front FWD Models ONLY...
Page 451 STARTING AND OPERATING 449 CAUTION! • DO NOT flat tow any vehicle equipped with an automatic transmission. Damage to the drivetrain will result. If these vehicles require towing, make sure all drive wheels are OFF the ground. • DO NOT dolly tow any 4WD vehicle. Internal damage to the transmission or transfer case will occur if a dolly is used when recreational towing.
Page 453 WHAT TO DO IN EMERGENCIES CONTENTS ▫ Road Tire Installation ....465 HAZARD WARNING FLASHERS ...453 IF YOUR ENGINE OVERHEATS .
Page 454 452 WHAT TO DO IN EMERGENCIES ▫ With Ignition Key .....486 SHIFT LEVER OVERRIDE ....483 TOWING A DISABLED VEHICLE .
Page 455: Hazard Warning Flashers
WHAT TO DO IN EMERGENCIES 453 HAZARD WARNING FLASHERS IF YOUR ENGINE OVERHEATS The Hazard Warning flasher switch is located on the In any of the following situations, you can reduce the instrument panel below the climate controls. potential for overheating by taking the appropriate action. •...
Page 456: Wheel And Tire Torque Specifications
454 WHAT TO DO IN EMERGENCIES CAUTION! WARNING! (Continued) to cool. Never try to open a cooling system pressure Driving with a hot cooling system could damage cap when the radiator or coolant bottle is hot. your vehicle. If the pointer rises to the H (red) mark, the instrument cluster will sound a chime.
Page 457 WHAT TO DO IN EMERGENCIES 455 **Use only your Authorized Dealer recommended lug Tighten the lug nuts/bolts in a star pattern until each nuts/bolts and clean or remove any dirt or oil before nut/bolt has been tightened twice. tightening. Inspect the wheel mounting surface prior to mounting the tire and remove any corrosion or loose particles.
Page 458: Jacking And Tire Changing
456 WHAT TO DO IN EMERGENCIES WARNING! WARNING! (Continued) • Being under a jacked-up vehicle is dangerous. The To avoid the risk of forcing the vehicle off the jack, vehicle could slip off the jack and fall on you. You do not tighten the lug nuts fully until the vehicle has could be crushed.
Page 459: Jack Location
WHAT TO DO IN EMERGENCIES 457 Jack Location Spare Tire Stowage The jack and jack-handle are stowed under the load floor The compact spare tire is stowed under the rear load floor in the cargo area. in the cargo area. Spare Tire Removal Lift up the load floor cover and remove the hold down.
Page 460: Jacking Instructions
458 WHAT TO DO IN EMERGENCIES 3. Set the parking brake. Jacking Instructions 4. Place the shift lever in PARK (automatic transmission) WARNING! or REVERSE (manual transmission). Carefully follow these tire changing warnings to 5. Turn OFF the ignition. help prevent personal injury or damage to your 6.
Page 461 WHAT TO DO IN EMERGENCIES 459 WARNING! (Continued) • Do not let anyone sit in the vehicle when it is on a jack. • Do not get under the vehicle when it is on a jack. If you need to get under a raised vehicle, take it to a Jack Warning Label service center where it can be raised on a lift.
Page 462 460 WHAT TO DO IN EMERGENCIES 1. Remove the scissors jack and lug wrench from the spare wheel as an assembly. Turn the jack screw to the left to loosen the lug wrench and remove the wrench from the jack assembly. NOTE: The jack handle attaches to the side of the jack with two attachment points.
Page 463 WHAT TO DO IN EMERGENCIES 461 NOTE: There are front and rear jacking locations on each side of the body. The front locations are outlined by two triangular cutouts on one of the flanges in the sill flange assembly. The rear location is the same but with two rectangular cutouts.
Page 464 462 WHAT TO DO IN EMERGENCIES CAUTION! Do not attempt to raise the vehicle by jacking on locations other than those indicated. Rear Jacking Location Front Jacking Location...
Page 465 WHAT TO DO IN EMERGENCIES 463 Do not raise the vehicle until you are sure the jack is 4. Using the swivel wrench raise the vehicle by turning securely engaged. the jack screw to the right. Raise the vehicle only until the tire just clears the surface and enough clearance is 3.
Page 466 464 WHAT TO DO IN EMERGENCIES WARNING! To avoid possible personal injury, handle the wheel covers with care to avoid contact with any sharp edges. NOTE: The wheel cover is held on the wheel by the wheel nuts. When reinstalling the original wheel, prop- erly align the wheel cover to the valve stem, place the wheel cover onto the wheel, then install the wheel nuts.
Page 467: Road Tire Installation
WHAT TO DO IN EMERGENCIES 465 8. Remove the wheel blocks and lower the jack until it is WARNING! free. Release the parking brake. Reassemble the lug wrench to the jack assembly and stow it in the spare A loose tire thrown forward in a collision or hard tire area.
Page 468 466 WHAT TO DO IN EMERGENCIES 2. Align the valve notch in the wheel cover with the valve 3. Install the five wheel lug nuts with the cone shaped end of stem on the wheel. Install the cover by hand. Do not use the nut toward the wheel.
Page 469: Tire Service Kit - If Equipped
WHAT TO DO IN EMERGENCIES 467 Vehicles Without Wheel Covers 5. After 25 miles (40 km) check the lug nut torque with a torque wrench to ensure that all lug nuts are properly 1. Mount the road tire on the axle. seated against the wheel.
Page 470: Tire Service Kit Components And Operation
468 WHAT TO DO IN EMERGENCIES Tire Service Kit Components And Operation Using The Mode Select Knob And Hoses Your Tire Service Kit is equipped with the following symbols to indicate the air or sealant mode. Selecting Air Mode Push in the Mode Select Knob (5) and turn to this position for air pump operation only.
Page 471: Tire Service Kit Usage Precautions
WHAT TO DO IN EMERGENCIES 469 Using The Deflation Button Push the Deflation Button (2) to reduce the air pressure in the tire if it becomes over-inflated. Tire Service Kit Usage Precautions • Replace the Tire Service Kit Sealant Bottle (1) and Sealant Hose (6) prior to the expiration date (printed at the lower right hand corner on the bottle label) to assure optimum operation of the system.
Page 472 470 WHAT TO DO IN EMERGENCIES • When the Tire Service Kit sealant is in a liquid form, • Do not lift or carry the Tire Service Kit by the hoses. clean water, and a damp cloth will remove the material from the vehicle or tire and wheel components.
Page 473: Sealing A Tire With Tire Service Kit
WHAT TO DO IN EMERGENCIES 471 WARNING! (Continued) WARNING! (Continued) – If you are unsure of the condition of the tire or with eyes or skin. Change clothing as soon as the wheel. possible, if there is any contact with clothing. •...
Page 474 472 WHAT TO DO IN EMERGENCIES 2. Verify that the valve stem (on the wheel with the 2. Uncoil the Sealant Hose (6) and then remove the cap deflated tire) is in a position that is near to the ground. from the fitting at the end of the hose.
Page 475 WHAT TO DO IN EMERGENCIES 473 NOTE: Manual transmission vehicles must have the 2. Connect the Power Plug (8) to a different 12 Volt parking brake engaged and the shift lever in NEUTRAL. power outlet in your vehicle or another vehicle, if available.
Page 476 474 WHAT TO DO IN EMERGENCIES quickly from approximately 70 psi (4.8 Bar) to the If the tire inflates to the recommended pressure or is at actual tire pressure when the Sealant Bottle (1) is least 26 psi (1.8 Bar) pressure within 15 minutes: empty.
Page 477 WHAT TO DO IN EMERGENCIES 475 CAUTION! WARNING! • The metal end fitting from Power Plug (8) may get Tire Service Kit is not a permanent flat tire repair. hot after use, so it should be handled carefully. Have the tire inspected and repaired or replaced after •...
Page 478 476 WHAT TO DO IN EMERGENCIES 3. Uncoil the Air Pump Hose (7) (black in color) and 2. Disconnect the Tire Service Kit from the valve stem, screw the fitting at the end of hose (7) onto the valve reinstall the cap on the valve stem and unplug from 12 stem.
Page 479: Jump-Starting Procedures
WHAT TO DO IN EMERGENCIES 477 (F) Sealant Bottle And Hose Replacement: 6. Verify that the cap is installed on the fitting at the end of the Sealant Hose (6) and return the hose to its 1. Uncoil the Sealant Hose (6) (clear in color). storage area (located on the bottom of the air pump).
Page 480: Preparations For Jump-Start
478 WHAT TO DO IN EMERGENCIES CAUTION! Do not use a portable battery booster pack or any other booster source with a system voltage greater than 12 Volts or damage to the battery, starter motor, alternator or electrical system may occur. WARNING! Do not attempt jump-starting if the battery is frozen.
Page 481 WHAT TO DO IN EMERGENCIES 479 WARNING! • Take care to avoid the radiator cooling fan when- ever the hood is raised. It can start anytime the ignition switch is ON. You can be injured by moving fan blades. • Remove any metal jewelry such as rings, watch bands and bracelets that could make an inadvertent electrical contact.
Page 482: Jump-Starting Procedure
480 WHAT TO DO IN EMERGENCIES 3. If using another vehicle to jump-start the battery, park CAUTION! the vehicle within the jumper cables reach, set the parking brake and make sure the ignition is OFF. Failure to follow these procedures could result in damage to the charging system of the booster vehicle WARNING! or the discharged vehicle.
Page 483 WHAT TO DO IN EMERGENCIES 481 4. Connect the opposite end of the negative (-) jumper 6. Once the engine is started, remove the jumper cables cable to a good engine ground (exposed metal part of in the reverse sequence: the discharged vehicle’s engine) away from the battery Disconnecting The Jumper Cables and the fuel injection system.
Page 484: Freeing A Stuck Vehicle
482 WHAT TO DO IN EMERGENCIES If frequent jump-starting is required to start your vehicle and REVERSE (with automatic transmission) or 2nd gear you should have the battery and charging system in- and REVERSE (with manual transmission), while gently spected at your authorized dealer. pressing the accelerator.
Page 485 WHAT TO DO IN EMERGENCIES 483 NOTE: Push the ESC Off switch, to place the Electronic WARNING! Stability Control (ESC) system in Partial Off mode, before rocking the vehicle. Refer to “Electronic Brake Fast spinning tires can be dangerous. Forces gener- Control”...
Page 486 484 WHAT TO DO IN EMERGENCIES 3. Using a small screwdriver or similar tool, remove the 4. Turn the ignition switch to the ACC or ON/RUN shift lever override access cover (located on the right position, but do not start the engine. side of the shift lever housing).
Page 487 WHAT TO DO IN EMERGENCIES 485 CVT Auto- Towing Wheels OFF Manual 6-Speed Automatic 6-Speed Automatic matic Trans- Condition the Ground Transmission (FWD Only) mission Flat Tow NONE If transmission is If transmission is • Transmis- operable: operable: ALLOWED • Transmission in •...
Page 488 486 WHAT TO DO IN EMERGENCIES With Ignition Key Front Wheel Drive (FWD) models (with 6-speed auto- matic only) may also be towed (under the same limita- Automatic Transmission tions shown above) with the rear wheels elevated. • Front Wheel Drive (FWD) vehicles can be towed with the front wheels elevated, or on a flatbed truck (all four CAUTION! wheels OFF the ground).
Page 489 WHAT TO DO IN EMERGENCIES 487 Manual Transmission CAUTION! • Front Wheel Drive (FWD) or Four-Wheel Drive (4WD) • DO NOT flat tow any disabled vehicle if condition vehicles can be flat towed (all four wheels on the is related to the clutch, transmission or driveline. ground) with the transmission in NEUTRAL.
Page 490 488 WHAT TO DO IN EMERGENCIES CAUTION! • Do not use sling-type equipment when towing. Vehicle damage may occur. • When securing the vehicle to a flatbed truck, do not attach to front or rear suspension components. Damage to your vehicle may result from improper towing.
Page 491 MAINTAINING YOUR VEHICLE CONTENTS ▫ Engine Oil Filter ..... .500 ENGINE COMPARTMENT — 2.0L ..491 ▫...
Page 492 490 MAINTAINING YOUR VEHICLE ▫ Automatic Transmission (Six-Speed) — If REPLACEMENT BULBS ....535 Equipped ......517 BULB REPLACEMENT .
Page 493: Engine Compartment - 2.0L
MAINTAINING YOUR VEHICLE 491 ENGINE COMPARTMENT — 2.0L 1 — Washer Fluid Reservoir 6 — Air Cleaner Filter 2 — Power Steering Fluid Reservoir 7 — Coolant Pressure Cap 3 — Engine Oil Fill 8 — Engine Oil Dipstick 4 — Brake Fluid Reservoir 9 —...
Page 494: Engine Compartment - 2.4L
492 MAINTAINING YOUR VEHICLE ENGINE COMPARTMENT — 2.4L 1 — Washer Fluid Reservoir 6 — Air Cleaner Filter 2 — Power Steering Fluid Reservoir 7 — Coolant Pressure Cap 3 — Engine Oil Fill 8 — Engine Oil Dipstick 4 — Brake Fluid Reservoir 9 —...
Page 495: Onboard Diagnostic System - Obd Ii
MAINTAINING YOUR VEHICLE 493 ONBOARD DIAGNOSTIC SYSTEM — OBD II CAUTION! Your vehicle is equipped with a sophisticated onboard • Prolonged driving with the MIL on could cause diagnostic system called OBD II. This system monitors further damage to the emission control system. It the performance of the emissions, engine, and automatic could also affect fuel economy and driveability.
Page 496: Emissions Inspection And Maintenance Programs
494 MAINTAINING YOUR VEHICLE persists, the message will appear the next time the Normally, the OBD II system will be ready. The OBD II vehicle is started. This might indicate a damaged cap. If system may not be ready if your vehicle was recently the problem is detected twice in a row, the system will serviced, recently had a dead battery or a battery replace- turn on the MIL.
Page 497: Replacement Parts
MAINTAINING YOUR VEHICLE 495 3. Approximately 15 seconds later, one of two things will system to update. A recheck with the above test routine happen: may then indicate that the system is now ready. • The MIL will flash for about 10 seconds and then Regardless of whether your vehicle’s OBD II system is return to being fully illuminated until you turn OFF ready or not, if the MIL is illuminated during normal...
Page 498: Dealer Service
496 MAINTAINING YOUR VEHICLE DEALER SERVICE MAINTENANCE PROCEDURES Your authorized dealer has the qualified service person- The pages that follow contain the required maintenance nel, special tools, and equipment to perform all service services determined by the engineers who designed your operations in an expert manner.
Page 499: Engine Oil
MAINTAINING YOUR VEHICLE 497 fully warmed engine is shut off. Do not check oil level CAUTION! (Continued) before starting the engine after it has sat overnight. • Your vehicle has been built with improved fluids Checking engine oil level when the engine is cold will that protect the performance and durability of your give you an incorrect reading.
Page 500 498 MAINTAINING YOUR VEHICLE Engine Oil Selection CAUTION! For best performance and maximum protection under all Do not overfill the engine. Overfilling the engine types of operating conditions, the manufacturer only will cause oil aeration, which can lead to loss of oil recommends engine oils that are API Certified and meet pressure and an increase in oil temperature.
Page 501 MAINTAINING YOUR VEHICLE 499 Lubricants which do not have both the engine oil certi- CAUTION! fication mark and the correct SAE viscosity grade num- ber should not be used. Do not use chemical flushes in your engine oil as the chemicals can damage your engine.
Page 502: Engine Oil Filter
500 MAINTAINING YOUR VEHICLE Disposing Of Used Engine Oil And Oil Filters Engine Air Cleaner Filter Care should be taken in disposing of used engine oil and Refer to the “Maintenance Schedule” in the “Mainte- oil filters from your vehicle. Used oil and oil filters, nance Schedules”...
Page 503: Maintenance-Free Battery
MAINTAINING YOUR VEHICLE 501 Engine Air Cleaner Filter Selection WARNING! (Continued) The quality of replacement engine air cleaner filters splashes in eyes or on skin, flush the area imme- varies considerably. Only high quality filters should be diately with large amounts of water. Refer to used to assure most efficient service.
Page 504: Air Conditioner Maintenance
502 MAINTAINING YOUR VEHICLE the condenser fins and a performance test. Drive belt tension CAUTION! should also be checked at this time. • It is essential when replacing the cables on the WARNING! battery that the positive cable is attached to the positive post and the negative cable is attached to •...
Page 505 MAINTAINING YOUR VEHICLE 503 A/C Air Filter CAUTION! Refer to the “Maintenance Schedule” for the proper Do not use chemical flushes in your air conditioning maintenance intervals. system as the chemicals can damage your air condi- tioning components. Such damage is not covered by WARNING! the New Vehicle Limited Warranty.
Page 506: Body Lubrication
504 MAINTAINING YOUR VEHICLE 4. Disengage the two retaining tabs that secure the filter 6. Install the A/C air filter with the arrow on the filter cover to the HVAC housing, and remove the cover. pointing toward the floor. When installing the filter cover, make sure the retaining tabs fully engage the cover.
Page 507: Windshield Wiper Blades
MAINTAINING YOUR VEHICLE 505 operation and to protect against rust and wear. Prior to Operation of the wipers on dry glass for long periods the application of any lubricant, the parts concerned may cause deterioration of the wiper blades. Always use should be wiped clean to remove dust and grit;...
Page 508: Exhaust System
506 MAINTAINING YOUR VEHICLE When refilling the washer fluid reservoir, take some Exhaust System washer fluid and apply it to a cloth or towel and wipe The best protection against carbon monoxide entry into clean the wiper blades, this will help blade performance. the vehicle body is a properly maintained engine exhaust To prevent freeze-up of your windshield washer system system.
Page 509 MAINTAINING YOUR VEHICLE 507 WARNING! CAUTION! • Exhaust gases can injure or kill. They contain • The catalytic converter requires the use of un- carbon monoxide (CO), which is colorless and leaded fuel only. Leaded gasoline will destroy the odorless. Breathing it can make you unconscious effectiveness of the catalyst as an emissions control and can eventually poison you.
Page 510 508 MAINTAINING YOUR VEHICLE Under normal operating conditions, the catalytic con- To minimize the possibility of catalytic converter dam- verter will not require maintenance. However, it is im- age: portant to keep the engine properly tuned to assure • Do not shut off the engine or interrupt the ignition, proper catalyst operation and prevent possible catalyst when the transmission is in gear and the vehicle is in damage.
Page 511: Cooling System
MAINTAINING YOUR VEHICLE 509 Cooling System applicable). If the engine coolant (antifreeze) is dirty or rusty in appearance, the system should be drained, WARNING! flushed, and refilled with fresh engine coolant (anti- freeze). Check the front of the A/C condenser for any •...
Page 512 510 MAINTAINING YOUR VEHICLE If the engine coolant (antifreeze) is dirty or contains CAUTION! (Continued) visible sediment, have an authorized dealer clean and Organic Additive Technology (OAT) engine cool- flush with OAT coolant (antifreeze) (conforming to ant is different and should not be mixed with MS.90032).
Page 513 MAINTAINING YOUR VEHICLE 511 • We recommend using MOPAR Antifreeze/Coolant 10 CAUTION! (Continued) Year/150,000 Mile Formula OAT (Organic Additive • This vehicle has not been designed for use with Technology) that meets the requirements of FCA Ma- propylene glycol-based engine coolant (antifreeze). terial Standard MS.90032.
Page 514 512 MAINTAINING YOUR VEHICLE NOTE: The cap should be inspected and cleaned if there is any accumulation of foreign material on the sealing surfaces. • Some vehicles require special tools to add coolant properly. Failure to fill these systems properly could WARNING! lead to severe internal engine damage.
Page 515 MAINTAINING YOUR VEHICLE 513 Disposal Of Used Engine Coolant The radiator normally remains completely full, so there is no need to remove the radiator cap unless checking for Used ethylene glycol-based engine coolant (antifreeze) is the coolant freeze point or replacing the engine coolant a regulated substance requiring proper disposal.
Page 516: Brake System
514 MAINTAINING YOUR VEHICLE • Make sure that the coolant expansion bottle overflow If an examination of your engine compartment shows no evidence of radiator or hose leaks, the vehicle may be hoses are not kinked or obstructed. safely driven. The vapor will soon dissipate. •...
Page 517 MAINTAINING YOUR VEHICLE 515 when the pads are replaced. However, low fluid level WARNING! may be caused by a leak and a checkup may be needed. Riding the brakes can lead to brake failure and NOTE: If your vehicle is equipped with a manual possibly a collision.
Page 518 516 MAINTAINING YOUR VEHICLE WARNING! WARNING! (Continued) cause it to boil unexpectedly during hard or pro- • Use only manufacturer’s recommended brake longed braking, resulting in sudden brake failure. fluid. Refer to “Fluids, Lubricants, And Genuine This could result in a collision. Parts”...
Page 519: Automatic Transmission (Six-Speed) - If
MAINTAINING YOUR VEHICLE 517 CAUTION! CAUTION! Use of improper brake fluids will affect overall clutch Using a transmission fluid other than the manufac- system performance. Improper brake fluids may dam- turer’s recommended fluid may cause deterioration age the clutch system resulting in loss of clutch func- in transmission shift quality and/or torque converter tion and the ability to shift the transmission.
Page 520 518 MAINTAINING YOUR VEHICLE CAUTION! CAUTION! Do not use chemical flushes in your transmission as If a transmission fluid leak occurs, visit your autho- the chemicals can damage your transmission compo- rized dealer immediately. Severe transmission dam- nents. Such damage is not covered by the New age may occur.
Page 521: Automatic Transmission (Cvt) - If Equipped
MAINTAINING YOUR VEHICLE 519 Automatic Transmission (CVT) — If Equipped CAUTION! Selection Of Lubricant (CVT) Using a transmission fluid other than the manufac- It is important to use the proper transmission fluid to turer’s recommended fluid may cause belt slip and ensure optimum transmission performance and life.
Page 522: Manual Transmission - If Equipped
520 MAINTAINING YOUR VEHICLE CAUTION! CAUTION! Do not use chemical flushes in your transmission as If a transmission fluid leak occurs, visit your autho- the chemicals can damage your transmission compo- rized dealer immediately. Severe transmission dam- nents. Such damage is not covered by the New age may occur.
Page 523: Rear Drive Assembly (Rda) - Awd/4Wd Models Only
MAINTAINING YOUR VEHICLE 521 Fluid Level Check Rear Drive Assembly (RDA) — AWD/4WD Models Only Check the fluid level by removing the fill plug. The fluid level should be between the bottom of the fill hole and a Lubricant Selection point not more than 3/16 inch (4.7 mm) below the bottom Use only the manufacturers recommended transmission of the hole.
Page 524: Power Transfer Unit (Ptu) - Awd/4Wd Models
522 MAINTAINING YOUR VEHICLE Power Transfer Unit (PTU) — AWD/4WD Models Appearance Care And Protection From Corrosion Only Protection Of Body And Paint From Corrosion Lubricant Selection Vehicle body care requirements vary according to geo- Use only the manufacturer’s recommended fluid. Refer graphic locations and usage.
Page 525 MAINTAINING YOUR VEHICLE 523 • If insects, tar, or other similar deposits have accumu- What Causes Corrosion? lated on your vehicle, use MOPAR Super Kleen Bug Corrosion is the result of deterioration or removal of and Tar Remover to remove. paint and protective coatings from your vehicle.
Page 526 524 MAINTAINING YOUR VEHICLE • If you carry special cargo such as chemicals, fertilizers, Special Care de-icer salt, etc., be sure that such materials are well • If you drive on salted or dusty roads or if you drive packaged and sealed. near the ocean, hose off the undercarriage at least once •...
Page 527 MAINTAINING YOUR VEHICLE 525 NOTE: If your vehicle is equipped with Dark Vapor or Stain Repel Fabric Cleaning Procedure — If Black Satin Chrome wheels DO NOT USE wheel cleaners, Equipped abrasives or polishing compounds. They will perma- Stain Repel seats may be cleaned in the following man- nently damage this finish and such damage is not cov- ner: ered by the New Vehicle Limited Warranty.
Page 528 526 MAINTAINING YOUR VEHICLE Interior Care WARNING! Use MOPAR Total Clean to clean fabric upholstery and Do not use volatile solvents for cleaning purposes. carpeting. Many are potentially flammable, and if used in Use MOPAR Total Clean to clean vinyl upholstery. closed areas they may cause respiratory harm.
Page 529 MAINTAINING YOUR VEHICLE 527 Glass Surfaces CAUTION! All glass surfaces should be cleaned on a regular basis Do not use Alcohol and Alcohol-based and/or Keton with MOPAR Glass Cleaner, or any commercial based cleaning products to clean leather seats, as household-type glass cleaner.
Page 530 528 MAINTAINING YOUR VEHICLE Instrument Panel Bezels 2. Dry with a soft cloth. Seat Belt Maintenance CAUTION! Do not bleach, dye, or clean the belts with chemical When installing hanging air fresheners in your ve- solvents or abrasive cleaners. This will weaken the fabric. hicle, read the installation instructions carefully.
Page 531: Fuses
MAINTAINING YOUR VEHICLE 529 WARNING! (Continued) WARNING! (Continued) • Before replacing a fuse, make sure that the ignition Damaged parts must be replaced immediately. Do not disassemble or modify the system. Seat belt assem- is off and that all the other services are switched off blies must be replaced after a collision if they have and/or disengaged.
Page 532: Integrated Power Module (Ipm)
530 MAINTAINING YOUR VEHICLE Integrated Power Module (IPM) The Integrated Power Module is located in the engine compartment near the air cleaner assembly. This center contains cartridge fuses and mini-fuses. A label that identifies each component may be printed on the inside of the cover.
Page 533 MAINTAINING YOUR VEHICLE 531 Cavity Cartridge Fuse Mini-Fuse Description 20 Amp Blue – Trailer Tow – If Equipped – 15 Amp Lt Blue AWD/4WD Control Module – If Equipped – 10 Amp Red Rear Center Brake Light Switch – 10 Amp Red Ignition Switch/Clock Spring –...
Page 534 532 MAINTAINING YOUR VEHICLE Cavity Cartridge Fuse Mini-Fuse Description – 20 Amp Yellow 115V AC Inverter – If Equipped – 20 Amp Yellow Cigar Lighter – 10 Amp Red Instrument Cluster 40 Amp Green – Radiator Fan – 15 Amp Lt Blue Dome Lamp/Sunroof/Rear Wiper Motor –...
Page 535 MAINTAINING YOUR VEHICLE 533 Cavity Cartridge Fuse Mini-Fuse Description – 15 Amp Lt Blue Power Sunroof – If Equipped – 10 Amp Red Heated Mirror – If Equipped – 15 Amp Lt Blue Auto Shutdown Relay – 10 Amp Red Airbag Control Module –...
Page 536 534 MAINTAINING YOUR VEHICLE Cavity Cartridge Fuse Mini-Fuse Description – 10 Amp Red J1962 Conn/Powertrain Con- trol Module 30 Amp Pink – Antilock BrakeValve 40 Amp Green – Antilock Brake Pump 30 Amp Pink – Headlamp/Washer Control/ Smart Glass – If Equipped –...
Page 537: Vehicle Storage
MAINTAINING YOUR VEHICLE 535 • Anytime you store your vehicle, or keep it out of VEHICLE STORAGE service (i.e., vacation) for two weeks or more, run the If you will not be using your vehicle for more than 21 air conditioning system at idle for about five minutes days, you may want to take steps to preserve your in the fresh air and high blower setting.
Page 538: Bulb Replacement
536 MAINTAINING YOUR VEHICLE Exterior Bulbs Bulb Number Low Beam/High Beam Headlamp Front Park/Turn Signal/Side Marker Lamp 3757KA Front Fog Lamp PSX24W Center High Mounted Stop Lamp (CHMSL) LED Assembly (Serviced At Authorized Dealer) Rear Tail/Turn/Stop Lamp 3157 Backup Lamp W16W (921) License Lamp BULB REPLACEMENT...
Page 539: Fog Lamps
MAINTAINING YOUR VEHICLE 537 3. Remove green connector from back of bulb by pulling straight back. 4. Twist the bulb to the left. 5. Pull bulb outward from assembly. NOTE: These are halogen bulbs. Take care not to touch the bulb with your fingers. Body oils from your fingers could cause excessive heat buildup which reduces bulb life.
Page 540: License Lamps
538 MAINTAINING YOUR VEHICLE License Lamps Center High-Mounted Stoplamp This light is an LED assembly. See your authorized dealer 1. Use a screw driver to gently pry against the side of the for replacement. snap tab to remove the lamp from the liftgate. 2.
Page 541: Fluids, Lubricants, And Genuine Parts
MAINTAINING YOUR VEHICLE 539 FLUIDS, LUBRICANTS, AND GENUINE PARTS Engine Component Fluid, Lubricant, or Genuine Part Engine Coolant We recommend you use MOPAR Antifreeze/Coolant 10 Year/150,000 Mile Formula OAT (Organic Additive Technology) or equivalent meeting the requirements of FCA Material Standard MS.90032. Engine Oil We recommend you use API Certified SAE 5W-20 Engine Oil, meeting the requirements of FCA US Material Standard MS-6395 such as MOPAR,...
Page 542 540 MAINTAINING YOUR VEHICLE CAUTION! CAUTION! (Continued) • Do not use water alone or alcohol-based engine • Mixing of engine coolant (antifreeze) other than coolant (antifreeze) products. Do not use additional specified Organic Additive Technology (OAT) en- rust inhibitors or antirust products, as they may not gine coolant (antifreeze), may result in engine be compatible with the radiator engine coolant and damage and may decrease corrosion protection.
Page 543: Chassis
MAINTAINING YOUR VEHICLE 541 Chassis Component Fluid, Lubricant, or Genuine Part Automatic Transmission (CVT) — If Equipped Use only MOPAR CVTF+4 Continuously Variable Transmis- sion Fluid or equivalent. Failure to use the correct fluid may affect the function or performance of your transmission. Automatic Transmission (Six-Speed)
Page 544 542 MAINTAINING YOUR VEHICLE Component Fluid, Lubricant, or Genuine Part Brake Master Cylinder We recommend you use MOPAR DOT 3, SAE J1703 should be used. If DOT 3, SAE J1703 brake fluid is not available, then DOT 4 is acceptable. Power Steering Reservoir We recommend you use MOPAR Power Steering Fluid +4, MOPAR ATF+4 Automatic Transmission Fluid.
Page 545: Maintenance Schedules
MAINTENANCE SCHEDULES CONTENTS ▫ Maintenance Chart.....547 MAINTENANCE SCHEDULE ....544...
Page 546 544 MAINTENANCE SCHEDULES MAINTENANCE SCHEDULE On Electronic Vehicle Information Center (EVIC) equipped vehicles, “Oil Change Required” will be dis- Your vehicle is equipped with an automatic oil change played in the EVIC and a single chime will sound, indicator system. The oil change indicator system will indicating that an oil change is necessary.
Page 547 MAINTENANCE SCHEDULES 545 NOTE: Under no circumstances should oil change inter- Once A Month Or Before A Long Trip: vals exceed 10,000 miles (16,000 km), twelve months or • Check engine oil level 350 hours of engine run time, whichever comes first. The •...
Page 548 546 MAINTENANCE SCHEDULES Required Maintenance Intervals. At Every Oil Change Interval As Indicated By Oil Change Indicator System: Refer to the maintenance schedules on the following • Change oil and filter. page for the required maintenance intervals. • Rotate the tires. Rotate at the first sign of irregu- lar wear, even if it occurs before the oil indicator system turns on.
Page 549 MAINTENANCE SCHEDULES 547 Maintenance Chart Refer to the Maintenance Schedules on the following pages for the required maintenance intervals. Mileage or time passed (whichever comes first) Or Years: 2 Or Kilometers: Additional Inspections Inspect the CV joints. Inspect front suspension, boot seals. tie rod ends, and replace if necessary.
Page 550 548 MAINTENANCE SCHEDULES Mileage or time passed (whichever comes first) Or Years: 2 Or Kilometers: Additional Maintenance Replace engine air cleaner filter. Replace air conditioning/cabin air filter. Replace spark plugs** Flush and replace the engine coolant at 10 years or 150,000 miles (240,000 km) whichever comes first.
Page 551 MAINTENANCE SCHEDULES 549 Mileage or time passed (whichever comes first) Or Years: 2 Or Kilometers: Change the automatic transmission fluid and filter. (CVT only) Change the automatic transmission fluid (six-speed only) if you frequently drive: on rough or unpaved roads, on mountain roads, on short trips, in heavy city traffic during hot weather, or if you use the ve- hicle for police, taxi, fleet, or frequent trailer towing.
Page 552 550 MAINTENANCE SCHEDULES Mileage or time passed (whichever comes first) Or Years: 2 Or Kilometers: Change the manual transmission fluid if using your vehicle for any of the following: trailer towing, heavy loading, taxi, police, delivery service (com- mercial service), off-road, desert operation or more than 50% of your driving is at sustained high speeds during hot weather, above 90°F (32°C).
Page 553 MAINTENANCE SCHEDULES 551 WARNING! • You can be badly injured working on or around a motor vehicle. Do only service work for which you have the knowledge and the right equipment. If you have any doubt about your ability to perform a service job, take your vehicle to a competent me- chanic.
Page 555 IF YOU NEED CONSUMER ASSISTANCE CONTENTS ▫ Customer Assistance For The Hearing Or Speech SUGGESTIONS FOR OBTAINING SERVICE FOR YOUR VEHICLE ..... . .555 Impaired (TDD/TTY).
Page 556 554 IF YOU NEED CONSUMER ASSISTANCE ▫ Traction Grades ..... . .562 DEPARTMENT OF TRANSPORTATION UNIFORM TIRE QUALITY GRADES ....561 ▫...
Page 557: Suggestions For Obtaining Service For Your Vehicle
IF YOU NEED CONSUMER ASSISTANCE 555 SUGGESTIONS FOR OBTAINING SERVICE FOR Be Reasonable With Requests YOUR VEHICLE If you list a number of items and you must have your vehicle by the end of the day, discuss the situation with Prepare For The Appointment the service advisor and list the items in order of priority.
Page 558: Fca Us Llc Customer Center
556 IF YOU NEED CONSUMER ASSISTANCE • Authorized dealer name facilities, factory-trained technicians, special tools, and the latest information to ensure the vehicle is fixed • Vehicle Identification Number (VIN) correctly and in a timely manner. • Vehicle delivery date and mileage This is why you should always talk to an authorized FCA US LLC Customer Center dealer service manager first.
Page 559: In Mexico Contact
IF YOU NEED CONSUMER ASSISTANCE 557 In Mexico Contact Customer Assistance For The Hearing Or Speech Impaired (TDD/TTY) Av. Prolongacion Paseo de la Reforma, 1240 To assist customers who have hearing difficulties, the Sante Fe C.P. 05109 manufacturer has installed special TDD (Telecommuni- Mexico, D.
Page 560 558 IF YOU NEED CONSUMER ASSISTANCE Warranty expires. The manufacturer stands behind only We appreciate that you have made a major investment the manufacturer’s service contracts. If you purchased a when you purchased the vehicle. An authorized dealer manufacturer’s service contract, you will receive Plan has also made a major investment in facilities, tools, and Provisions and an Owner Identification Card in the mail training to assure that you are absolutely delighted with...
Page 561: Warranty Information
IF YOU NEED CONSUMER ASSISTANCE 559 WARRANTY INFORMATION If NHTSA receives similar complaints, it may open an investigation, and if it finds that a safety defect exists in See the Warranty Information Booklet, located on the a group of vehicles, it may order a recall and remedy DVD, for the terms and provisions of FCA US LLC campaign.
Page 562: Publication Order Forms
560 IF YOU NEED CONSUMER ASSISTANCE defect to the Canadian government should contact Trans- Service Manuals port Canada, Motor Vehicle Defect Investigations and These comprehensive Service Manuals provide the infor- Recalls at 1-800-333-0510 or go to http://www.tc.gc.ca/ mation that students and professional technicians need in roadsafety/ diagnosing/troubleshooting, problem solving, maintain- ing, servicing, and repairing FCA US LLC vehicles.
Page 563: Department Of Transportation Uniform Tire Quality Grades
IF YOU NEED CONSUMER ASSISTANCE 561 Owner’s Manuals DEPARTMENT OF TRANSPORTATION UNIFORM TIRE QUALITY GRADES These Owner’s Manuals have been prepared with the The following tire grading categories were established by assistance of service and engineering specialists to ac- the National Highway Traffic Safety Administration. The quaint you with specific FCA US LLC vehicles.
Page 564: Traction Grades
562 IF YOU NEED CONSUMER ASSISTANCE significantly from the norm due to variations in driving Temperature Grades habits, service practices, and differences in road charac- The temperature grades are A (the highest), B, and C, teristics and climate. representing the tire’s resistance to the generation of heat and its ability to dissipate heat, when tested under Traction Grades controlled conditions on a specified indoor laboratory...
Page 565 IF YOU NEED CONSUMER ASSISTANCE 563 WARNING! The temperature grade for this tire is established for a tire that is properly inflated and not overloaded. Excessive speed, under-inflation, or excessive load- ing, either separately or in combination, can cause heat buildup and possible tire failure.
Page 567 INDEX...
Page 568 566 INDEX Adding Engine Coolant (Antifreeze) ... .511 Side Air Bags ......65 Adding Fuel .
Page 569 INDEX 567 Capacities ......538 Autostick......357, 359 Disposal .
Page 570 568 INDEX Bulbs, Light ......101, 535 Cargo Tie-Downs ......205 Car Washes .
Page 571 INDEX 569 Installing Child Restraints Using The Vehicle Seat Compass Variance ......259 Belt ........90 Connector Lower Anchors And Tethers For Children .
Page 572 570 INDEX Cupholders ......201 Remote Keyless Entry (RKE) ....30 Customer Assistance .
Page 573 INDEX 571 Emergency, In Case Of Oil Synthetic ......499 Jacking .......456 Overheating .
Page 574 572 INDEX Fluid Capacities ......538 Capacity ......538 Fluid Leaks .
Page 575 INDEX 573 Gauges Head Restraints ......156 Fuel ....... . .241 Heated Mirrors .
Page 576 574 INDEX Instrument Cluster ....229, 230, 244 Key, Replacement ......16 Instrument Panel And Controls .
Page 577 INDEX 575 Brake Warning ......226 Malfunction Indicator (Check Engine) ..233 Bulb Replacement .
Page 578 576 INDEX Luggage Rack (Roof Rack) ....209 Mini-Trip Computer ..... . .247 Lug Nuts .
Page 579 INDEX 577 Oil Change Indicator ..... . .252 Opener, Garage Door (HomeLink) ... . .181 Oil Change Indicator, Reset .
Page 580 578 INDEX Steering ......371, 372 Radiator Cap (Coolant Pressure Cap) ...512 Sunroof .
Page 581 INDEX 579 Remote Control Safety Checks Outside Vehicle ....101 Door Locks ......20 Safety Defects, Reporting .
Page 582 580 INDEX Seat Belt Reminder ......43 Rear Folding (Sedan) .....160 Seat Belts .
Page 583 INDEX 581 Snow Tires ......407 Steering Wheel Mounted Sound System Controls . . .315 Spare Tire .
Page 584 582 INDEX Tires ......101, 402, 408, 561 Sizes ....... .392 Aging (Life Of Tires) .
Page 585 INDEX 583 Cooling System Tips .....447 Turn Signals ..... .166, 244, 537 Hitches .
Page 586 584 INDEX Playing MP3 Files ..... . .300 System Operation ..... . .143 Uconnect (Hands-Free Phone) .
Page 587 INDEX 585 Windshield Wiper Blades ....505 Windshield Wipers ......170 Wiper Blade Replacement .
Page 588 INSTALLATION OF RADIO TRANSMITTING EQUIPMENT Special design considerations are incorporated into this The antenna cable should be as short as practical and vehicle’s electronic system to provide immunity to radio routed away from the vehicle wiring when possible. Use frequency signals. Mobile two-way radios and telephone only fully shielded coaxial cable.
Page 589 STICK WITH THE SPECIALISTS ® 16MK49-126-AB 16MK74-126-AA Second Edition First Edition ©2015 FCA US LLC. All Rights Reserved. Printed in U.S.A. Jeep is a registered trademark of FCA US LLC.

Save PDF